Lutron MAESTRO Controls: High-Tech Multi-Location Dimmer and Accessories
This document provides specifications and details for the Lutron MAESTRO Controls system, including dimmers, remotes, switches, receptacles, and wallplates.
Product Overview
The MAESTRO Controls system offers advanced lighting control solutions for residential and commercial applications. The High-Tech Multi-Location Dimmer provides smooth, variable control of light intensity and features a stylish, flush design.
Key Features:
- Microprocessor technology for precise control.
- Clean, flush, stylish appearance.
- Special features: Two taps for full brightness, press and hold for 10-second fade-off.
- LEDs indicate light level and serve as a locator light.
- Multi-location dimming support for up to 10 locations.
- Uses standard single-pole and 3-way wiring for easy installation.
- Raise from off functionality.
- Power-failure memory.
- Frequency compensation.
- Radio Frequency Interference suppression.
- Front accessible service switch (FASSTM) to disconnect load power.
- Electrostatic discharge tested.
- Precise color matching across all controls.
MAESTRO Smart Dimmers
The MAESTRO system includes various dimmers designed for different lighting types:
| Description | Load Type | Capacity | Model # |
|---|---|---|---|
| Preset Smart Dimmers | Incandescent | 600W / 1000W | MA-600- / MA-1000- |
| Preset Smart Dimmers | Electronic Low Voltage (ELV) | 600W | MAELV-600- |
| Preset Smart Dimmers | Magnetic Low Voltage (MLV) | 600VA (450W) / 1000VA (800W) | MALV-600- / MALV-1000- |
Note: For multi-location dimming, use one Smart Dimmer with up to nine Smart Remotes (MA-R-). Minimum load requirements apply (40W for Incandescent/MLV, 5W for ELV). Derating may be required if ganged.
MAESTRO Smart Remotes
Provide multi-location dimming control from up to nine additional locations. Remotes (MA-R-) are compatible with specific Maestro dimmers and do not have LEDs.
CLARO Accessories
Lutron's Claro accessories offer a coordinated look and expanded functionality:
Switches
| Description | Rating | Model # |
|---|---|---|
| General Purpose Switch | Single Pole, 120/277V, 15A | CA-1PSH- |
| General Purpose Switch | 3-way, 120/277V, 15A | CA-3PSH- |
| General Purpose Switch | 4-way, 120/277V, 15A | CA-4PSH- |
Receptacles
| Description | Rating | Model # |
|---|---|---|
| Receptacle | 15A, 125V | CAR-15H- |
| GFCI Receptacle | 15A, 125V | CAR-15-GFCIH- |
Jacks & Ports
| Description | Type | Model # |
|---|---|---|
| Single Telephone Jack | 6-conductor, RJ11 | CA-PJH- |
| Single Cable Jack | F-style 75-Ohm, coaxial cable | CA-CJH- |
Field Customizable Multi-Port Frame
A 6-Port Frame (CA-6PF-) accommodates various Lutron connectors, including Phone Jacks (Category 3, 5e, 6), Fiber Jacks (MT-RJ, SC, LC, ST), Cable Jacks (Coaxial), and BNC Jacks.
Standard Wallplates
Lutron Claro wallplates are available in 1-gang to 6-gang configurations, offering a seamless look with no exposed hardware. They are made from durable polycarbonate plastic with a gloss finish.
| Gang Size | Dimensions (W x H x D) | Model # Prefix |
|---|---|---|
| 1-Gang | 2.94" (75mm) x 4.69" (119mm) x 0.30" (7.6mm) | CW-1- |
| 2-Gang | 4.75" (121mm) x 4.69" (119mm) x 0.30" (7.6mm) | CW-2- |
| 3-Gang | 6.56" (167mm) x 4.69" (119mm) x 0.30" (7.6mm) | CW-3- |
| 4-Gang | 8.37" (213mm) x 4.69" (119mm) x 0.30" (7.6mm) | CW-4- |
| 5-Gang | 10.18" (259mm) x 4.69" (119mm) x 0.30" (7.6mm) | CW-5- |
| 6-Gang | 12.00" (305mm) x 4.69" (119mm) x 0.30" (7.6mm) | CW-6- |
Standard Colors/Finishes: White (WH), Ivory (IV), Almond (AL), Light Almond (LA), Gray (GR), Brown (BR), Black (BL).
Derating/Maximum Capacity
The maximum capacity of dimmers may be reduced when side sections are removed (for ganging). The table below outlines these capacities:
| Dimmer Type | Maximum Capacity | ||
|---|---|---|---|
| No side sections removed (Full Capacity) | One side section removed (End Units) | Two side sections removed (End Units) | |
| Incandescent Dimmers ¹ | 600W / 1000W | 500W / 800W | 400W / 650W |
| Electronic Low Voltage ² | 600W | 500W | 400W |
| Magnetic Low Voltage ¹ | 600VA (450W) | 500VA (400W) | 400VA (300W) |
| 1000VA (800W) | 800VA (650W) | 650VA (500W) | |
¹ Requires 40W minimum load.
² Requires 5W minimum load.
Wiring Diagrams
The MAESTRO Controls system supports various wiring configurations. The following diagrams illustrate common setups:
Illustrates a single dimmer controlling a lighting load. It shows connections for Hot, Load, and Neutral, with a TapSwitch™™ and an optional Cap Off position.
Depicts multi-location control using one Multi-Location Dimmer and up to nine Smart Remotes. Two configurations are shown: Control Line Side and Control Load Side.
Shows a dimmer/tapswitch with neutral connection for single-location wiring.
Illustrates multi-location wiring for ELV dimmers using a control load side setup with up to nine MA-R units.
Details the wiring for a single telephone jack, showing the pinout for a 6-conductor telephone jack.
Shows the standard wiring for a 15A receptacle, including connections for Hot, Neutral, and Ground.
Illustrates the wiring for a GFCI receptacle, detailing Line and Load connections, as well as ground connections.
Technical Specifications & Quality Assurance
Lutron MAESTRO Controls products are designed to meet high standards:
- Performance: Dimmers offer full-range, smooth control, minimize line frequency effects, and feature a mechanical air-gap switch (FASSTM).
- Surge Testing: Controls meet ANSI/IEEE Std. C62.41-1980, tested for voltage surges up to 4000V and current surges up to 200A.
- Environmental: Operate in ambient temperatures from 0°C (32°F) to 40°C (104°F).
- Power Failure Memory: Lights return to previous levels after power interruption.
- Interference Reduction: Designed to reduce interference with radio, audio, and video equipment.
- Color Match: Plastic parts exhibit minimal color variation (delta E of 1).
- UV Stability: Visible parts are UV stable.
- Quality Assurance: Manufacturer has over 10 years of experience. Products are UL listed, CSA and NOM approved. ISO 9001 certification is maintained.
- Warranty: All devices covered by a minimum one-year warranty.
Installation & Support
Installation should follow manufacturer's recommended procedures. Lutron provides 24/7 global customer service and technical support via phone and their website.
For more information, visit www.lutron.com/maestro.
