Setty Bluetooth Earphones

Introduction

Thank you for purchasing a product by Setty. Before use, please refer to the User's manual, and save it for future reference. Do not disassemble the device on your own - all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. The device should not be exposed directly to water, moisture, sunlight, fire or other heat sources. We hope that the product by Setty fulfills your expectations.

Product Diagram and Components

The product consists of the following components:

• 1. Charging case: The case used to store and charge the earphones.
• 2. Multifunctional button: A button on each earphone for controlling playback, calls, and pairing.
• 3. LED indicator: Lights on the earphones and/or case indicating status (e.g., charging, pairing).
• 4. Speaker: The audio output component within the earphone.
• 5. Microphone: The component for voice input during calls.
• 6. Micro-USB charging port: The port on the charging case for connecting a power source.

Specifications

• Bluetooth version: v 5.0
• Bluetooth range: 10 m
• Battery capacity (earphones): 30 mAh
• Battery capacity (case): 300 mAh
• Charging time: around 2 hours
• Calls/music playing time: up to 4 hours
• Standby time: up to 6 hours

Pairing

1. Open the charging case and remove the earphones.
2. Press the multifunctional buttons on the earphones. Blue LEDs will turn on.
3. Activate Bluetooth on your device (e.g., phone) and select "Setty" from the list of available devices.
4. The devices will pair up, and you will hear "connected." The flashing LEDs on the earphones will turn off.
5. Placing the earphones into the charging case will cause them to automatically disconnect.
6. TWS earphones can connect to a phone as a pair or work independently.
7. TWS earphones will automatically turn off after 5 minutes if not paired with any device.

Turning the Earphones Off

To turn the earphones off without placing them in the case, hold the multifunctional buttons for 5 seconds.

Playing Music

Ensure devices are paired. Start playing music on your device.

• Pause/Resume: Short press the multifunctional button on either earphone.
• Next Track: Quick triple-press the multifunctional button on the left earphone.
• Previous Track: Quick triple-press the multifunctional button on the right earphone to rewind to the beginning, or quick triple-press the left earphone again to skip to the previous track.
• Siri Activation (iOS only): Press and hold the multifunctional button for 3 seconds.

Volume Control

Volume can be controlled independently from the connected device.

• Increase Volume: Quickly press the multifunctional button on the left earphone twice.
• Decrease Volume: Quickly press the multifunctional button on the right earphone twice.

Making and Receiving Calls

Ensure devices are paired. You can make calls by dialing on your device.

• Incoming Calls: You will hear the caller's number.
• Answer Call: Quickly press the multifunctional button on one of the earphones once.
• Reject Call: Press and hold the multifunctional button on one of the earphones for 2 seconds.

Low Battery Signal and Charging

When the battery is low, the earphones will emit a sound. Place them in the charging case to charge.

• The red LED on the earphones indicates charging.
• The red LED turns off when the earphones are fully charged.
• The case can charge the earphones up to 4 times.

Warnings

• Keep away from moisture and heat.
• Keep away from Wi-Fi routers or other devices using high frequencies to avoid interference.
• Recommended usage distance is up to 10 meters from the device to prevent signal loss.
• The device can be paired with devices having Bluetooth connectivity, such as phones, PCs, or tablets.
• Prolonged listening at high volumes may lead to hearing impairment and health problems.
• When listening to music while driving, pay close attention to your surroundings.

Compliance and Manufacturer Information

TelForceOne S.A. declares that this product is compatible with the essential requirements and other relevant provisions of Directive 2014/53/UE. The declaration of conformity can be downloaded from https://sklep.telforceone.pl/en-gb/.

Electrical and electronic devices should not be disposed of with domestic waste. By recycling, reusing materials, or otherwise utilizing old devices, you contribute to protecting our environment.

Certifications: [CE Mark], [RoHS Compliant], [PE]

Manufacturer: TelForceOne S.A.

Address: Krakowska 119, 50-428 Wrocław, POLAND

Design: Designed by SETTY in EU, Produced in PRC

Directive Compliance: 2011/65/UE