Introduction
This user manual provides essential information for the safe and effective operation of the VEVOR Demolition Jack Hammer Concrete Breaker 3500W. Please read all instructions carefully before operating the equipment. VEVOR reserves the right to interpret the user manual.
Product Information
Model: Z1G-DS-107M
Power: 3500W
Voltage: 230-240 V~50 Hz (EUR/AUS) / 120V~ 60Hz (US)
Included Accessories: 2 Chisel Bits
Safety Precautions
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection.
- Ensure the work area is well-ventilated and free of obstructions.
- Keep bystanders away from the operating area.
- Inspect the tool and accessories for damage before each use.
- Do not operate the tool if damaged or malfunctioning.
- Disconnect the power supply before changing accessories or performing maintenance.
- Avoid operating in wet conditions.
- Do not modify the tool.
Assembly and Operation
Assembly:
- Insert one of the chisel bits into the tool holder. Ensure it is securely locked in place.
Operation:
- Connect the power cord to a suitable power outlet.
- Grip the tool firmly with both hands.
- Press the power switch to start the tool.
- Apply steady pressure to the tool against the surface to be broken. Allow the tool to do the work.
- To stop the tool, release the power switch.
Maintenance
- Keep the tool clean and free of dust and debris.
- Lubricate moving parts as recommended in the full manual.
- Store the tool in a dry, secure place.
Troubleshooting
For specific troubleshooting guidance, please refer to the complete user manual or contact VEVOR customer support.
Contact Information
For product questions or technical support, please contact VEVOR Customer Service at CustomerService@vevor.com.
