VALBERG SBS605AX625C Refrigerator Parts Identification

This document provides an exploded view and detailed identification of the components for the VALBERG SBS605AX625C refrigerator. The diagram illustrates the assembly of various parts, crucial for understanding the appliance's structure and for service or replacement purposes.

Part 1:

Main Refrigerator Cabinet: The primary housing structure of the appliance.

Part 1.1:

Door Frame Component: Part of the frame around the refrigerator door.

Part 1.2:

Door Frame Component: Part of the frame around the refrigerator door.

Part 2:

Refrigerator Door (Left): The main door for the refrigerator compartment.

Part 2.1:

Door Handle (Left): The handle for opening the left refrigerator door.

Part 2.2.1:

Door Hinge Component: A part of the hinge mechanism for the left door.

Part 2.2.2:

Door Hinge Component: A part of the hinge mechanism for the left door.

Part 4:

Shelf Support Rail: A component that supports or guides refrigerator shelves.

Part 5:

Mounting Clip or Bracket: A small component used for securing other parts.

Part 6:

Crisper Drawer: A drawer designed for storing fruits and vegetables.

Part 7:

Fan Housing/Assembly: The enclosure for the internal cooling fan.

Part 8:

Refrigerator Shelf: A shelf within the main refrigerator compartment.

Part 9:

Shelf Support Runner: A component that the shelves rest on or slide within.

Part 10:

Door Bin/Shelf: A shelf located on the inside of the refrigerator door.

Part 11:

Door Bin Support Clip: A clip or bracket for attaching door bins.

Part 12:

Drawer Runner: A track or slide for the smooth operation of drawers.

Part 13:

Glass Shelf: A shelf made of glass, typically for the main compartment.

Part 14:

Duct or Cover Component: A part likely related to air circulation or covering internal components.

Part 15:

Drip Tray/Water Collector: A tray positioned to catch condensation or spills.

Part 16:

Crisper Drawer: A drawer for storing fruits and vegetables.

Part 17:

Crisper Drawer: A drawer for storing fruits and vegetables.

Part 18:

Fastener (Screw): A screw used for assembly.

Part 19:

Fastener (Screw): A screw used for assembly.

Part 20:

Cover or Bracket: A component used for covering or supporting other parts.

Part 21:

Door Seal/Gasket: The rubber seal around the door to maintain insulation.

Part 23:

Shelf Support Bracket: A bracket that supports a shelf.

Part 24:

Shelf Support Bracket: A bracket that supports a shelf.

Part 25:

Shelf Support Bracket: A bracket that supports a shelf.

Part 26:

Crisper Drawers: Multiple drawers for storing fruits and vegetables.

Part 27:

Control Panel Assembly: The unit containing buttons, display, and user interface.

Part 28:

Electronic Control Board/Wiring: The main circuit board and associated wiring.

Part 29:

Evaporator Cover/Shroud: A protective cover for the evaporator fan and coil.

Part 30:

Compressor Mounting Bracket: A bracket for securing the compressor unit.

Part 31:

Fan Motor: The motor that drives the cooling fan.

Part 32:

Evaporator Fan: The fan that circulates cold air within the refrigerator.

Part 33:

Evaporator Coil/Assembly: The heat exchanger where cooling occurs.

Part 34:

Air Duct: A channel for directing airflow within the appliance.

Part 34.1:

Air Duct Component: A specific part of the air duct system.

Part 35:

Air Duct Cover/Grille: A cover or grille for the air duct opening.

Part 36:

Top Panel/Cover: The panel located at the top of the refrigerator.

Part 38:

Fastener (Screw): A screw used for assembly.

Part 39:

Mounting Bracket/Support: A bracket used for securing components.

Part 39.1:

Mounting Bracket Component: A part of a mounting bracket.

Part 40:

Fastener (Screw): A screw used for assembly.

Part 42:

Rear Panel/Cover: The panel located at the back of the refrigerator.

Part 42.1:

Rear Panel Component: A part of the rear panel.

Part 44:

Sensor or Connector: A component likely involved in monitoring or electrical connection.

Part 45:

Rear Grille/Ventilation Cover: A grille at the back for ventilation.

Part 46.1:

Leveling Foot: An adjustable foot for stabilizing the appliance.

Part 46.2:

Leveling Foot: An adjustable foot for stabilizing the appliance.

Part 47:

Air Duct/Vent: A component for directing or venting air.

Part 48:

Tubing/Pipe: A flexible or rigid tube for fluid or gas transfer.

Part 50:

Water Tank/Filter Housing: A component for holding water or a filter.

Part 51:

Water Pump/Valve: A component for managing water flow.

Part 52:

Water Line Connection: The point where the water supply connects.

Part 53:

Drain Tube/Connection: A tube for draining water.

Part 54:

Base Component: A part of the lower structure of the refrigerator.

Part 55:

Base Assembly/Mounting Plate: The main base structure or plate.

Part 56:

Leveling Foot: An adjustable foot for stabilizing the appliance.

Part 57:

Drain Plug/Fitting: A plug or fitting for a drain port.