Sony RX1R III Digital Camera
Quick Start Guide
Model: DSC-RX1RM3
Manual Number: WW697160 / WW402748
About the "Help Guide"
For detailed instructions on using the camera, please refer to the "Help Guide" (web manual) available at: https://rd1.sony.net/help/dsc/2510/h_zz/
DSC-RX1RM3 Help Guide
Preparation
Checking Package Contents
The numbers in parentheses indicate the quantity.
- Camera (1)
- Rechargeable Battery NP-FW50 (1)
- Strap (1)
- Lens Cap (1) (attached to camera)
- Shoe Cap (1) (attached to camera)
- Viewfinder Cover (1)
- Wrapping Cloth (1)
- Quick Start Guide (this guide) (1)
- User Manual (1)
Inserting the Battery and Memory Card
Open the battery/memory card cover. Insert the battery and a memory card into the camera. Then, close the cover.
Insert the battery pack while holding the lock lever pressed.
Pay attention to the orientation of the notched corner.
This camera is compatible with SD memory cards. If you are using a memory card for the first time with this camera, format the card using the camera to ensure smooth operation.
Charging the Battery Pack
Charging Indicator Light
For External Power Source
Turn the camera OFF. The battery pack will not charge if the camera is turned ON.
Connect the camera's USB Type-C connector to the USB Type-C connector of a USB PD (USB Power Delivery) compatible device using a commercially available USB Type-C cable (USB-C to USB-C).
The charging indicator light will illuminate when charging begins. Charging is complete when the light turns off.
Use a USB PD compatible device with an output of at least 18W (9V/2A) and a USB Type-C cable that supports at least 3A current.
Performing Initial Setup
If you connect the camera to a smartphone via Bluetooth (pairing), you can perform initial setup, such as setting the date and time, from your smartphone. Install the smartphone application on your smartphone beforehand, then follow steps 1 to 4 of "Initial Setup Procedures".
Installing the Smartphone Application
You can install the application from the following website. Update the smartphone application to the latest version.
Initial Setup Procedures
- Turn on the camera by setting the ON/OFF power switch to "ON".
- Select the desired language, then press the center of the control wheel.
- The screen reader function setup screen and a privacy statement will appear. Read the privacy statement regarding biometrics by opening the link on a smartphone or similar device. Press the center of the control wheel.
- Follow the on-screen instructions on the camera to connect the camera and smartphone and complete the initial setup. Initial settings can be configured or modified later via the camera's MENU.
Connecting the Camera and Smartphone Later (Pairing)
For details on the connection method, refer to the following Help Guide:
Shooting
Taking Photos
- Mode Dial: Select the desired shooting mode by turning the mode dial.
- Shutter Button: Press the shutter button halfway to focus. Press fully to take the picture.
Shooting Movies
- Turn the mode dial to (Movie) mode, then press the shutter button to start recording.
- Press the shutter button again to stop recording.
Attaching the Viewfinder Cover
The viewfinder cover shades the area between the viewfinder and your eye, blocking ambient light and improving viewfinder visibility. Loosen the viewfinder cover's screw until it can no longer turn, then fit the viewfinder cover directly onto the viewfinder and tighten the screw to secure it.
Viewing and Processing RAW Images on a Computer
You can install the computer software from the following website. Update the computer software to the latest version before use.
Using the Wrapping Cloth
The wrapping cloth (included) protects the camera from scratches and dirt during transport. For details on using the wrapping cloth, refer to the Help Guide:
Notes on Usage
Refer to the "Precautions" section in the "Help Guide".
About Smartphone/Computer Applications
Application specifications are subject to change without notice.
Notes on Using the Device
- Do not expose the lens or viewfinder to strong light sources, such as direct sunlight. Doing so may cause smoke, fire, or malfunction within the camera body or lens due to the lens's light-concentrating properties. Always attach the lens cap to the lens when exposing the camera to light sources like sunlight. If sunlight or other strong light enters the camera through the lens, it can focus and cause smoke or fire inside the camera. Always attach the lens cap when the camera is not in use. When shooting backlit subjects, be careful to keep the sun well outside the angle of view. It may still cause smoke or fire even if it is slightly outside the angle of view.
- The camera (including its accessories) contains magnets that may interfere with the operation of pacemakers, programmable hydrocephalus shunts, and other medical devices. Do not place the camera near persons using such medical devices. If you use such medical devices, consult your doctor before using the camera.
- Increase the volume gradually. Sudden loud noises can cause hearing damage.
- Do not leave this unit, the supplied accessories, or memory cards within reach of infants. They may swallow them accidentally. If this happens, consult a doctor immediately.
- When shooting with the viewfinder, you may experience eye strain, fatigue, nausea, or dizziness. It is recommended to take regular breaks when shooting with the viewfinder.
- If the electronic viewfinder screen is damaged, stop using the camera immediately. Damaged parts may injure your hands, face, etc.
- During continuous still shooting, the shooting screen and a black screen may alternate rapidly on the screen or in the viewfinder. If you look at the screen for a long time in such a case, you may experience uncomfortable symptoms such as feeling unwell. If you experience uncomfortable symptoms, discontinue use of the camera and consult a doctor if necessary.
- When recording for extended periods or shooting 4K movies, if a specific area of your skin remains in prolonged contact with the camera, you may experience symptoms of low-temperature burns, such as redness or blistering, even if the camera does not feel hot. Take special care under the following circumstances and use a tripod, etc.:
- When using the camera in a high-temperature environment.
- When the camera is used by a person with poor circulation or reduced skin sensation.
- When the camera's [Auto Power Off Temp.] setting is set to [High].
Sony Accessories
Using this unit with products from other manufacturers may affect its performance and could cause accidents or malfunctions.
Note on 5 GHz Wireless LAN Frequency Band
When using the wireless LAN function outdoors, set the frequency band to 2.4 GHz as follows:
MENU → [Network] → [Wi-Fi] → [Wi-Fi Frequency Band]
Temporarily Turning Off Wireless Network Functions
You can temporarily turn off all wireless network functions using the [Airplane Mode] function, for example, when boarding an aircraft.
Turning Wi-Fi On/Off
Select: MENU → [Network] → [Wi-Fi] → [Wi-Fi Connection] → [On] or [Off].
Turning Bluetooth On/Off
Select: MENU → [Network] → [Bluetooth] → [Bluetooth Function] → [On] or [Off].
For European Customers
Sony Corporation hereby declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.compliance.sony.eu
The following restrictions and requirements apply to this radio equipment regarding its operation and licensing in the following countries: AT/BE/BG/CY/CZ/DK/EE/FI/FR/DE/EL/HU/IE/IT/LV/LT/LU/MT/NL/PL/PT/RO/SK/SI/ES/SE/UK/UK(NI)/HR/IS/LI/NO/CH/AL/BA/MK/MD/RS/ME/XK/TR: operation in the 5150-5350 MHz band is restricted to indoor use only.
The power supplied by the charger must be between the minimum 2.5 watts required for operating the radio equipment and the maximum 27 watts required to achieve maximum charging speed.
USB-PD Fast Charging
[Diagram: USB-PD Fast Charging with power range 2.5-27W]
Specifications
| Category | Details |
|---|---|
| Camera | |
| [System] | Camera Type: Digital Camera Lens: ZEISS Sonnar T* 35mm prime lens |
| [Image Sensor] | Image Format: 35mm full-frame CMOS image sensor Approx. number of effective pixels: Approx. 61.0 megapixels (still images) / Approx. 50.8 megapixels (movies) Approx. total number of pixels: Approx. 62.5 megapixels |
| [General] | Rated voltage: 7.2 V ---, 3.2 W Operating temperature: 0 to 40 °C Storage temperature: -20 to 55 °C Dimensions (W/H/D) (approx.): 113.3 × 67.9 × 87.5 mm 113.3 × 67.9 × 74.5 mm (from front of lens to screen) Weight (approx.): 498 g (with battery and SD card) |
| [Wireless LAN] WW697160 | Supported format: IEEE 802.11 a/b/g/n/ac Frequency band: 2.4 GHz/5 GHz |
| [Environmental Protection and Energy Saving] | Power consumption (off): Not available Power consumption (standby/low power mode): 0.5 W Power consumption (network standby): 2.0 W (Bluetooth) / 2.0 W (all terminals and networks connected) Low power mode activation: 20 minutes (default) Network standby activation: 20 minutes (default) |
| Rechargeable Battery, NP-FW50 | Rated voltage: 7.2 V --- Recommended USB PD-compatible AC adapter: Input: 100-240 V~, 50/60 Hz Output: 9V/2A or more |
Format and specifications are subject to change without notice.
Compatible iPhone/iPad Models
iPhone 16 Pro Max, iPhone 16 Pro, iPhone 16 Plus, iPhone 16, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (3rd generation), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPad Pro 13-inch (M4), iPad Pro 12.9-inch (2nd to 6th generation), iPad Pro 11-inch (M4), iPad Pro 11-inch (1st to 4th generation), iPad Pro 10.5-inch, iPad Air 13-inch (M2), iPad Air 11-inch (M2), iPad Air (3rd to 5th generation), iPad (6th to 10th generation), iPad mini (5th to 6th generation) (As of January 2025)
Trademarks/Licenses
- Cyber-shot is a trademark of Sony Group Corporation.
- Apple, iPhone, and iPad are trademarks of Apple Inc. in the United States and other countries.
- USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
- HDMI™, HDMI High-Definition Multimedia Interface, and the HDMI Trade dress are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
- Wi-Fi®, the Wi-Fi logo, and Wi-Fi Protected Setup are trademarks or registered trademarks of Wi-Fi Alliance.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its affiliates is under license.
- QR Code is a trademark of Denso Wave Inc.
- Other system and product names appearing in this manual are trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ and ® symbols may not be used in all cases in this manual.
IMPORTANT - Read the End User License Agreement before using the Sony product. By using the product, you agree to the End User License Agreement. The software license agreement between you and Sony can be viewed at the following URL: (https://rd1.sony.net/help/di/el23/h_zz/)
The use of the "Made for Apple" badge means that an accessory has been designed to connect specifically to Apple products identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Power Management
Disabling the power management function increases the device's power consumption.
Support
For more information about this product and answers to frequently asked questions, please visit the Customer Support website:
https://www.sony.net/SonyInfo/Support/
©2025 Sony Corporation
