Moen Koa™ Single Handle Pullout Kitchen Faucet
Specifications
Product Overview
The Moen Koa™ faucet is a single-handle pullout kitchen faucet designed for modern kitchens. It combines functionality with durable construction and advanced spray technology.
Description
- Metal construction with various finishes identified by suffix.
- Features Power Clean™ spray technology for efficient cleaning.
- Includes a pullout spray with a 59-inch braided hose.
- Equipped with flexible supplies and 3/8-inch compression fittings for easy installation.
Operation
- Lever style handle for intuitive control.
- Handle travel offers a 100° arc for temperature control.
- Spout rotation provides a 120° range of motion.
- Operates with less than 5 lbs. of force, ensuring ease of use.
- Can operate in stream or spray mode, adaptable to the pullout or retracted position.
Flow Rate
Flow is limited to 1.5 gallons per minute (5.7 L/min) at 60 psi.
Cartridge
Utilizes the 1255™ Duralast™ cartridge for reliable performance.
Standards & Compliance
- Third-party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1, and all applicable requirements including NSF 61/9 & 372.
- Meets CalGreen and Georgia SB370 requirements.
- Complies with California Proposition 65 and the Federal Safe Drinking Water Act.
- Features a backflow protection system consisting of two independently operating check valves (primary and secondary) to prevent backflow.
- ADA compliant for lever handle operation [ADA compliant].
Warranty
- Lifetime limited warranty against leaks, drips, and finish defects for the original homeowner.
- 10-year limited warranty when used in a multifamily installation.
- 5-year limited warranty when used in a commercial installation.
- For complete details and limitations, visit www.moen.com/support.
Installation Notes
Designed to install through 1, 2, 3, or 4 holes, each with a 1-1/2 inch (38mm) diameter.
Critical Dimensions
The following dimensions are critical for installation and reference (diagram not to scale):
- Spout Height: 6-11/16 inches (170mm)
- Spout Reach: 8-7/16 inches (214mm)
- Faucet Body Height from Deck: 10-5/32 inches (258mm)
- Handle Height from Deck: 10-13/32 inches (264mm)
- Spout Arc Height: 9-1/4 inches (235mm)
- Maximum Deck Thickness: 2-1/2 inches (64mm)
- Base Diameter: 2-5/32 inches (55mm)
- Overall Faucet Assembly Height (approximate, from supply line connection to top of handle): 28-1/2 inches (724mm)
The faucet is designed to be mounted on a sink deck or countertop.
Contact Information
For more information, call 1-800-BUY-MOEN or visit www.moen.com.