DENVER SCK-5400 Electric Kids Scooter

Important Safety Information

Before operating this electric kids scooter, parents/adult supervisors must read all instructions for safe assembly, operations, and maintenance. This user's manual guides you through the functions and usage. Familiarize yourself with operation to keep the scooter in the best condition. The instruction manual must be retained as it contains important information.

⚠️ Warning: This toy contains batteries that are non-replaceable.

⚠️ Warning: This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they are given supervision or instruction concerning safe use and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Chapter 1: General Information

Owners are urged to charge and store this electric kids scooter model in a safe place. To increase the safety and lifespan of the batteries, it is important not to charge this model if the temperature is below 5°C or above 45°C. Disconnect the charger when the battery is fully charged. Use only the supplied charger XHK-922-25210. The battery charger used with the electric toy shall be regularly examined for damage to the supply cord, plug, enclosure, or other parts. If damage occurs, it shall not be used until repaired.

⚠️ WARNING: To avoid serious injury:

PARENTAL AND ADULT RESPONSIBILITY AND SUPERVISION ARE NECESSARY.

Riding this electric kids scooter can be hazardous. Parents and supervising adults must select riding products appropriate for their child's age to avoid children being too immature or inexperienced to endanger themselves.

Parents/supervising adults must assemble the product and ensure it is working well before allowing children to use it.

Parents/supervising adults must teach children how to safely ride this electric scooter and always pay attention to where the children are going.

Cleaning and maintenance shall only be performed by parents or supervising adults.

Ensure the charging port is covered with the rubber protection cap to avoid electrical problems.

Always disconnect the product from the charger before wiping it down or cleaning it with a damp cloth.

Clean the scooter with a damp cloth only. Do not use running water or a pressured water-gun. Do not clean with alcohol, gas, kerosene, or other corrosive and volatile chemical solvents.

Do not immerse the product in water.

Store the product in a dry and cool place when not in use. Defects caused by storing or using the electric kids scooter in wet/humid places are not covered by the warranty.

Do not leave the device exposed to sunlight in a car.

1.1 The Risk of Driving

⚠️ WARNING:

• This toy is unsuitable for children under 6 years due to its maximum speed.
• Protective equipment should be worn. Not to be used in traffic.
• Maximum load: 50 kg.
• Learn how to drive safely before riding at higher speeds.
• Do not make dangerous moves or ride one-handed while the scooter is running.
• Keep your feet on the foot pedal.
• Falling, losing control, crashing, or violating manual rules can lead to injury.
• Speed and range may differ based on rider's weight, terrain, temperature, and driving style.
• Wear a helmet, protective clothing, kneepads, and elbow pads to avoid serious injury.
• Do not wear loose clothing or open laces that can be caught in the wheels.
• Read the manual carefully before using the electric kids scooter.
• Only for use in dry weather. Do not ride in rain, snow, or moist areas.
• When encountering rough or uneven road conditions, slow down or get off the scooter.
• Do not try to pass steps exceeding 3 cm, as this may cause the scooter to subvert, leading to rider injury or scooter damage.
• This electric kids scooter is for domestic use only. Direct parental/adult supervision is required at all times. Use only in controlled environments free of traffic hazards and not on public streets.
• Do not use this product if the temperature is below -5°C.
• Do not use it on a sloping section over 5 degrees. For uphill use over 5 degrees, assist with your foot.

Please note: The manufacturer accepts no liability for improper use of this product.

1.2 Preparation before Operation

Before using, the battery should be fully charged. Please check Chapter 2.3.

1.3 The Weight Limitation of the Operator

The reason for the weight limitation:

1. To guarantee the safety of the operator.
2. To avoid overloading, which can make the motor defective.

Maximum load: 50kg.

Defective motor caused by overloading will not be covered by the warranty.

Chapter 2: Operating the Electric Kids Scooter

2.1 (A) Product Installation Instructions

Follow these steps to assemble the scooter:

1. Tighten the handle in the direction of the arrow.
   [Diagram: Handle being tightened]
2. Connect the vertical pipe to the bottom plate and align it with the screw.
   [Diagram: Vertical pipe connecting to base plate with screw alignment]
3. Lock the screw with a screwdriver.
   [Diagram: Screw being tightened with a screwdriver]
4. Tighten the cap in the direction of the arrow.
   [Diagram: Cap being tightened]

(B) Product Expansion Demonstration

To adjust the handlebar height:

1. Untwist the handle in the direction of the arrow.
   [Diagram: Handle being untwisted]
2. Press the metal lock on the handle, then hold it while you pull up, or push down until the handle reaches the preferred height.
   [Diagram: Metal lock being pressed and handle height adjusted]
3. Tighten the cap after adjusting the height.
   [Diagram: Cap being tightened after height adjustment]

2.2 Using the Scooter

Start using the electric kids scooter:

1. Hold the handle with both hands and place one foot on the round pedal switch, keeping it there.
   [Image Description: Scooter with a highlighted 'Pedal switch' on the deck]
2. Gently push forward with the other foot. When you reach 3 km/h, the motor will make a BEEP and the engine starts.
3. The electric kids scooter now drives itself and will maintain a speed of 3-8 km/h, depending on the surface.
4. To stop the motor, step off the pedal switch.
5. To slow down, step lightly on the rear mechanical brake.
   [Image Description: Scooter with a highlighted 'Brake' lever on the rear wheel]
6. To stop completely: Use one foot to step on the rear mechanical brake. After hearing the BEEP, continue to step on the brake until the electric kids scooter stops.
7. Low Battery Indicator: If the scooter emits a continuous series of “beeps, beeps, beeps, beeps, beeps”, the battery is low. Please charge the scooter.
8. Over-speeding Indicator: If the scooter emits a continuous series of “beeps, beeps, beeps”, it means over-speeding. Please slow down, otherwise the scooter will be damaged.
9. Automatic Turn Off: The scooter will automatically turn off after 15 seconds of inactivity. To use it again, slide the motor.
10. Lights: After the motor is started, the lights cycle from cyan to seven colors, then turn off. They turn on again when the induction contact is pressed.
11. When the scooter is started, press the switch by foot, and the buzzer will emit a "beep". If it is not started when the switch is pressed, the buzzer will not sound. This indicates that you are driving the scooter correctly.

Maintenance

To ensure the best possible performance and experience from your electric scooter, regular maintenance of important parts is essential.

Battery Maintenance

All batteries have a life cycle, and performance decreases over time. Follow these advice to maximize battery lifespan:

• Charge the battery at regular intervals, even if the electric scooter is not used for a long time. This prevents damage from low voltage over extended periods.
• Avoid draining the battery completely. It is best to charge while there is still power on it. This extends battery life. Constantly depleting the battery can damage it (damaged battery caused by wrong handling is not covered by the warranty).
• Battery time may be lower in cold or very hot areas compared to temperatures between 15-25° Celsius. This is normal behavior, not a battery failure.
• A fully charged battery will lose power if the electric scooter is not used for a period. Expect a fully charged battery to retain power for 90-120 days in off mode before full discharge. Partially charged batteries will discharge sooner.
• Do not expose the battery to temperatures above 50° Celsius or below -10° Celsius for extended periods (e.g., do not leave in a hot car, do not put into fire). Low temperatures (subzero) can damage battery cells.
• Keep the electric scooter away from open flame or other heat sources to prevent the battery from overheating. Also, avoid freezing temperatures, as both excessive heat and cold can cause battery discharge.
• Only use the original charger or an official replacement, as different batteries may require specific chargers. Using other chargers could damage the product.
• Do not overcharge or discharge the battery.
• Charge the battery before it is completely out of power to avoid damaging the battery cells. (Damaged battery caused by wrong handling is not covered by the warranty).
• It is forbidden to disassemble the battery package. This should only be handled by official service repair centers and professionals.

Bearings, Screws, Brakes and Wheels

Your electric scooter is made of moving parts susceptible to wear and tear over time.

Bearings and Screws:

The electric scooter has sealed and dustproof bearings, requiring no lubrication. Check bearings for wear at regular intervals to ensure safe riding. Avoid jumping on and off and do not apply excessive force to prevent bearing damage. This is not a sports electric scooter.

Ensure all screws are properly tightened to avoid unsafe situations. Check screws regularly and tighten if they seem loose.

Brakes:

Check the brake for wear at regular intervals to ensure safe riding. Do not apply excessive force to avoid brake damage.

Wheels:

Check the wheels for wear at regular intervals to ensure safe riding.

Electric scooters come with different wheels, generally separable into tires with inflatable inner tubes and solid wheels.

If a wheel seems wobbly even after screws are tightened, the bearings might be worn and require replacement.

General Warnings

• Please ensure the steering system is correctly adjusted and all connection components are firmly secured and not broken before riding. Refer to handle assembly and safety instructions.
• Please read the operation guide and warnings regarding correct techniques for use and braking.
• Always wear shoes.
• We highly recommend wearing a helmet/pads for your own protection.
• Self-locking nuts and other self-locking fixings may lose their effectiveness.
• All parts and materials of the electric scooter cannot be changed. Modifications are not allowed; if done, the warranty is void.

Storage and Cleaning

If your Electric scooter gets dirty, clean it with a damp cloth only. Do not use a pressured water-gun or running water, as this could damage vital parts. You can also use a little toothpaste if dirt is stuck, then clean with a damp cloth.

Ensure the electric scooter is turned off while cleaning and cover the charging port with the rubber protection cap to avoid problems with the electronics.

Dry the scooter with a towel if it becomes wet.

Please notice: Do not use alcohol, gas, kerosene, or other corrosive and volatile chemical solvents. This can damage both the appearance and the internal structure of the electric scooter.

Store your Electric scooter in a dry and cool environment when not in use. Avoid leaving it outdoors, as it is not made for storing in wet areas. Do not expose it to high temperatures caused by direct sun for a long time.

2.3 Charging the Scooter

This chapter discusses charging methods, battery maintenance, safety issues, and battery specifications. For your safety and others', and to extend battery life and improve performance, follow these operations. If the product is not used for a long period, charge it once a month to protect battery life. The charger should only be operated by an adult; it is not a toy.

Note: If the battery is damaged due to water, collision, or other abnormal usage, it is not covered by the warranty.

Low Battery

If the electric kids scooter emits a continuous series of “beeps”, the battery is low. Please stop riding and charge immediately to avoid damage to the battery or affect your use.

Charging the Battery

1. Only use the supplied and dedicated charger (XHK-922-25210).
2. Open the charging rubber cover on the pedal and insert the charger output connector into the charging hole.
   [Image Description: Scooter with a highlighted 'Charge port' on the deck]
3. Plug the charger input power into the power socket.
4. The charger indicator is red, indicating charging. When the indicator turns green, the battery is fully charged.
5. When charging is finished, unplug the battery charger from the mains power supply and from the electric kids scooter, and close the charging rubber cover again.
6. The electric kids scooter is ready for use.

⚠️ WARNING:

• Do not charge the battery or use the product if it is giving out some odor or excessive heat, or if there is leakage of any substance.

⚠️ WARNING:

• Do not ride the electric kids scooter while charging!
• It is prohibited to disassemble the battery.
• Do not touch any substance leaking out of the battery.
• Do not let children and animals touch the battery.
• Batteries contain dangerous substances inside. It is forbidden to open the battery and stick objects into the battery.
• Use only the supplied charger (XHK-922-25210 25.2V 1A).
• Do not overcharge or discharge the battery.

⚠️ WARNING:

Lithium battery inside!

Regarding Battery Charging

Important – Please read!

We hope you get a lot of joy out of your new kids scooter. The battery in these scooters is not fully charged from the production line to avoid slow charging or damage. When left unused, the battery will slowly discharge.

Troubleshooting Charging Issues

If you cannot turn on your kids scooter, and it doesn't seem to charge (the charger light turns green instantly), please do the following:

1. Leave the charger connected for 4-5 hours. This will ensure the battery is fully charged again (it can take 3-4 hours before it starts normal charging).
2. If this does not solve your problem, please ride the kids scooter manually without turning it on. Use your legs to gain speed for about 100 m, then stop and connect the charger. The engine in the rear wheel will help activate the charging function and it will charge normally. (Full charge takes 2-2.5 hours using this method).

Please visit: www.denver-electronics.com to obtain the electronic version of the manual.

Parameters

Low battery protection: Will sound "beep, beep, beep" when power is 15%.

Notices and Compliance

Please notice: All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

DENVER

www.denver-electronics.com

CE Mark

Regarding disposal:

Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if waste material is not handled correctly. Electric and electronic equipment and batteries are marked with the crossed-out trash can symbol (?️). This signifies that they should not be disposed of with other household waste but should be disposed of separately.

As the end user, it is important to submit your used batteries to the appropriate and designated facility. This ensures batteries are recycled in accordance with legislature and do not harm the environment. Many cities have collection points for electric and electronic equipment and batteries, available free of charge at recycling stations or collected from households. Additional information is available from your city's technical department.

DENVER ELECTRONICS A/S

Omega 5A, Soeften, DK-8382 Hinnerup, Denmark

www.facebook.com/denverelectronics

Additional Warnings

Please read the manual completely and the instructions below before using the product.

Product names: DENVER SCK-5400

Product type: Electric Kids kick scooter Year of manufacturing: 2021

Note: ONLY use the supplied charger labeled XHK-922-25210 with the following output voltage to charge this balance scooter: 21.6V - 1A.

• Using another charger may damage the product or create other potential risks.
• Never charge the product without supervision.
• The charging period of the product should not exceed three hours. Stop charging after three hours.
• The product should only be charged in temperatures between 0℃ and 45℃.
• If charging at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a potential risk of damage to the product and personal injury.
• The product should only be used in temperatures between -10℃ and +45℃.
• If used at lower or higher temperatures, there is a risk that the performance of the battery will be reduced and a potential risk of damage to the product and personal injury.
• Store the product at temperatures between 0℃ and 35℃ (optimum storage temperature is 25℃).
• Charge and store the product in an open, dry area and away from flammable materials (i.e., materials that may burst into flames).
• Do not charge in sunlight or near open fire.
• Do not charge the product immediately after use. Let the product cool down for one hour before charging.
• If the product is left with others (e.g., during a holiday period), it should be partially charged (20-50% charged), not fully charged.
• When shipped from the factory, the product has often been partially charged. Keep the product in a partially charged state until it is going to be used.

DENVER ELECTRONICS A/S

Omega 5A, Soeften, DK - 8382 Hinnerup, Denmark

www.denver-electronics.com

EC Declaration of Conformity

(Safety of toys Directive)

The undersigned,

Company Name: DENVER ELECTRONICS A/S

Address: Omega 5A, Soeften, 8382 Hinnerup, Denmark

Certifies that the design and manufacturing of this product:

Product Brand Name: DENVER

Product Model No.: SCK-5400BLACK, SCK-5400BLUE, SCK-5400PINK, SCK-5400WHITE

Product Type: Electric Kids kick scooter

Year of Fabrication: 2021

Serial numbers:
14435-02/21/00001 - 14435-02/21/02500
14436-02/21/00001 - 14436-02/21/01500
14437-02/21/00001 - 14437-02/21/01500
14438-02/21/00001 - 14438-02/21/00500

Confirms to the following directives:

Toy directive Standards:

• Safety of toys Directive 2009/48/EC;
• EN 71-1:2014 + A1:2018;
• EN 71-2:2011+A1:2014;
• EN 71-3:2019;
• EN 62115: 2005+A12: 2015

And therefore complies with the essential requirements of the Toy Directive.

The identity and signature of the person empowered to draw up the declaration and compile the technical files on behalf of the manufacturer:

Signature: [Handwritten Signature Placeholder]
Full Name: Alfred Blank
Position: CEO
Company: DENVER ELECTRONICS A/S
Date: 17th March, 2021