Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail: US: cs.us@costway.com | UK: cs.uk@costway.com
Follow Costway
Visit us: www.costway.com
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
IMPORTANT INSTRUCTIONS
When using heater, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater;
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear;
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended;
- Always unplug heater when not in use;
- If the power supply is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard;
- Do not use outdoors;
- This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container;
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over;
- To disconnect heater, turn controls to off, then remove plug from outlet;
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater;
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked;
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored;
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons;
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip);
- SAVE THESE INSTRUCTIONS.
PLEASE READ AND SAVE THESE INSTRUCTIONS.
Product Characteristics
Thank you for choosing our heater. Please read this instruction carefully before using and keep it for future reference.
- Our heater operates as follows: tubular element is taken as heat source, efficient and permanent heat conduction oil is taken as the medium, heat eliminates via radiation fin, and room temperature is increased via air circulation.
- Our heater has the following advantages: convenient, safe, beautiful, tranquil operation, without electromagnetic disturbance etc. It is suitable for such locations as scientific research room, hospital, hotel, training practice facility, and bedroom, etc. The heater keeps your room or office more comfortable in cold seasons!
Product Structure Diagram
The heater consists of the following main components:
- Control Panel
- Temperature Knob
- Power Setting Knob
- Cord Wrap
- Wheel
The product is an oil-filled radiator heater with multiple vertical fins designed for heating.
Operation Instruction
Mounting
Take out the heater and all the parts from the packing carton.
- The heater should be unplugged during assembly or disassembly.
- For ease of assembly, turn the unit upside down.
- Place the footplate on the top of both radiation fins. Refer to the product structure diagram for wheel location between the first and last set of fins.
- Fix the footplate on the heater with the specified U-type bolt and wing nut, then tighten the screw.
- After assembly is complete, turn the unit upright for operation.
Note: Do not operate without wheels attached.
Operating
- Ensure the temperature knob and power setting knob are at the MIN position before using, and plug the power cord into a wall outlet (120VAC, 60Hz).
- When the unit is turned on, the power indicator light will illuminate to indicate the heater is functioning.
- The temperature knob can regulate room temperature. Turn the temperature knob clockwise to increase the temperature; turn it anti-clockwise to reduce the temperature until the desired temperature is reached, indicated by the "ON" light.
- This heater has three (3) power settings for your comfort: rotating to the "1" setting will provide 600 watts of heat, rotating to the "2" setting will provide 900 watts of heat, and rotating to the "3" setting will provide 1500 watts of heat.
Season Care
During Season Care
Note: When you don't use the heater, please rotate the power setting knob to 0 position, turn the temperature knob to the minimum position, and unplug the heater.
Do not move the heater unless the oil has cooled. Move the heater with the handle. Never place the heater directly under a socket.
During season care:
- Before cleaning, be sure to turn off and unplug the heater.
- Carefully wipe the unit with a soft damp cloth. Please be very cautious near the motor and heating elements.
- Do not immerse the heater in water.
- Never use gasoline, benzene, or thinner. This will damage the surface of the heater.
After cleaning, be sure to completely dry the unit with a cloth or towel.
Note: Do not use waxes or brush polish, since these will react with the heater, resulting in discoloration.
After Season Care
- Store heater in a cool and dry location with the power cord properly secured.
- Please store the unit in its original carton or a suitable container.
Note: Do not attempt to repair or adjust any electrical or mechanical functions in this unit; do not remove knob parts from the heater.
Technical Parameters
| Model # | Number of fins | Rated voltage (V) | Frequency (Hz) | Rated power input (W) | Power setting I (W) | Power setting II (W) | Total power input setting III (W) |
|---|---|---|---|---|---|---|---|
| HD907-7 | 7 | 120 | 60 | 1500 | 600 | 900 | 1500 |
NO TROUBLESHOOTING INFORMATION
NO STORAGE INFORMATION
Customer Feedback
Welcome to visit our website and purchase our quality products!
Your suggestions and comments for COSTWAY are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below:
Great products so far
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.
