Anker SOLIX F3000 Portable Power Station
Package Contents
The package includes the following items:
- Anker SOLIX F3000 Portable Power Station
- AC Charging Cable
- High-Voltage PV Charging Cable
- Safety Manual
- Quick Start Guide
Names of Each Part
The Anker SOLIX F3000 Portable Power Station has several components:
Front View:
- 1. Ambient Light ?: Provides illumination.
- 2. Ambient Light Button: Controls the ambient light.
- 3. Main Power Button ?: Press and hold for 3 seconds to turn the unit on or off.
- 4. Reset Button ⚙️: Used for resetting the device.
- 5. IoT Button ?: Used for connecting to the Anker app.
- 6. Car Socket Output Button: Activates the car socket output.
- 7. USB-C Output Ports ?: For charging USB-C devices.
- 8. USB-A Output Ports ?: For charging USB-A devices.
- 9. Car Socket Port ?: Provides 12V power output.
- 10. AC Output Ports ?: For powering AC devices.
- 11. Anderson Port (DC Output Port): A DC output port. An Anderson connection cable is recommended. If creating a custom cable, consult a professional to ensure proper plug contact.
- 12. AC Output Button: Activates the AC output ports.
Side/Rear Views:
- 13. Retractable Handle: Pull out by pressing the button.
- 17. Casters: For mobility.
- 19. Handle: For carrying.
- 14. AC Input/Output Port ?: For AC power input and output.
- 15. Expansion Battery Port: Connects to expansion batteries.
- 16. Generator Input Port: Supports input from pure sine wave generators up to 3000W (100V).
- 18. High-Voltage PV Port ☀️: For connecting high-voltage solar panels.
- 20. High-Voltage PV Port ☀️: For connecting high-voltage solar panels.
- 21. Low-Voltage PV Port ☀️: For connecting low-voltage solar panels.
LCD Screen Display
The LCD screen provides real-time information:
- Remaining Time (Days/Hrs) ⏳: Estimated time the product can power connected devices at the current output.
- Recharge Time (Days/Hrs) ⏳: Estimated time to fully recharge the product.
- Battery Level (%) ?: Displays the current battery charge percentage.
- Output Power (W) ⚡: Shows the total power being drawn by connected devices.
- Input Power (W) ⚡: Shows the total power being received by the product.
- Frequency (Hz): Indicates the AC output frequency (50Hz or 60Hz).
Status Indicators:
- Low Temperature Warning ?️: Stop using the product until the icon disappears.
- High Temperature Warning ?️: Stop using the product until the icon disappears.
- Battery Level ?: Shows remaining battery percentage.
- Overload Warning ⚠️: Appears when any port is overloaded. The output for that port will turn off to prevent damage. Remove the overloaded device.
- Output Power ⚡: Displays the current output power.
- Input Power ⚡: Displays the current input power.
- USB-A Output Port ?: Indicates USB-A port activity.
- USB-C Output Port ?: Indicates USB-C port activity.
- DC Output Port ?: Lights up when the car socket button is pressed.
- AC Input/Output Port ?: Shows "IN" when receiving AC power, "OUT" when supplying AC power.
- IoT ?: Press and hold the IoT button for 2 seconds to enable app connectivity.
- AC Charging Frequency (Hz): Displays the frequency of AC input.
- Electric Vehicle Charging ?: Indicates when the product is in EV charging mode.
- Expansion Battery Connection: Appears when expansion batteries are connected correctly.
- Time until product is fully charged ⏳: Estimated time for a full charge.
Powering On/Off
Press and hold the main power button (3) for 3 seconds to turn the product on or off. The battery level icon will appear on the LCD screen when the device is powered on. The device will automatically turn off if no load is detected for 12 hours. Standby time can be configured via the Anker app.
Charging the Product
The "Battery Level" icon will appear when the battery level drops to 1%, indicating it's time to charge. The product supports simultaneous AC and DC charging for higher input power, with a maximum individual input power of 3000W.
Charging from Wall Outlet
When charging from a wall outlet using the AC charging cable, the maximum AC input power is 1500W (100V~15A). Connect the AC charging cable to an outlet and then to the product's AC INPUT/OUTPUT port.
Charging from EV Charger
Using the Anker Solix EV charging adapter (sold separately), connect to an EV charging stand cable and then to the product's AC INPUT/OUTPUT port. The product supports 100V~30A or 200V~15A charging (max 3000W) via the SAE J1772 standard. Note: DC fast charging standards like CHAdeMO are not supported. When the EV charging adapter is connected, the AC output ports are disabled.
Charging from External Power (Solar Panels)
The product can be charged via its High-Voltage PV and Low-Voltage PV ports, supporting a maximum solar input of 2400W.
- High-Voltage PV Port Wiring (11-165V, Max 17A, Max 1600W): Ensure the solar panel's open-circuit voltage (Voc) is within the 11-165V range. Exceeding 165V will damage the product.
- Low-Voltage PV Port Wiring (11-60V, Max 17A, Max 800W): Ensure the solar panel's open-circuit voltage (Voc) is within the 11-60V range. Exceeding 60V will damage the product. Ensure the total solar current is around 17A; exceeding this may limit power utilization. Anker Solix solar panels include MC4 connection cables. Connect panels according to the diagram.
Powering Devices
Powering from Outlet
Press the AC output button (12) and connect your devices to the AC output ports (10). The product functions as a UPS (Uninterruptible Power Supply), automatically switching to backup power within 20ms in case of a power outage.
Powering from USB Ports
Connect devices to the USB-A (8) or USB-C (7) ports. To conserve power, USB charging will automatically stop if the output current is 1W or less for 2 consecutive hours.
Powering from Car Socket
Connect devices to the car socket port (9). Charging will automatically stop after 5 hours if the port detects no power or outputs 3W or less.
Powering Electric Vehicles
Press the AC output button (12) twice to enable EV mode. Wait for the car icon to appear on the screen, then connect the device to the leftmost AC port. The product cannot be charged from an outlet simultaneously while in EV charging mode. An EV charging cable is not included and must be purchased separately.
Connecting Expansion Batteries
You can connect 1 to 3 Anker SOLIX BP3000 expansion batteries to increase the total capacity up to 12,288Wh. Refer to the Anker SOLIX BP3000 Expansion Battery User Guide for details.
- Capacity Expansion:
- 0 Expansion Batteries: 3,072Wh
- 1 Expansion Battery: 6,144Wh
- 2 Expansion Batteries: 9,216Wh
- 3 Expansion Batteries: 12,288Wh
Anker App
Remotely operate the product using the Anker app.
Downloading the App
Download the Anker app from the App Store (iOS) or Google Play (Android), or scan the provided QR code.
Account Registration / Skip
Register an account or select "Skip". Ensure your country or region is correctly set.
Adding This Product to Anker App
If you encounter connection issues, try the following:
- Ensure your Wi-Fi router supports 2.4GHz.
- Move the router closer to the product.
- Verify that the Wi-Fi password is correct.
After downloading the app, update the product's firmware. Connect to Wi-Fi and charge the product from an outlet during the update process.
Frequently Asked Questions (FAQ)
- What kind of solar chargers can I use to charge this product?
For High-Voltage PV input, solar panel voltage must be 11-165V, max 17A (1600W). Exceeding 165V will damage the product. For Low-Voltage PV input, solar panel voltage must be 11-60V, max 17A (800W). Exceeding 60V will damage the product. - How do I reset the product?
If the product is not functioning correctly, insert a thin object like a paperclip into the reset hole (4) for 1 second. If it still does not work, please contact customer support at support@anker.com. - Can I charge this product using a 200V AC generator?
The product currently only supports charging from 100V AC pure sine wave generators. It does not support 200V AC generators. - Can this product be charged by an EV charger?
Using the Anker SOLIX EV charging connector to connect to an EV charger, the product can be charged at a maximum output of 3,000W (100V~30A / 200V~15A). - How should I store and maintain it?
- Turn off the main power button when not in use.
- Store in a dry, cool environment.
- Check battery level regularly. If below 30%, charge to 100%.
- If not using for a long period, charge to 100% at least once every 3 months.
- Why doesn't the AC input/output icon on the LCD screen display correctly?
When connecting the AC charging cable or EV charging adapter to the product's AC input/output port (14), ensure the cable's lock knob is securely fastened. The AC input/output icon will display "AC In" when receiving AC power, or "AC Out" when supplying AC power. Refer to icon number 12 in the LCD screen display section for details.
Product Specifications
| Specification | Details |
|---|---|
| Battery Type | LFP |
| Rated Capacity | 3072Wh |
| AC Input (Normal) | AC Charging Cable: Max 100V~15A, Max 1500W, 50Hz/60Hz Max 100V~30A, Max 3000W, 50Hz/60Hz EV Charging Adapter: Max 200V~15A, Max 3000W, 50Hz/60Hz |
| AC Input (Pass-through) | Max 100V~15A, Max 1500W, 50Hz/60Hz |
| AC Output | 100V~15A, 50Hz/60Hz, 1500W per port, Max 3000W total |
| PV Input | High-Voltage PV Input: 11-165V = Max 17A (Max 1600W) Low-Voltage PV Input: 11-60V = Max 17A (Max 800W) |
| USB-C Output | 5V=3A / 9V=3A / 15V=3A / 20V=3A / 20V=5A (Max 100W per port) |
| USB-A Output | 5V=2.4A (Max 12W per port) |
| Car Socket Output | 12V = 10A |
| DC Output Port (Anderson Port) | 13.4V = 30A |
| Operating Temperature (Powering Devices) | -20°C to 40°C |
| Operating Temperature (Charging Product) | 0°C to 40°C |
| Weight (Unit Only) | Approx. 41.5 kg |
| Dimensions | Approx. 66.0 × 29.5 × 37.5 cm |
Customer Support
Warranty: Maximum 5-year warranty (Standard 18 months, extendable to 5 years by registering on the Anker Japan official website).
Technical Support:
- Email: support@anker.com ✉️
- Phone: 03 4455 7823 ?
