Braun Air Styler AS2.26

Key Features

• Power: 800W
• IONTEC Technology for soft, shiny, frizz-free hair
• 3 Style Settings: Cool Air (*), Moderate Heat (I), Intense Heat (II)
• Interchangeable Attachments: Concentrator, Large Oval Thermal Brush
• Cord Length: 195 cm

How to Use

Mount the desired attachment onto the handle.

To start the styler, select the appropriate temperature setting for your hair type:

• * for Cool Air function
• I for Moderate Heat
• II for Intense Heat

Use moderate heat for fine, sensitive, colored, or bleached hair. Use high heat for thicker hair.

After use, turn the unit off by setting the switch to '0' and unplug the power cord. Allow the unit to cool before storing.

Changing Attachments

To remove an attachment: Press and hold the release button downwards (refer to Fig. 1), then gently turn the attachment to the right until the markings align. The attachment can then be removed.

To attach a new accessory: Position it on the handle (refer to Fig. 2) and turn gently to the left until it clicks into place.

Styling with Attachments

Concentrator

Use the concentrator nozzle to remove excess dampness and prepare hair for styling by directing the airflow around the head.

Large Oval Brush for Volume & Form

Place the brush under a lock of hair close to the scalp. Hold for a few seconds to add volume at the roots while holding the ends with your other hand. While drying, use the brush to lift hair at the roots. Then, hold the end of the brush with your other hand and slowly slide it along the hair length. At the ends, either turn the unit slightly towards the face to shape hair inwards or roll the hair 360° on the brush while sliding it to the tips.

For a long-lasting set, use the cool setting '*' on warm hair while holding the brush head at the roots. Repeat for each lock of hair.

Cleaning & Maintenance

General Information

Ensure the unit is switched off, unplugged, and cooled down. Clean the exterior with a damp cloth. Make sure no water seeps into the unit and that it is completely dry before use. Do not wrap the cord tightly around the unit; coil it loosely. Do not pull the power cord while using the unit. Always unplug the unit after use.

Cleaning the Rear Filter

Ensure the unit is switched off, unplugged, and cooled down. To maintain efficiency, clean the rear grille regularly with the provided brush. To remove the filter, firmly hold the handle, gently turn the filter downwards (refer to Fig. 3), and pull it out. Replace the filter after cleaning before using the unit again (refer to Fig. 4).

Warranty

The product comes with a 2-year warranty. For more information, please contact the after-sales service.