Paulmann 946.68 IP67 LED Lighting Fixture

Product Specifications

This Paulmann LED lighting fixture, model number 946.68, is designed for robust outdoor or demanding indoor use with an IP67 rating. It features a length of 268mm and a width of 62mm. The fixture is capable of withstanding loads up to 5000N and can be adjusted to an angle of up to 28°.

For smart home integration, it is compatible with Paulmann's ZigBee Control Box (Art.-Nr. 939.99) and ZigBee Remote Control (Art.-Nr. 180.11, 500.67), which are sold separately.

Installation Guide

Step 1: Mounting Preparation

Prepare the mounting surface by ensuring a suitable cutout. A hole with a minimum diameter of 64mm is required. A template or guide may be used for precise placement.

Step 2: Fixture Installation

Carefully position the fixture into the prepared opening. Ensure proper electrical connections are made according to safety standards.

Step 3: System Limitations

When connecting additional components or extending the system, adhere to the following limits: a maximum cable length of 50 meters and a maximum power handling capacity of 150 Watts.

Step 4: Recessing the Fixture

The fixture is designed to be recessed into ceilings or walls, with dimensions of 268mm in length and 62mm in width for the recess.

Step 5: Final Connections and Ratings

The fixture provides IP44 protection for certain connections and IP67 protection for the main unit, ensuring resistance to dust and water. Connect the driver and control box as shown in the diagrams. The fixture can be angled up to 28°.

Component Replaceability

This product contains a light source with an energy efficiency class indicated on the packaging.

• The light source or operating device can be replaced by end-users without permanent damage to the luminaire.
• Alternatively, a qualified electrician can replace the light source or operating device without permanent damage.
• If the light source or operating device is not replaceable, the entire luminaire must be replaced.