User Manual for KOFIRE models including: UG-05, Wireless Gaming Headsets with Dual Microphone, UG-05 Wireless Gaming Headsets with Dual Microphone

UG-05说明书英文版

UG-05说明书英文版 | Headphone Parameters Information

The headphone will enter pairing mode. ... *Note: The colorful decoration LED light will turn on automatically after the headphone turns on, and it can be turned o by key combination View

PDF Wireless Disconnection/Clear Connection Wireless Transmitter Parameters ...

5. User Manual 3. Micro USB charging cable 7. Mic Foam Cover 6. Wireless Transmitter Colorful Decoration LED Switch Boom Microphone Equipped with the long boom microphone for a better call experience. The long boom mic is to enhance the call performance. During a call, if you want to talk to

A1DK1EfZSgL
UG-05
USER MANUAL


LED Indicator Light Description

Pairing Status

Blue and green LED twinkle alternately

Power On

Blue LED stays on indefinitely, blue LED flashes slowly when music playing

Standby Mode

Blue LED stays on indefinitely

Low Battery Status Vibration Switch
Charging Status

Blue LED flashes 3 times per second
* Vibration switch is on: white LED stays on indefinitely * Vibration switch is off: white LED goes out Red LED stays on while in charging, red LED goes out while fully charged

Basic Key Operation

Turn On

Long press

, the headphone will turn on after blue LED stays on for

3 seconds. The headphone will enter the pairing mode.

Turn Off

Long press

, the blue and green LED will stay on for 2 seconds,

then go out, and the headphone will turn off.

Volume Adjustment

Short press

and

to control volume.

Music Selection
Long press Long press

to skip to the next song. to skip to the previous song.

Play/Pause/Phone call

Music Pause: Short press

when in music playing.

Music Play: Short press

when in music pause.

Answer Calls: Short press

when a call coming in.

Hang Up: Short press

when on a call.

Refuse to Answer: Long press

when a call coming in.

When Wireless is connected, double press will re-dial the last phone number

in your call record.

Headphone Turn On Status

Long press

, the headphone will turn on, and the blue and green LED will twinkle

alternately. The headphone will enter pairing mode. Turn on the Wireless in your cell phone and search for "UG-05", click to connect. The blue LED will stay on indefinitely after connected successfully, and the blue LED will flash slowly when music playing.

*Note: The colorful decoration LED light will turn on automatically after the headphone turns on, and it can be turned off by key combination.

Vibration Function Switch In the power-on status, flip the vibration switch down, the vibration function will be turned on (the white LED stays on indefinitely), and the headphone will vibrate with the bass. The stronger the bass, the stronger the vibration. Flip the vibration switch upward to turn off the vibration (the white LED goes out), then you can listen to music and play games normally, the vibrating speaker will not work, and the music speaker will work normally.
Colorful Decoration LED Switch After the headphones turn on, the colorful LED light will turn on automatically. If you want to turn off the colorful LED light for saving battery or for other reasons, short press the volume up and volume down button simultaneously to turn the LED off. The colorful LED can be restarted after turned off. *Note: The colorful LED light will not work while the headphone is in charging or in wired mode.
Boom Microphone
Equipped with the long boom microphone for a better call experience. The long boom mic is to enhance the call performance. During a call, if you want to talk to others, or you don't want to be heard by the person on the other end of the phone, short press the mute button on the microphone to stop the mic from working. When the mute is turned on, the headphone will beep. When you need to resume the call, short press the mute button again.
Auto off and Long-distance Reconnect The headphone will be disconnected automatically when out of the effective range. When back to effective range within 5 minutes, it will auto-connect with your phone. The headphone will turn off automatically if out of the effective for range over 5 minutes.

Headset And Wireless Transmitter Overview

LED Indicator
On/Off Answer/Hang Up
Play/Pause
Vol +/ Next Track
Vol -/ Previous Track
Vibration Switch
Micro USB Charging port
Built-in Microphone
Microphone Mute Button
Long Boom Microphone

3.5MM Audio Port
LED Indicator Multifuction Button
USB

Decoration LED Light

Charging Mode When in a low battery, please charge it for around 3 hours with USB charging cable The headphones will be turned off automatically while charging. Red LED stays on indefinitely while in charging, and red LED goes out while fully charged.
Power Status When the headphone is connected to the IOS device, the current power status of the headphone will be showed on the upper right corner of the device screen.
Line-in Mode Plug in audio cable, the headphone turns off automatically, you can listen to the music with the audio cable. You can use the built-in microphone or long boom mic rophone. Also, you can turn on or off the vibration function by the vibration switch. Note: when in line-in mode, the Wireless can't be turned on. You need to unplug the audio cable and turn on the headphone to use.
Wireless Transmitter LED Indicator Description

Power On
Pairing Status Connection Succeeded

Red LED stays on indefinitely Green LED flashes quickly Green LED stays on indefinitely

For the First Time Using  Insert the Wireless transmitter into the USB port of the device, the device will automatically install the driver, the name displayed on the device is: UG-05, and the default is device audio transmission, the transmitter enters the standby state with the red LED lighting on indefinitely.  The Wireless device enters the pairing state after power on, long press the button on the Wireless transmitter for 2 seconds to enter the pairing status, and the green LED will flash quickly.  The Wireless transmitter is successfully connected with the Wireless device, and the green LED will stay on indefinitely.
For the Second Time and Subsequent Using When there is pairing information of the headphones on the device, for the second time using, the Wireless transmitter will automatically connect back to the Wireless device.
Connect with Other Wireless Devices Short press the transmitter button, the Wireless transmitter will be disconnected with the current device with the red LED lighting on indefinitely, and the Wireless device will be turned off. Long press the transmitter button for 2 seconds to connect with other devices, the green LED will flash quickly and stay on indefinitely after connected successfully.
Power On/Power Off Insert the Wireless transmitter into the USB port of the computer and it will automatically turn on./Unplug the Wireless transmitter.
Wireless Connection Long press the transmitter button for 2 seconds, the Wireless transmitter enters pairing status with the green LED flashing quickly, now it supports listening to music, Wireless video playback, Wireless video calls, etc.

Wireless Disconnection/Clear Connection Short press the Wireless transmitter button, and the red LED will stay on indefinitely./In any state, long press the transmitter button for 8 seconds, the green and red light will stay on indefinitely.

Headphone Parameters Information

Profiles Supported Receiving distance Sound Speaker Resistance Sounding Horn Unit Vibration Speaker Resistance Vibration Speaker Unit Frequency Range

A2DP/AVRCP/SMP/HFP 8-10M 32±15% 40mm 16±15% 30mm 20 HZ---20K HZ

Sensitivity

108±3dB at 1K HZ

Microphone Sensitivity

-42 ± 3dB

Charging Voltage Charging Current

DC5V 800mA

Operating Voltage

3.7V

Operating Current

26-120mA

Wireless Transmitter Parameters Information

Input Signal-to-Noise Ratio Frequency Range Transmission Range Operating Voltage
Operating Current

USB2.0 >90dB 20HZ---20KHZ 20M 5V 14mA---27mA

Packing List

1. Wireless Headphone 2. Boom Microphone

4. Audio Cable 5. User Manual

3. Micro USB charging cable

6. Wireless Transmitter

7. Mic Foam Cover

Warm Tips
1. Please charge the headphone with 5V 1A / 5V 2A charger, high voltage may damage the headphone. 2. When the headphone has not been used for more than 3 months, it needs to be charged before use.

3. When the headphone has not been used for a long time, we suggest you charge every 3 months to provide good protection for the battery. 4. We suggest you fully charge the headphone for the first time use.
Attentions
1. Please keep or use the headphone at normal temperature, avoid direct sunlight. 2. Please keep the headphone away from fire or other hot objects. 3. Please keep the headphone away from damp places or submerged in liquid, keep dry 4. Please don't try to use other methods of charging other than the USB charging cable we provide. 5. Please don't disassemble, repair, or modify. 6. Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for assistance by the contact information on the warranty card. 7. If the headphone produces an abnormal smell, higher than normal temperature, color, or shape changes abnormally, please stop using and turn to us for assistance by the contact information on the warranty card.
Warning
1. If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or the similar overheating environment. 2. The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids. 3. This product is not a children's toy. Children under the age of 14 need to be accompanied by parents to use.


Adobe PDF library 15.00 Adobe Illustrator(R) 24.0