AUKEY MagFusion L Qi2 Foldable 2-in-1 Magnetic Wireless Charger

Product Overview

The AUKEY MagFusion L Qi2 is a foldable 2-in-1 magnetic wireless charger designed for modern devices. It offers fast charging capabilities and convenient magnetic alignment for compatible smartphones and earphones.

Charging Your Devices

This wireless charger supports fast charging up to 15W for iPhone 12 and later models running on iOS 17.2 or higher. A compatible USB-C power adapter (not included) is required.

Note: A charger above 30W is recommended for optimal performance.

Features

Suction Cup Mount

The suction cup on the bottom allows the charger to adhere firmly to clean, smooth, and flat surfaces. Press the button to release the suction cup.

LED Indicators

The charger uses LED lights to indicate its status:

• Power on: White light for 10 seconds, then turns off.
• Standby mode: Light off.
• Charging in process: Breathing light for 10 seconds, then turns off.
• Charging completed: Light off.
• Quick flash: (Indicates a specific state, potentially error or rapid charging phase)

Compatibility

Compatible Phones:

• iPhone 12 / 13 / 14 / 15 / 16 series
• Other Qi certified phones (requires a magnetic phone case)

Compatible Earphones:

• AirPods Pro 1 / 2
• AirPods 2 / 3 / 4
• Other models with wireless charging cases

Product Care and Precautions

• Keep away from liquids and extreme heat.
• Do not leave the product in humid, extremely hot, or cold places for extended periods.
• It is normal for the device to heat up slightly during charging. If it becomes too hot to operate, stop charging immediately.
• Do not place any objects other than compatible devices on top of this product.
• Charging with an object (especially metal) between the product and your device may cause heat or fire. Remove any case or smartphone ring containing metal before charging.
• If you use a cardiac pacemaker, consult your doctor before using this product.
• Keep magnetic cards (credit cards, cash cards, etc.) away from the product, as magnets may damage card data. AUKEY is not responsible for data damage caused by magnetic influence.

Safety and Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

RSS-Gen Issue 5 & RSS-Gen numro 5

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.

Compliance Marks

CE, FCC, EAC

This symbol ♻️ indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Specifications

Warranty & Customer Support

For questions, support, or warranty claims, please contact your seller directly.