Advantech Wzzard™ Mesh Wireless Sensor Nodes
Monitoring Nodes – Commercial Applications
The Wzzard mesh intelligent wireless sensor platform creates a complete, quick, and easy connectivity stack between your sensors and your application, on your network or on the Internet. The platform uses Wzzard mesh wireless sensor nodes and a wireless 802.15.4e SmartMesh IP network to transmit sensor data to the gateway. The SmartSwarm 342 gateway connects to the Internet via wired connections or cellular data networks.
Features
- Ultra-low power 802.15.4e SmartMesh IP technology
- Communicates with SmartSwarm 342 gateway via a highly scalable and reliable wireless mesh network
- Internal temperature & humidity sensing support
- Connect to industry standard analog or digital sensors
- MQTT and JSON IoT protocol to application platform
- Wide operating temperature range
- Monitor refrigeration, food processing/storage or light stacks
Product Models and Descriptions
| Model No. | Description |
|---|---|
| BB-WCD1H2102H | Wzzard Mesh Wireless 802.15.4e Sensor Node: HVAC/Cooler Node for Temperature & Humidity Sensing. Features 2 Analog Inputs (AI), 1 Digital Input (DI), 1 Thermistor, Internal Temperature & Humidity, Internal Antenna. |
| BB-WCD1H3001HP100 | Wzzard Mesh Wireless 802.15.4e Sensor Node: Commercial Stacklight Node for Light Sensing. Features 3 Analog Inputs (AI), 1 Battery Voltage (vBat) Output, Internal Antenna. Internal Temperature & Humidity supported. |
Accessories - Sold Separately
- BB-WCHMS - Door sensor cable (open/close)
- BB-WCHCBL - Thermistor/Breakout sensor cable
- BB-LSSCBL - Light sensor cable (stack light)
- BB-JC10F50V - 50A clamp-on current sensor (compressor, fan)
Starter Kits Available
Refrigeration/Cooler Monitoring
Model# BB-WSK-REF-2 includes:
- 1 - Wzzard wireless node - temperature & humidity (BB-WCD1H2102H)
- 2 - Clamp-on current sensors (BB-JC10F50V)
- 1 - 10K thermistor for temperature (BB-WCHCBL)
- 1 - Door open/close sensor (BB-WCHMS)
- 1 - SmartSwarm 342 Gateway
Stack Light Monitoring
Model# BB-WSK-SLM-2 includes:
- 1 - Wzzard wireless node - light (BB-WCD1H3001HP100)
- 1 - Stack Light Sensor Cable (BB-LSSCBL)
- 1 - SmartSwarm 342 Gateway
Dimensions
The Wzzard nodes have dimensions of 120.38 mm (4.74 in) length, 27.42 mm (1.08 in) height, and 19.05 mm (0.75 in) depth.
Specifications
Technology
- Wireless: 802.15.4e, SmartMesh IP
- LED: Network Connectivity, Node Status
Power
- Internal: 3.6V 1650 mAH Lithium Thionyl Chloride 2/3 AA battery
- Battery Life: 5-year battery life, based on 1 minute sensor sampling interval
Mechanical
- Physical Connection: Molex® 6-pin MicroClasp™
- Antenna: Internal
- Mounting Options: Mounting bracket (included), VHB adhesive strip (included), or zip tie
- Dimensions: 120.38 mm x 27.42 mm x 19.05 mm (4.74 in x 1.08 in x 0.75 in)
- Weight: 0.09 kg (0.2 lb)
Wireless Security
- Device Authentication: 128-bit AES-based encryption with multiple keys
- Message Integrity Check (MIC)
- Synchronized Key Changeovers
- Customized Key Rotation
Thionyl Chloride Lithium Battery* (1 supplied with product)
- Temperature Range: -60 to +85 °C
- Nominal Capacity: 1.65 Ah
- Nominal Voltage: 3.6 V
- Diameter: 14.5 mm
- Height: 33.5 mm
- *Potential Hazard: Do not recharge, crush, disassemble or heat above +100°C (+212°F)
Environmental
- Installation: Indoor
- Operating Temperature: -20 to +70 °C (-4 to +158 °F)
- Storage Temperature: -40 to +85 °C (-40 to +187 °F)
- Operating Humidity: 0 to 95%, non-condensing
Regulatory - Approvals / Standards / Directives
- FCC Part 15, 15.247, Class B
- Industry Canada - RSS210
- 2014/35/EU Low Voltage Directive
- 2014/53/EU Radio Equipment Directive
- CE - Directives: 2011/65/EU amended by (EU) 2015/863 - Reduction of Hazardous Substances Directive (RoHS); 2012/19/EU Waste Electrical and Electronic Equipment (WEEE)
- EMC: ETSI EN 300 328 v2.1.1, ETSI EN 301 489-1 V2.1.1, ETSI EN 301 489-17 V3.2.0, EN 55032 +AC, Class A, EN 55024
- CE - Standards: EN/IEC 61010-1 3rd Ed., EN/IEC 61010-2-201 1st Ed.
- RF Exposure: EN 62479
- Safety: EN 61000-6-2, EN 61000-6-4 + A1
- Vibration: EN 60255-21-1
- Shock: EN 60255-21-2
- Drop: IEC 60068-2-31
BB-WCD1H2102H – Sensor Interface Specifications
Analog Inputs
- Input Range: 0-10V DC/0-20 mA (software selectable)
- Resolution: 0.3 mV/1.3 uA
- Input Load Resistance: 59 K Ohms/250 Ohms
- Accuracy: +/-25 mV +/-0.05 mA
- Number of Analog Inputs: 2
Thermistor Input
- Types Supported: 10K @ +25 °C
- Ranges Supported: -40 to +85 °C
- Resolution: 0.05 °C
- Accuracy: Typical ± 0.3 °C @ +25 °C
- Number of Thermistor Inputs: 1
Digital Inputs
- Voltage Range: 0 - 48V DC
- VIL: 0.4 V, maximum
- VIH: 2.5 V, minimum
- Pull-up Current: 65 μA
- Type: Sinking (NPN) Input
- Isolation: None
- Number of Digital Inputs: 1
Integrated Sensors - inside of node
- Humidity Sensor Accuracy: 4%, relative humidity
- Response Time: 80% response within 10 minutes
- Number of Humidity Sensors: 1
- Temperature Sensor Offset Error @ +25 °C: ± 0.25 °C
- Slope Error: ± 0.033 °C/°C
BB-WCD1H3001HP100 – Sensor Interface Specifications
Analog Inputs
- Input Range: 0-10 VDC
- Resolution: 0.3 mV
- Input Load Resistance: 59 K Ohms
- Accuracy: +/-25 mV
- Number of Inputs: 3
Sensor Power
- Power to Sensor: Switched vBat Out
Integrated Sensors - inside of node
- Humidity Sensor Accuracy: 4% RH
- Response Time: 80% response within 10 minutes
SmartMesh IP 802.15.4e Radio Specifications
| Parameter | Conditions | Minimum | Typical | Maximum | Units |
|---|---|---|---|---|---|
| Frequency Band | 2.400 | 2.4835 | GHz | ||
| Number of Channels | 15 | ||||
| Channel Separation | 5 | MHz | |||
| Channel Clear Frequency | Where k = 11 to 25, as defined by IEEE 802.4.15 | 2405 + 5*(k-11) | MHz | ||
| Modulation | IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) | ||||
| Raw Data Rate | 250 | kbps | |||
| Range | Indoor | 100 | m | ||
| Outdoor | 200 | m | |||
| Receiver Sensitivity | Packet Data Error Rate (PER) = 1% | -93 | dBm | ||
| Receiver Sensitivity | PER = 50% | -95 | dBm | ||
| Conducted Output Power (PA on) | Delivered to a 50 Ω load | 8 | dBm | ||
| Conducted Output Power (PA off) | Delivered to a 50 Ω load | 0 | dBm | ||
| Radiated Output Power (PA on) | Taoglas PA.11.BB antenna | 7 | dBm | ||
| Radiated Output Power (PA off) | Taoglas PA.11.BB antenna | -1 | dBm |
