SereneLife SLPAC105W Portable Air Conditioner User Manual

Product Overview

This document is the user manual for the SereneLife SLPAC105W Portable Air Conditioner, a compact home A/C cooling unit with built-in dehumidifier and fan modes. It includes a window mount kit and has a cooling capacity of 10,000 BTU.

Brand: SereneLife

Model: SLPAC105W

Product Type: Portable Air Conditioner

User Tips and Safety Warnings

Read all instructions carefully before setting up and operating the unit. Keep this manual for future reference. Failure to follow instructions may cause damage, impair operation, or void the warranty.

User Tips

• ⚠️ Please avoid operations that pose safety and health risks.
• ⚠️ Follow instructions for safety and health concerns.

Precautions

• ✅ For household use only.
• ✅ For indoor use only; place the A/C in a dry environment.
• ✅ In case of blocked air exchange, do not stack items around the machine.
• ✅ To avoid damages, do not place heavy items on the machine.
• ✅ Do not operate the machine with wet hands or in a humid environment.
• ✅ Wipe the machine with a soft cloth, not wax, diluent, or irritant detergent.
• ✅ Clean the filter once every two weeks.
• ⚠️ Never drink condensed water discharged from the machine.
• ⚠️ Please unplug the power cord if the machine will not be used for a long time.
• ⚠️ Non-professionals are not allowed to dismantle or repair the machine.

Safety Warnings

• ⚠️ Damaged power cord or plug shall not be used. Never plug into a loose socket.
• ⚠️ Never damage the power cord, or use unlicensed power cord. Ensure voltage is correct.
• ⚠️ Do not modify or extend the power cord.
• ✅ A grounded outlet is suggested for the machine.
• ⚠️ In case of electric shock, never plug/unplug with wet hands.
• ⚠️ To unplug, pull the plug end instead of wires.
• ⚠️ Never control on/off status by directly plugging/unplugging.
• ✅ Please turn off the machine before unplugging.
• ⚠️ Never overload the socket.
• ✅ Keep away from heat sources or direct sunlight exposure.
• ⚠️ If there is any unusual noise, smell, or smoke, turn off and unplug for diagnosis.
• ⚠️ In case of electric shock, never damage the power cord by placing heavy objects on it.
• ⚠️ Never insert fingers or any hard objects into the louver.
• ✅ Keep electrical parts away from water.
• ⚠️ If water enters, turn off and unplug in time; call for professional check and repair.
• ✅ Please turn off and unplug before wiping, cleaning, or replacing components.
• ⚠️ If gas leakage happens, open the window for ventilation before plugging the machine.
• ✅ The appliance can be used by children of 8 years old and above, and persons with reduced physical, sensory, or psychological capabilities, if they have been given supervision and instruction concerning proper use and hazards.

Tips

• ✅ For proper compressor work, place the machine vertically on an even ground.
• ✅ For proper ventilation, keep the machine at least 50cm from nearby objects.
• ⚠️ Never use the appliance near gasoline or other flammable objects.
• ⚠️ Keep the appliance from spraying agents or solvents, as plastics may deform and electrical parts may be damaged.

Product Overview

Main Components

The portable air conditioner consists of the following main components:

• 1. Handle
• 2. Air Inlet Grille (Up)
• 3. Control Panel
• 4. Casters
• 5. Louver
• 6. Air Outlet Grille
• 7. Drainage Hole
• 8. Air Inlet Grille (Down)
• 9. Air Exhaust Duct Assembly
• 10. Window Sealing Kit

Diagram Description: The diagram shows the main unit with numbered components. The air exhaust duct assembly and window sealing kit are shown separately.

Control Panel and Remote Control

The unit features a control panel on top and comes with a remote control for convenient operation.

Control Panel Functions:

• Power Button: Press to turn the unit ON/OFF.
• Fan Speed Button: Press to choose high/low speed.
• UP/Down Button for Temperature and Timer: Under cooling mode, adjust temperature. In timer mode, set ON/OFF time. Pressing both together switches between °C and °F.
• Mode Button: Press to choose cooling, fan, or dry mode.
• Timer Button: Press in standby mode to set ON time; press in ON mode to set OFF time.
• Temperature and Timer Display: Shows current temperature and timer settings.
• Temperature Switch Button: Switches between °C and °F.
• Sleep Button: Selects sleep mode.

Diagram Description: The control panel on the unit and the remote control are illustrated, showing button layouts and indicators like Cool, Fan, Dry, Sleep, High, Low, Time, Full, and WiFi.

Operation

Place & Install

Placement:

• Place the machine on a horizontal floor near the window.
• For proper ventilation and best performance, keep the appliance at least 50cm from objects nearby.

Diagram Description: Illustrates the recommended placement of the unit near a window, with 50cm clearance from walls and objects, and a vertical height of 90cm for the exhaust.

Air Exhaust Duct Assembly

The assembly includes a connector, air exhaust duct, and flat nozzle. A clip-fixture type is used for securing the plate.

Diagram Description: Shows the flexible exhaust duct, its connector, and flat nozzle. Also depicts the clip-fixture type with plates and a clip.

Installation Steps:

Step 1: Clip-fixture Type

1. Measure window size.
2. Adjust the length of the plate according to window size.
3. Lock the plate.

Diagram Description: Shows two window panels and how to measure and adjust the sealing plate.

Step 2: Fix the plate to window

Diagram Description: Illustrates attaching the prepared plate to the window frame, showing sliding action for vertical and horizontal windows.

Step 3: Connect Exhaust Pipe

Swirl the exhaust pipe assembly (exhaust fitting end) into the rear panel outlet counterclockwise.

Diagram Description: Shows the exhaust duct being attached to the back of the air conditioner unit.

Step 4: Secure to Window Seal Panel

Insert the exhaust pipe assembly (exhaust port end) into the window seal panel assembly and screw it up.

Diagram Description: Shows the exhaust hose inserted into the window sealing kit and secured with screws. An "Impression Drawing of Completion" shows the unit installed with the hose venting through the window.

Incorrect Installation

• It's important to keep the exhaust duct smooth. Incorrect installation will affect the A/C's work.
• Prevent the exhaust duct from sharp bending.
• Ensure air can flow smoothly in the duct.

Warning: The exhaust duct is designed for this model. Do not replace or lengthen it; otherwise, it will result in failure.

Notice: The air exhaust duct can stretch up to 1500mm. To avoid bending, stretch it as short as possible.

Remote Control Battery Installation

Please install the battery correctly before using the remote control.

1. Slide to open the battery cover on the back.
2. Insert 2 x AAA (DC1.5V) new batteries and install electrodes correctly.
3. Fit the batteries in place.

Diagram Description: Shows the back of the remote control being opened, batteries being inserted, and the cover being closed.

Warning:

• Only AAA DC 1.5V batteries are allowed; never use rechargeable batteries or other types.
• Replace both batteries; never mix new with old batteries.
• Please remove batteries if the appliance is not to be used for a long time.

Warning:

• Never use leaked batteries.
• Chemicals in batteries can cause health hazards like burns. If battery liquid splashes on skin or clothes, wash with clean water. If swallowed, rinse mouth with clean water and seek medical attention.

How to Operate

Cooling Mode

• Cooling indicator will light on.
• Temperature Setting: 60°F to 86°F (16°C to 30°C).
• Press Fan Speed Button to choose low/high fan speed.

Fan Mode

• Fan indicator will be on.
• Press Fan Speed Button to choose low/high fan speed.
• Temperature cannot be set in this mode.

Dry Mode

• Dry indicator will be on.
• Remove water plug, insert one end of pipe to drainage hose; the other end goes into a water tank or water channel.
• Compressor starts if ambient Temp. ≥17°C (62°F) and stops if Temp. ≤15°C (59°F). A 3-minute delay protects the compressor.
• Fan runs at a fixed low speed.
• Temperature is fixed.

Notes: Under dry mode, dismantle the air exhaust duct; otherwise, performance will be affected and a "FL" water full alarm will buzz.

Heating Mode (Not available for cooling only models)

• Heating indicator will light up.
• Press UP/DOWN button to select Temp. between 16°C to 30°C (60°F to 86°F).
• Press Fan Speed button to set low/high speed.

Diagram Description: Shows a bucket collecting water from the drainage hose.

Timer Mode

• In standby mode, press Timer button to set ON time (0-24 Hours) using UP/DOWN buttons. Timer indicator lights up.
• In running state, press Timer button to set OFF time (0-24 Hours) using UP/DOWN buttons. Timer indicator lights up.

Clean and Maintenance

Drainage

The appliance uses a self-evaporating system to reuse condensed water for cooling. The appliance displays "FL" with a buzz sound when the built-in water container is full. After the compressor stops, drain water as follows:

1. Unplug and dismantle the air exhaust duct.
2. Move the appliance to a suitable place.
3. Pull out the water plug and drain all water.
4. Re-insert the water plug.
5. Re-install the air exhaust duct and restart the appliance.

Diagram Description: Shows the unit with the drainage hole and hose connected to a container.

MAINTENANCE

Warning: In case of electric shock, turn off and unplug before repair or maintenance.

Body Clean

1. Unplug before cleaning.
2. Clean with a soft and half-wet cloth.
3. In case of damage to appearance or the appliance, never use chemical reagents like benzene, alcohol, or gasoline.
4. Never let water splash into the appliance.

Diagram Description: Shows a person cleaning the unit with a cloth, and a close-up of a warning about chemical reagents.

Filter Cleaning

The filter should be cleaned every two weeks. If indoor air quality is poor, clean more often to maintain performance.

1. Take off the air-inlet grille and pull out the filters.
2. Clean the filter in 40°C (104°F) warm water or water with neutral detergent.
3. Dry the filter in a cooling area.
4. Re-install the filter and grille after drying, then restart the appliance.

Diagram Description: Shows filters being removed, cleaned with water and detergent, and cleaned with a vacuum cleaner if not very dirty.

Warning: Do not wash the filter with water above 40°C (104°F) or irritating detergent. Keep filters away from heat sources and dry naturally. Never operate the appliance without the filter installed.

Seasonal Maintenance

If the appliance will not be used for a long time, follow these steps:

1. Pull out the water plug for drainage.
2. Run in Fan mode for at least 2 hours to dry internal parts.
3. Turn off and unplug.
4. Clean the filter and reinstall.
5. Dismantle the air exhaust duct and store it properly.
6. Take off batteries from the remote.
7. Wrap the appliance in a plastic bag and keep it in a dry, cool place.

When using the appliance again after a long period:

1. Ensure the water plug and filter are installed.
2. Never use a damaged power cord; check before use.
3. Insert batteries into the remote.
4. Assemble other parts according to the instructions.

Diagram Description: Shows the portable air conditioner unit.

Common Failures and Diagnosis

Intelligent Error Detection

Troubleshooting

The following table lists common faults and maintenance methods. If issues persist, contact professional maintenance personnel.

Features

• Metal Control Box to Prevent from Fire and Exploding
• Rotary Compressor
• Universal Castors for Moving Freely
• Wifi function ?
• Lightweight & Portable A/C Unit
• Compact Freestanding Room Air Conditioner
• (3) Operation Modes: AC Cooling/Dehumidifier/Fan
• Hassle-Free, Quick Setup Cooling
• Simple Electric Plug-in Operation
• Convenient Wide-Area Climate Control Room AC Coverage
• Push Button Control Panel with LED Display
• Time, Temperature & Fan Speed Adjustment Settings
• Includes Universal Window Mount AC Exhaust Kit
• Removable & Washable Air Filter Screen
• Modern Style, Sleek Body Housing
• Energy Efficient: Low Power Consumption
• Low Noise Level Motor
• Rolling Wheels for Easy Portability
• Used for Home, Office, School & Business Rooms

What's in the Box:

• AC Unit
• Exhaust Hose
• Window Installation Plate
• Remote Control

Technical Specs

• Power Supply: 115V/60Hz
• Rated Power: 920W
• Refrigerant Type: R410a
• Cooling capacity (ASHRAE): 10,000 Btu/h
• Cooling capacity (DOE): 5,500 Btu/h
• Coverage Area: Cools Rooms up to 300 Square Feet
• Air Flow: 360 Cubic Meters / Hour
• Operating Modes: Cool / Fan / Dry (Dehumidifier)
• Moisture Removal / Dehumidifier: 1.2 Liters / Hour
• Operating Noise Level: 57 dBA
• Fan Speed Settings: Two Level, Low/High
• Temperature Unit Selectable: °C/°F (Celsius/Fahrenheit)
• Adjustable Timer Settings: Up to 24 Hours
• Construction Material: High Impact Polystyrene (HIPS)
• Battery Operated Remote Control, Requires (2) x 'AAA' Batteries, Included
• Power Cable Length: 5.6' ft.
• Product Dimension (L x W x H): 27.6" x 12.8" x 11.6" -inches

⚠️ WARNING: This product can expose you to a chemical or group of chemicals, which may include "Acrylonitrile", known in the state of California to cause cancer, birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov/.