速碼波科技
Instruction Manual for Smart Approach models including: Macaron N Series, Macaron N Series NFC Controller Module with Integrated Antenna, NFC Controller Module with Integrated Antenna, Controller Module with Integrated Antenna, Module with Integrated Antenna, Integrated Antenna
Getac Technology Corporation PN7160Z12 QYLPN7160Z12 QYLPN7160Z12 pn7160z12
File Info : application/pdf, 19 Pages, 1.71MB
DocumentDocumentMacaron N Series
SM-MSBTF-C01(ZX10 PN7160 NFC Module)
NFC Controller Module with Integrated Antenna
Datasheet Version 1.2
3F.-5, No. 1, Taiyuan 2nd St., Zhubei City, Hsinchu County 30288, Taiwan (R.O.C.) TEL: 886-3-5601363 Fax: 886-3-5601361 http://www.smart-approach.com.tw
SM-MSBTF-C01 Datasheet
Smart Approach Co., Ltd ("S.A.") retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under license under the patent right of any manufacturer.
Smart Approach Co., Ltd is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders.
Feedback on the use of any of the document is welcomed and encouraged by Smart Approach. Please contact service@smart-approach.com.tw for your feedback or any ordering inquiry. Please contact support@smart-approach.com.tw for any technical question.
Revision History
This section describes the changes that were implemented in this document. The changes are listed by revision, starting with the most current publication. Revision 1.0 Revision 1.0 of this datasheet was published in Jun. 2023. This was the first publication of the document. Revision 1.1 Revision 1.1 of this datasheet was published in Sep. 2023. Update card instructions and main board design reference. Add download mode concept. Revision 1.2
Revision 1.2 of this datasheet was published in Mar. 2024. Update NFC MODULE OUTLINE on page 18.
- 2 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
Contents
REVISION HISTORY............................................................................................................................ - 2 CONTENTS ........................................................................................................................................... - 3 FIGURE CONTENTS ............................................................................................................................ - 4 TABLE CONTENTS .............................................................................................................................. - 4 1 PRODUCT OVERVIEW ................................................................................................................ - 5 -
1.1 FEATURES............................................................................................................................... - 5 1.2 APPLICATION .......................................................................................................................... - 6 2 FUNCTIONAL DESCRIPTIONS ................................................................................................... - 8 2.1 COMMUNICATION OVERVIEW FOR ISO/IEC 14443A / MIFARE CONTROLLER ................................ - 9 3 ELECTRICAL SPECIFICATIONS .............................................................................................. - 10 3.1 PIN DESCRIPTION .................................................................................................................. - 10 3.2 I2C ADDRESS ........................................................................................................................ - 10 3.3 TEMPERATURE MAXIMUM RATINGS .........................................................................................- 11 3.4 DC ELECTRICAL PARAMETERS.................................................................................................- 11 3.5 ANTENNA SPECIFICATIONS ..................................................................................................... - 12 3.6 POWER CONSUMPTION ........................................................................................................... - 12 3.7 THERMAL PROTECTION .......................................................................................................... - 12 3.8 SYSTEM POWER MODES .......................................................................................................... - 13 3.9 RESET CONCEPT .................................................................................................................... - 14 3.10 DOWNLOAD MODE CONCEPT..................................................................................- 15 3.11 NFC CONNECTION RECOMMENDATION.................................................................................... - 16 3.12 MAIN BOARD DESIGN REFERENCE .......................................................................................... - 16 4 ORDERING INFORMATION......................................................................................................- 17 5 NFC MODULE OUTLINE ........................................................................................................... - 18 -
- 3 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
Figure Contents
Figure 1 Typical Application .................................................................................................................- 5 Figure 2 Typical Application II .............................................................................................................- 7 Figure 3 Module Block Diagram...........................................................................................................- 8 Figure 4 Transmission Modes ...............................................................................................................- 9 Figure 5 Reset via VEN Pin ..................................................................................................................- 14 Figure 6 Download Mode Sequence....................................................................................................- 15 Figure 7 Connection Recommendation ...............................................................................................- 16 Figure 8 Main Board Design W/O UICC Reference...........................................................................- 16 Figure 9 Antenna Module Drawing.....................................................................................................- 18 Figure 10 Module FPC Connection Footprint (Button Contact).........................................................- 19 Figure 11 FPC Wire Dimension ..........................................................................................................- 19 -
Table Contents
Table 1 Module Pin Description..........................................................................................................- 10 Table 2 I2C Address .............................................................................................................................- 10 Table 3 Temperature Maximum Ratings ............................................................................................. - 11 Table 4 DC Electrical Specification .................................................................................................... - 11 Table 5 Antenna Specifications ...........................................................................................................- 12 Table 6 Current Consumption .............................................................................................................- 12 Table 7 Thermal Protection .................................................................................................................- 12 Table 8 System Power Mode Configuration........................................................................................- 13 Table 9 System Power States...............................................................................................................- 14 Table 10 Reset Timing.........................................................................................................................- 14 Table 11 Download Mode Timing........................................................................................................- 15 Table 12 Ordering Information Table ..................................................................................................- 17 -
- 4 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
1 Product Overview
SM-MSBTF-C01 is full featured NFC controllers designed for integration in portable equipment. It is optimized for low power consumption with fully host controllable power states and for small footprint for portable equipment applications. The module's compact, flexible design with and exposed pad is optimal for size-sensitive applications, assures robust performance. The following illustration shows a high-level, generic view of a SM-MSBTF-C01 application.
Smart Approach MSBTF
NFC Controller Module
14 Microcontroller Unit
Laptop/PC/Tablet
1.1 Features
Figure 1 Typical Application
Highly integrated demodulator and decoder Buffered output drivers to connect an antenna with minimum number of external
components Integrated RF level detector Integrated Polling Loop for automatic device discovery RF protocols supported
ISO/IEC 14443A, ISO/IEC 14443B PICC mode ISO/IEC 14443A, ISO/IEC 14443B PCD mode designed according to NFC Forum digital protocol T4T platform and ISO-DEP FeliCa PCD mode MIFARE PCD encryption mechanism (MIFARE 1K/4K) NFC Forum tags T1T, T2T, T3T, T4T and T5T NFCIP-1, NFCIP-2 protocol NFC Forum certification for P2P, reader and card mode FeliCa PICC mode ISO/IEC 15693/ICODE VCD mode NFC Forum-compliant embedded T4T for NDEF short record
- 5 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
Supported host interfaces NCI protocol interface according to NFC Forum standardization I2C-bus High-speed mode
Flexible clock supply concept to facilitate PN7160 integration Internal oscillator for 27.12 MHz crystal connection Integrated PLL unit to make use of device reference clock and facilitate PN7160 integration
Integrated power management unit Direct connection to a battery (2.3 V to 5.5 V voltage supply range) Support different low-power states configuration: Hard Power-Down state and Standby states activated by firmware Autonomous mode when host is shut down
Automatic wake-up via RF field, internal timer and I2C-bus interface Integrated non-volatile memory to store data and executable code for customization
Anti tearing support to recover from tearing events Standards compliance
NFC Forum Device Requirements NCI 2.0 *All card types and it's protocol shall follow NXP's and NFC forum recommendation. Cards that comply with the protocol are subject to testing with the host.
1.2 Application
Suggested applications for the SM-MSBTF-C01 module include: Mobile devices Portable equipment (personal digital assistants, tablet, notebook, wearable) Consumer devices Smart home gateways
- 6 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
Figure 2 Typical Application II SM-MSBTF-C01 can be connected on a host controller through I2C-bus interfaces. The logical interface towards the host base band is NCI-compliant with additional command set for SA specific product features. Moreover, SM-MSBTF-C01 provides flexible and integrated power management unit in order to preserve energy supporting Powered by the Field and Power Off mode.
- 7 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
2 Functional Descriptions
This section provides detailed information about how SM-MSBTF-C01 module works, what configurations and operational features are available. The following illustration shows the primary functional blocks of SM-MSBTF-C01 module.
Figure 3 Module Block Diagram Loop Antenna is Smart Approach customize solution, Antenna size of SM-MSBTF-C01 is 45mm x 35 mm. Antenna matching is also a customize solution. NFC controller includes NXP PN7160 chipset, and has an I2C control interface through the connector to mother board.
- 8 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
1. According to ISO/IEC 18092(Ecma 340)standard. 2. PICC only for android HCE.
Figure 4 Transmission Modes
For contactless card functionality, SM-MSBTF-C01 can act autonomously if previously configured by the host in such a manner.
2.1 Communication overview for ISO/IEC 14443A / MIFARE Controller The contactless coprocessor and the on-chip CPU of SM-MSBTF-C01 handle the complete ISO/IEC 14443A/MIFARE RF-protocol, nevertheless a dedicated external host has to handle the application layer communication.
- 9 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
3 Electrical Specifications
This section provides the DC characteristics, AC characteristics, recommended operating conditions. It includes information on the various timing functions of the module.
3.1 Pin Description
The following Table shows the pin description for SM-MSBTF-C01 module. The connection ground is internally connected and should be connected to GND on the main board as well.
Table 1 Module Pin Description
PIN No.
Name
1
VBAT
Battery Supply Voltage
Description
2
VBAT
Battery Supply Voltage
3
I2C_SCL I2C-bus Clock Line
4
I2C_SDA I2C-bus Data Line
Interrupt request from module to platform,
5
IRQ
Normal : Low; Interrupt : High
Reset pin input from the host to wake up the device from
6
VEN
standby and also to reset the device, Normal : High; Reset : Low
7 DWL_REQ Firmware download control: Normal : Low; Active : High
8 Reserve2 N.C.
9 Reserve1 N.C.
10 MOD_GND Module Ground
11 MOD_GND Module Ground
12 VDD_IO Pad Supply Voltage
13
VANT N.C.
14 MOD_GND Module Ground
Power Reference
3.3V 3.3V VDD_IO VDD_IO
VDD_IO
VBAT
VDD_IO -
GND GND 1.8V/3.3V
GND
P/I/O P P I I/O
O
I
I P P P P
3.2 I2C Address
SM-MSBTF-C01 I2C 7bit address is defined to 0x28. To write data, this module is addressed using 0x50, to read data, this module is addressed using 0x51.
Table 2 I2C Address I2C address (R/W=0, write) 0x50
I2C address (R/W=1, read) 0x51
- 10 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
3.3 Temperature Maximum Ratings Thermal specifications for this module have been modeled using a two-layer test board.
Table 3 Temperature Maximum Ratings
Symbol
Definition
Operating T
Temperature
Storage
TS
Temperature
Value
Min
Max
-25
85
-40
100
Units
3.4 DC Electrical Parameters DC Electrical specifications for this module have been modeled using a two-layer test board.
Table 4 DC Electrical Specification
Value
Symbol Definition
Min
Typ
Max
VBAT Power Supply
3.1
3.3
5.5
IVBAT
DC Current
290
Note:
1. continuous total current consumption in PCD mode at VBAT = 3.6 V
Units
Volts mA
Note (1)
- 11 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
3.5 Antenna Specifications Antenna specifications for this module have been modeled using a two-layer test board.
Table 5 Antenna Specifications
Item
Value
Min
Typ
DC
Resistance AC
Impedance Frequency
0.5 13.06
1
50 13.56
Q factor Antenna
Type Size
25
30
FR4 Loop Coil
(45 ±0.3) X (35±0.3)
Max 2
14.06 35
Unit
Note
MHz
Add the Ferrite sheet
mm
3.6 Power Consumption
Table 6 Current Consumption
Symbol
Parameter
Conditions Min
Typ
Max
Unit
IHPD
Hard power down current VBAT=3.6V, VEN=0V
-
10
24
A
ISTBY
Standby state current VBAT=3.6V
-
20
35
A
IACT
Active state current
VBAT=3.6V
-
4.55
-
mA
ITVDD Transmitter supply current VBAT=3.6V
-
240
-
mA
*Active state : Idle and Listenser modes.
3.7 Thermal Protection
Table 7 Thermal Protection
Symbol
Parameter
Conditions Min
Typ
Max
Unit
TOVERTEMP
Temperature protection trigger
-
125
125
0C
- 12 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
3.8 System power modes
Table 8 System Power Mode Configuration
VBAT Off
VDD_IO X
VEN
X
Power Off
On
X
Off
Hard Power Down
On
Off
On
Standby
On
On
On
Active
Note: X: Don't care
Power mode
Table 9 System Power States
Power State name
Description
Hard Power Down
The MSBTF is supplied by VBAT within its operating range and MSBTF is kept in Hard Power Down (VEN voltage is kept low by host or SW programming) to have the minimum power consumption. The system mode is in Power Off.
The MSBTF is supplied by VBAT within its operating range, VEN voltage is high (by host or SW programming) and minimum part of MSBTF is kept supplied to
Standby
enable configured wake-up sources which allow to switch to Active state; RF
field, Host interface (if VDD_IO is high). The system mode is Low-power mode
or Full power mode.
Active
The MSBTF is supplied by VBAT within its operating range, VEN voltage is high (by host or SW programming), VDD_IO is high and the MSBTF internal blocks are supplied. 3 sub-modes are defined: Idle, Listener and Poller. The system mode
is Full power mode.
- 13 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet 3.9 Reset concept To enter reset, the VEN voltage shall be set to low (this is also the Hard Power Down state): Reset means resetting the embedded FW execution and the registers values to their default values. Parts of these default values are defined from EEPROM data loaded values, others are hardware defined. To get out of reset: · Pulling VEN voltage high with VBAT within its operating range
VDD_IO
Table 10 Reset Timing
Symbol Parameter
tWL(VEN)
pulse width VEN LOW
tboot
boot time
Figure 5 Reset via VEN pin
Condition
Min
Typ
to reset
10
-
-
-
Max
Unit
-
s
2.5
ms
- 14 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
3.10 Download mode concept To enter this mode, the pin DWL_REQ shall be pulled to VDD_IO before reset via VEN pin is done.
Figure 6 Download mode sequence
Table 11 Download mode Timing
Symbol
Parameter
tt(DWL_REQ-VEN)
transition time from pin DWL_REQ to pin VEN
Condition
Min Typ Max Unit
DWL_REQ, VEN
0
0.5
- ms
voltages = HIGH
- 15 -
All specifications will vary according to the customer's environment.
3.11 NFC Connection Recommendation
SM-MSBTF-C01 Datasheet
Figure 7 Connection Recommendation 3.12 Main Board Design Reference
I2C_SDA, I2C_SCL, VEN, DWL_REQ, IRQ have pull-up or pull-down resistors inside the module, the main board is recommended to reserve the pull-up or pull-down resistors position (not SMD components).
Figure 8 Main Board Design W/O UICC Reference
- 16 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
4 Ordering Information
Table 12 Ordering Information Table
Order Number
Descriptions
SM-MSBTF-C01
NFC Macaron Module (NXP PN7160) with Integrated Antenna
Dimension
Module: 71.62 x 35 x 2.1 mm
- 17 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet
5 NFC Module Outline
The following illustration shows the package drawing for SM-MSBTF-C01 module. The drawing contains the detail views, dimensions, tolerances and notes.
Pin 1
Figure 9 Antenna Module Drawing
- 18 -
All specifications will vary according to the customer's environment.
SM-MSBTF-C01 Datasheet Figure 10 Module FPC Connection Footprint (Button Contact)
Figure 11 FPC Wire Dimension
- 19 -
All specifications will vary according to the customer's environment.