Introduction
Welcome to the Cardell® 9500HD portable multi-parameter veterinary monitor. This device is designed for continuous monitoring, display, and recording of vital physiological parameters in veterinary centers. It is intended for use by qualified veterinary personnel.
This operator's manual provides detailed information on the performance specifications, operation, and maintenance of the 9500HD. It is essential to read and understand this manual thoroughly before operating the monitor to ensure safe and correct usage.
Product Support and Information
For product support or service, contact Midmark in Tampa, Florida, at 800-643-6275 or visit their website at www.Midmark.com.
The manufacturer's quality management system complies with international standards ISO 9001 and EN 46001.
Safety Guidelines
This manual emphasizes safety throughout its content. Key safety information includes:
- Read and understand all warnings and cautions before operation.
- The monitor is not intended for use as an apnea monitor or during MRI/CT scans.
- Regularly check alarm functions and ensure proper setup.
- Inspect all cables and connectors for damage before use.
- Use only manufacturer-recommended accessories.
- Ensure proper grounding and electrical safety.
- Dispose of the device and accessories according to local laws and regulations at the end of their lifecycle.
Key Features
The Cardell® 9500HD monitors the following physiological parameters:
- ECG waveforms
- Arterial blood oxygen saturation (SpO2)
- Pulse rate
- Respiration rate
- Non-invasive blood pressure (SYS, DIA, MAP)
- Temperature
- Optional: End-tidal CO2 (EtCO2) and inspired CO2 (iCO2) with Capnostat® Sensor.
Getting Started
Before monitoring, ensure the following:
- Check for any mechanical damage.
- Verify all external connections are secure.
- Confirm the patient monitor is in good working condition.
- Turn on the monitor and allow it to complete its self-test.
- Connect the monitor to the patient using appropriate accessories.
Refer to the manual for detailed operating procedures and setup instructions.
