Hot Wheels Ultimate Gator Carwash: Instructions
This document provides instructions for assembling and playing with the Hot Wheels Ultimate Gator Carwash playset.
Get Ready to Play
- Fill the water tower with warm water (86°F-104°F/33°C-40°C). Then close the lid. Ensure the valve is closed before adding water.
- Fill the whirlpool tank with icy water (under 50°F/10°C).
Reset After Play:
- Overfilling the reservoir may cause leakage.
- To avoid burns, do not use water that is too hot, above 120°F/48°C.
- For best performance of the color change feature, use icy water under 50°F/10°C.
- Water toys can sometimes get messy; protect play surfaces before use.
- Parents should assist with filling the tanks with water.
- Be sure to only use Color Shifter cars.
- Color change will last longer if the toy is not exposed to intense heat or direct sunlight for prolonged periods.
Featuring: Two-Color Change! Color changes may vary. Icy Water Under 50°F/10°C, Warm Water Around 86°F/33°C.
To Play 1
- Drive up to the conveyor belt.
- Turn the crank to lift your car.
- Drive into the pool & turn the knob to fill it with water. Your car changes color! Keep the valve closed before adding water.
- Release your car onto the track!
- Spin rollers to dry your car & keep moving!
- Turn the scrub brushes & dive into the whirlpool tank!
- Pump to spin your car up to escape from the color-changing whirlpool!
- Watch out! You may get chomped by the gator... or if you're lucky, drive through safely!
To Play 2
- Move lane changers.
- Jump off the ramp & take another spin through the car wash!
Storage
- Detach tanks & remove trays.
- Drain all water out before storage.
Performance Tips
- To get the car out of the whirlpool tank, pump fast and completely a few times.
- For best results, fill the cold water whirlpool tank with crushed ice or small cubes.
- Change warm water out frequently to maintain optimal color shifting.
- Make sure the water valve is closed before filling with water.
- Drain, rinse, clean and dry all items thoroughly before storing. Do not immerse set in water.
More Ways to Play
Connect to Hot Wheels® tracks & sets to build your own Hot Wheels™ City!
Note: Not for use with some Hot Wheels® vehicles. One vehicle included. Additional vehicles sold separately. Other Hot Wheels® tracks and sets sold separately.
Assembly Instructions
Refer to LETTERS on toy parts and the CONTENTS section to help with assembly.
Zone 1 - Bag 1
Follow steps 1-6 for one-time assembly of Zone 1 components.
Zone 2 - Bag 2
Follow steps 7A, 7B, 8A, 8B, and 8C for assembly of Zone 2 components.
Zone 3 - Bag 3
Follow steps 9, 10, and 11 for assembly of Zone 3 components.
