Book Overview
This document, "Develop and Operate Your LoRaWAN IoT Nodes," authored by Claus Kühnel and published by Elektor International Media B.V., serves as a comprehensive guide for individuals looking to build and manage Internet of Things (IoT) nodes using LoRaWAN technology. It focuses on integrating ready-to-use devices and custom-built Arduino nodes within the popular "The Things Network" (TTN) ecosystem.
Diagram Description: The cover page illustrates a fundamental LoRaWAN network architecture. It depicts an 'End-Device', characterized by sensor icons (e.g., temperature, battery), establishing a 'Connection LoRa' to a 'Gateway'. The Gateway then communicates via 'Connection IP' to an 'Application Server'. The diagram also highlights key platforms and services integral to the LoRaWAN ecosystem, including Datacake, ThingSpeak, MQTT, Node-RED, The Things Stack Community Edition, and The Things Network, suggesting the practical applications and integrations covered in the book.
Table of Contents
- Chapter 1 • Preface
- Chapter 2 • LoRa
- Chapter 3 • LoRaWAN
- Chapter 4 • TTN Infrastructure
- Chapter 5 • LoRa Transceivers
- Chapter 6 • Reduction of Current Consumption
- Chapter 7 • LoRaWAN Nodes
- 7.1 Commercial End Devices
- 7.1.1 Elsys ERS Lite – LoRaWAN Room Sensor
- 7.1.2 Dragino LHT65 Temperature & Humidity Sensor
- 7.1.3 Dragino LDS01 Door & Windows Sensor
- 7.1.4 Dragino LDS02 Door & Windows Sensor
- 7.1.5 Dragino GPS Tracker LGT-92
- 7.1.6 tabs Healthy Home Sensor IAQ
- 7.1.7 Big Clown LoRaWAN Monitor
- 7.1.8 CleverCity Greenbox
- 7.2 Boards
- 7.1 Commercial End Devices
- Chapter 8 • Glossary
- Chapter 9 • Index
- Chapter 10 • List of figures
- Chapter 11 • References
Publication Information
This is an Elektor Publication. Elektor is the media brand of Elektor International Media B.V.
Address: PO Box 11, NL-6114-ZG Susteren, The Netherlands
Phone: +31 46 4389444
Copyright: © 2022 Elektor International Media B.V.
ISBN (Print): 978-3-89576-494-3
ISBN (eBook): 978-3-89576-495-0
Prepress Production: D-Vision, Julian van den Berg
Printed in: The Netherlands by Ipskamp Printing, Enschede
Elektor is part of EIM, a leading source of technical information and electronics products for engineers and designers. They deliver high-quality content across various media channels in several languages, focusing on electronics design and DIY electronics. Visit elektormagazine.com for more information.
All rights reserved. No part of this publication may be reproduced without written permission from the copyright holder, except in accordance with applicable laws.
The author and publisher have used their best efforts to ensure the correctness of the information, but disclaim liability for errors or omissions.
Programs provided in the book are copyrighted by the Author and Elektor International Media and are intended for educational purposes only. Commercial use requires written permission.
