Valberg TT4113CS625C Refrigerator Exploded View Parts Diagram
This document provides an exploded view diagram of the Valberg TT4113CS625C refrigerator, detailing its various components and their assembly points. The diagram illustrates the refrigerator's structure from the exterior panels to internal functional parts.
Refrigerator Components
- 1: Refrigerator Door: The main external door of the appliance.
- 1.1: Door Gasket: The seal around the edge of the door to maintain insulation.
- 1.2.1: Door Handle Attachment Point: Indicates where the door handle is secured.
- 2: Shelves/Drawers: Multiple identical storage compartments, likely for the refrigerator section.
- 3: Crisper Drawer: A specific drawer, typically for storing vegetables and fruits.
- 4: Door Seal: Refers to the gasket system, possibly a separate part or section of the main gasket.
- 5: Internal Compartment Liner/Panel: A panel within the refrigerator or freezer compartment, likely housing the handle mechanism.
- 5.1: Mounting Points: Areas on the panel for attaching other components or securing the panel itself.
- 5.2: Handle: The external handle attached to the door or internal panel.
- 8, 9: Fasteners/Clips: Small parts used for assembly and securing components.
- 10: Shelf Supports/Rails: Brackets or tracks inside the refrigerator for supporting shelves.
- 12, 13, 14, 24, 25, 26, 27: Cooling System Components: A group of parts, likely related to the evaporator fan and motor assembly, including fan blades, motor housing, and electrical connections.
- 15, 16, 17: Bottom Tray Assembly: Components located at the base of the refrigerator, potentially including a drip tray or a lower storage bin.
- 18: Top Cover/Lid: The panel covering the top of the refrigerator unit.
- 20, 21, 22: Hinge Components/Mounting Brackets: Parts associated with the door hinges or internal mounting structures.
- 28: Drain Outlet: An opening or tube for draining condensation.
- 29: Leveling Foot: An adjustable foot at the base of the refrigerator for stability.
- 30: Base Mounting Hardware: Various small parts for attaching components to the base.
- 34: Compressor Mounting Bracket: A bracket designed to hold the compressor in place.
- 36, 37, 38, 45: Wiring and Mounting Hardware: Electrical wires, conduits, and fasteners used for connecting and securing the compressor and related electrical components.
- 39: Compressor: The main refrigeration unit responsible for circulating refrigerant.
- 42: Evaporator Fan Assembly/Mounting: A component related to air circulation within the cooling system.
- 44: Electrical Connection Block: A terminal block for electrical connections.
