21" Rear Bagging Rear Drive Self Propelled Rotary Mower
Models WRRB4SP21F, ORRBSP21F
Exploded View Diagram Description
The diagram presents an exploded view of the MTD 21-inch rear bagging, rear-drive, self-propelled rotary mower, illustrating the arrangement and assembly of its various components. It details the engine (components 57-68, 111), the main deck structure (components 1-5, 18, 20, 21, 26, 36, 41, 46, 52, 56, 84, 93, 95, 102, 103, 105, 113), the handle and control mechanisms (components 6, 8, 9, 10, 17, 32, 33, 34, 35, 50, 54, 57, 58, 59, 61, 76, 77, 78, 79, 80, 85, 86, 87, 88, 89, 90, 91, 92, 96, 99, 100, 101, 104, 106, 108, 109, 110, 111, 112, 114), and the grass catcher system (components 22, 25, 39, 42, 43, 44, 45, 107). Key components like the blade (part 4), drive shaft (part 26), belts (part 84), and various adjustment mechanisms are also depicted with corresponding part numbers.
Parts List
Index | Part No. | Description |
---|---|---|
1 | 012641 | Deck-Red |
2 | 029298 | Deck Green |
3 | 024174 | Bracket idler mount |
4 | 030338 | Blade 21" offset |
5 | 041848 | Wheel 8" x 1.75 front |
6 | 051250 | Throttle control w/cable |
7 | 051649 | Control ground drive w/cable |
8 | 051540 | Cable engine/blade control* |
9 | 071449 | Handle lower |
10 | 071100 | Handle upper |
11 | 090589 | Back plate front adjuster |
12 | 090613 | Setting lever - front adjuster |
13 | 090977 | Wheel lever - front adjuster |
14 | 090746 | Setting lever - rear adjuster |
15 | 090761 | Back plate rear adjuster |
16 | 090910 | Wheel lever - rear LH |
090894 | Wheel lever rear RH | |
17 | 097659 | Bail engine/blade control* |
18 | 105825 | Baffle front |
19 | 106005 | Blade washer |
20 | 097162 | Handle bracket - R.H. |
21 | 097170 | Handle bracket - L.H. |
22 | 109546 | Catcher hook |
23 | 107128 | Drive support mtg. brkt. |
24 | 109496 | Backing strip |
25 | 108324 | Latch rear bagger |
26 | 108357 | Drive shaft |
27 | 107193 | Idler arm |
28 | 109082 | Stepped sleeve |
29 | 127191 | Height Adjuster Assembly rear LH |
30 | 126926 | Baffle Assembly |
31 | 128918 | Height Adjuster Assembly rear RH |
32 | 111526 | Actuator engine control |
33 | 110379 | Cable tie |
34 | 110510 | Plastic tip - rear adjuster |
35 | 112540 | Plastic tip - front adjuster |
36 | 112037 | Dust cover rear wheel |
37 | 112144 | Belt cover |
38 | 111633 | Vinyl trailing shield* |
39 | 111724 | Knob catcher latch |
40 | 126466 | Blade adapter |
41 | 128140 | Wheel rear, w/gear |
42 | 133371 | Torsion spring catcher latch |
43 | 143115 | Decal - Danger* |
44 | 002451 | Decal door caution* |
45 | 001206 | Decal blade warning* |
46 | 144899 | Decal - starting instructions |
47 | 715607 | Washer 3/8 Belleville |
48 | 150011 | Carriage bolt- 1/4-20 x 5/8 |
49 | 150730 | Wheel bolt - front |
50 | 150201 | Curved washer - 5/16 |
51 | 150276 | Woodruff key #6 |
52 | 150623 | Bolt slotted hex #10 x 5/8 |
53 | 790451 | Ring retainer |
54 | 151944 | Bolt machine 10-24 x 2 |
55 | 153601 | Self tap screw 1/4-20 x 3/4 |
56 | 151449 | Washer wheel retaining |
57 | 151613 | Bolt hex head sems #10-32 x 3/8 |
58 | 151621 | Screw self drilling #6-20 x 1/2 |
59 | 150235 | Wing nut 5/16-18 |
60 | 151928 | Curved head bolt 5/16 - 18 x 1.75 |
61 | 152074 | Rope stop |
62 | 152405 | Bolt carriage 3/8-16 x 3/4 |
63 | 152413 | Washer plastic 3/4 x 11/32 x .095 |
64 | 152421 | Washer spring |
65 | 157255 | Bolt blade |
66 | 152371 | Eyebolt Rope guide |
67 | 152637 | Spacer bagger latch |
68 | 110833 | Spark Plug Cover |
69 | 153643 | Bolt shoulder |
70 | 128686 | Height Adjuster Assembly - front |
71 | 154393 | Nut Snap in 1/4 - 20 |
72 | 153817 | Bolt hex head 3/8-16 x 1/2 |
73 | 153841 | Snapring 7/8 |
74 | 153858 | Spring washer 7/8 |
75 | 152553 | Thrust washer 1/2" I.D. |
76 | 153908 | Bolt Hook |
77 | 170456 | Pulley 3/8" bore |
78 | 170464 | Bearing flange ball |
79 | 170530 | Pulley ext hub 3/8" bore |
80 | 170670 | Pulley drive 1/2" bore |
81 | 170993 | Pinion ratchet R.H. |
82 | 170985 | Pinion ratchet L.H. |
83 | 170811 | Drive pawl |
84 | 170829 | V-belt |
85 | 170878 | Idler - pulley |
86 | 310151 | Nut nylon insert- 5/16-18 |
87 | 312322 | Bolt hex hd 3/8-16 x 1.75 |
88 | 450346 | Bolt hex hd 5/16-18 x 3/4 |
89 | 326348 | Shouldered spacer |
90 | 449587 | Bolt hex hd 1/4-20 x 5/8 |
91 | 151985 | Nut hex 10-24 |
92 | 152181 | Screw bail retaining |
93 | 451419 | Nut TL flange 1/4-20 |
94 | 452318 | Nut hex nylon insert #10-24 |
95 | 457168 | Bolt thread form 3/8-16 x 7/8 |
96 | 458687 | Bolt hex #10-24 x 1/2 |
97 | 156851 | Bolt 1/4-20x3/8 SHVD HD |
98 | 715011 | Hairpin Cotter |
99 | 715037 | Nut keps 1/4 - 20 |
100 | 715078 | Nut flange whiz 1/4-20 |
101 | 715086 | Locknut hex 3/8-16 |
102 | 715193 | Roll pin 3/16 x 1 |
103 | 715524 | Nut hex 3/8 16 Jam |
104 | 715292 | Bolt hex head 1/4-20 x 1 |
105 | 715300 | Washer flat 1/4" |
106 | 156919 | Lockwasher 3/8 HD Split |
107 | 715417 | Washer - 3/8 |
108 | 715508 | Nut top lock - 1/4 - 20 |
109 | 468801 | Sleeve- idler cable |
110 | 789883 | E-ring |
111 | 150318 | Cable clamp |
112 | 127167 | Door assembly* |
113 | 451492 | Nut 3/8-16 TopLock |
114 | 153874 | Bolt 1/4-20 x 2 1/4 |
Notes and Specifications
Note: Parts are right or left hand as viewed from the operator position.
Approximate Cutting Heights: 1 1/8" to 3 1/8"
Specifications subject to change without prior notice.
* Indicates optional equipment.