MTD 21" Rear Bagging Self-Propelled Rotary Mower - Model 21-2181F Parts Information
Diagram Overview
The original document includes an exploded view diagram illustrating the assembly of the MTD 21-inch rear bagging self-propelled rotary mower, model 21-2181F. This diagram visually represents how various components, including the engine, deck, handle assembly, wheels, and bagging system, fit together. Each part in the diagram is identified by a numerical index that corresponds to the detailed parts list provided below.
Parts List
Index | Part No. | Description |
---|---|---|
1 | 024604 | Drive Cover |
2 | 013557 | Deck-21" Red |
3 | 030338 | Blade 21" |
4 | 040303 | Wheel Assemblies. 8" Plastic-White-Cog-Roller Bearing |
040741 | 8" Plastic-White-Cog-Nylon Bearing | |
041103 | 8" Steel-White-Cog-Bail Bearing | |
5 | 051227 | Control-Throttle w/Cable |
6 | 051532 | Cable-Engine/Blade Control* |
7 | 051623 | Drive Control |
8 | 071092 | Handle-Upper |
071100 | Handle-Upper with Cushion Grip. | |
9 | 071449 | Handle-Lower |
10 | 090589 | Back Plate-Height Adjuster |
11 | 091033 | Wheel Arm Assy. |
12 | 715524 | Locknut-3/8-16 Jam |
13 | 105825 | Baffle-Front |
14 | 106005 | Blade Washer |
15 | 108324 | Catcher Latch |
16 | 097162 | Handle Bracket-Right Hand |
17 | 097170 | Handle Bracket-Left Hand |
18 | 109546 | Catcher Frame Bracket |
19 | 109496 | Backing Strip-Trailing Shield* |
20 | 127191 | Baffle Assembly-Rear |
21 | 110833 | Cover-Spark Plug |
22 | 097725 | Bail-Engine/Blade Control* |
23 | 110379 | Cable Tie |
24 | 110494 | 'O'-Ring. |
25 | 111112 | Oil Fill Tube. |
26 | 111120 | 'O'-Ring. |
27 | 112540 | Plastic Tip-Height Adjuster |
28 | 111724 | Knob-Catcher Latch |
29 | 111526 | Actuator-Engine Control |
30 | 111625 | Trailing Shield* |
31 | 156125 | Bolt-Shoulder |
32 | 120295 | Master Link #65 |
33 | 125237 | Oil Dip Stick and Cap. |
34 | 127167 | Door Assembly* |
35 | 126466 | Blade Adapter |
36 | 133371 | Torsion Spring-Catcher Latch |
37 | 143115 | Decal-Danger* |
38 | 002451 | Decal-Door Caution* |
39 | 001461 | Decal-Blade Warning* |
40 | 144899 | Decal-Starting Instructions |
41 | 150011 | Bolt-Carriage 1/4-20 x 5/8 Gr. 5 |
42 | 150201 | Washer-Curved 5/16 |
43 | 150235 | Wing Nut 5/16-18 |
44 | 150276 | Woodruff Key No.6 |
45 | 150318 | Cable Clamp |
46 | 150623 | Screw-Hex Head Sheet Metal #10 x 5/8 |
47 | 156133 | Shoulder Bolt-Wheel Rear |
48 | 157255 | Bolt-Blade 3/8-24 x 1 1/4 |
49 | 151522 | Bolt #10-24 x 3/4 |
50 | 151613 | Bolt-Hex Head SEMS 10-32 x 3/8 |
51 | 151928 | Bolt-Curved Head Crg 5/16-18 x 1-3/4 |
52 | 151944 | Boit-Oval HD Mach., #10-24 x 2 |
53 | 151985 | Nut-Hex, #10-24 |
54 | 152074 | Rope Stop |
55 | 152082 | Shoulder Screw-Oil Dip Stick. |
56 | 152181 | Screw-Bail Retaining |
57 | 152405 | Bolt-Carriage 3/8-16 x 3/4 |
58 | 156182 | Washer-Plastic-Height Adjuster |
59 | 152421 | Washer-Spring-Height Adjuster |
60 | 153890 | Eyebolt-10-24 x 2 |
61 | 153643 | Shoulder Bolt |
62 | 152371 | Rope Guide |
63 | 152637 | Spacer-Catcher Latch |
64 | 715607 | Washer-3/8 Belleville |
65 | 152686 | Spacer-Rear Wheel |
66 | 170142 | Sprocket-8 Tooth |
67 | 310151 | Locknut-5/16-18 Nylock |
68 | 450346 | Bolt-5/16-18 x 3/4 |
69 | 314096 | Rollpin 3/16 x 1-1/4 |
70 | 317016 | Cotter Pin 1/8 x 1 |
71 | 416693 | Pinion |
72 | 417741 | Shaft |
73 | 423319 | Bearing |
74 | 425306 | Chain |
75 | 449587 | Bolt-Hex, 1/4-20 x 5/8 |
76 | 451419 | Locknut 1/4-20 Flanged Top |
77 | 451492 | Nut-3/8-16 |
78 | 452250 | Push Nut-3/8 |
79 | 452318 | Nut #10-24 Hex Nylon Insert |
80 | 457168 | Bolt-3/8-16 x 7/8 Thread Forming |
81 | 458687 | Bolt-Hex Head 10-24 x 1/2 |
82 | 459206 | Bolt 1/4-20 x 5/8 |
83 | 156166 | Shoulder Bolt-Wheel Front |
84 | 463778 | Bearing Plate |
85 | 468397 | Spacer |
86 | 714170 | Decal-Rating Plate |
87 | 715011 | Hitch Pin #3 |
88 | 715037 | Locknut 1/4-20 Keps |
89 | 715078 | Nut 1/4-20 Flange Whiz |
90 | 153874 | Bolt-1/4-20 x 2 1/4 Hex |
91 | 715193 | Rollpin 3/16 x 1 |
92 | 715292 | Bolt-Hex Head 1/4-20 x 1 |
93 | 715300 | Washer 1/4" |
94 | 156919 | Lockwasher 3/8 HD Split |
95 | 156877 | Washer-3/8 Hardened |
96 | 715508 | Locknut 1/4-20 Top |
97 | 771691 | Bracket |
98 | 109058 | Bracket-Pivot |
99 | 109017 | Bracket-Arm |
100 | 108951 | Bracket-R.H. |
101 | 775817 | Spring |
102 | 775858 | Spring-Drive Control |
103 | 778696 | Arm-Actuator |
104 | 783605 | Rod-Engagement |
105 | 156851 | Bolt-1/4-20 x 3/8 SH HD |
Notes and Specifications
NOTE: PARTS ARE RIGHT OR LEFT HAND AS VIEWED FROM THE OPERATOR POSITION
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
• INDICATES OPTIONAL EQUIPMENT
APPROXIMATE CUTTING HEIGHTS 1 1/8" TO 3 1/8"