Klein Tools
Home > Catalog > Test & Measurement > Electrical Testers
Dual Range NCVT with Electrical Test Kit
Model: NCVT2PKIT
Rating: 5.0 (1 Review)
1 out of 1 (100%) reviewers recommend this product.
Key Features
- Kit contains a non-contact voltage tester and a receptacle tester.
- Dual range NCVT-2P automatically detects 12 to 1000V AC and 70 to 1000V AC.
- NCVT-2P provides non-contact detection of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets, and wires.
- NCVT-2P is lightweight, compact, offers convenient storage, and quick access.
- CAT IV 1000 Volt rating provides enhanced protection.
- Screw-thread battery cap with O-ring provides dust and water ingress protection.
- Receptacle Tester (RT105) is designed to identify wiring problems in standard receptacles.
- Conditions the Receptacle Tester for proper ground, reverse polarity, open hot, and open neutral wiring.
Product Description
The NCVT2PKIT from Klein Tools includes a dual-range, non-contact voltage tester (NCVT-2P) and a receptacle tester (RT105). The NCVT-2P detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, and outlets. It also detects voltage in doorbells, thermostats, low voltage lighting, and irrigation systems, providing both visual and audible signals. The RT105 receptacle tester is designed to identify wiring problems in standard 120V AC grounded outlets.
Specifications
| Specification | Details |
|---|---|
| Product Type | Dual Range Non-Contact Voltage Tester with Receptacle Tester Kit |
| NCVT-2P Voltage Detection | 12 to 1000V AC (Low Voltage), 70 to 1000V AC (Standard Voltage) |
| NCVT-2P Standard | CAT IV 1000V |
| RT105 Application | Detects most common wiring problems in standard 120V AC grounded outlets (open hot, open neutral, open ground, reverse polarity, reversed hot/ground, reversed hot/neutral). |
| NCVT-2P Features | Non-contact voltage detection in cables, cords, circuit breakers, light fixtures, switches, outlets, wires, doorbells, thermostats, low voltage lighting, and irrigation systems. Visual and audible signals. Screw-thread battery cap with O-ring for dust and water ingress protection. |
| NCVT-2P Ingress Protection | IP54 |
| NCVT-2P Drop Protection | 6.6' (2 m) |
| RT105 Drop Protection | 3.3' (1 m) |
| NCVT-2P Material | Polycarbonate |
| NCVT-2P Battery Life | 142 hr |
| NCVT-2P Batteries | 2 x AAA (Required) |
| NCVT-2P Overall Length | 5.8" (14.8 cm) |
| NCVT-2P Overall Height | 1.1" (2.8 cm) |
| NCVT-2P Overall Width | 0.9" (2.2cm) |
| NCVT-2P Weight | 1.7 oz (48 g) |
| NCVT-2P Frequency | 50 - 500 Hz |
| NCVT-2P Pollution Degree | 2 |
| UPC | 092644693274 |
Additional Information
Warranty: Information available.
Warnings
Read, understand, and follow all warnings, cautions, safety information, and instructions in the manual before operating or using the product. Failure to follow instructions could result in death or serious injury. Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected before handling.
Related Items
Reviews
Rating Snapshot
- 5 : 1
- 4 : 0
- 3 : 0
- 2 : 0
- 1 : 0
Average Customer Ratings
Overall: 5.0
Quality of Product: 4.0
Value of Product: 5.0
Customer Review
User: Mf73
Location: Sault Ontario
Review: Always in pocket ready to use. Bought the combo kit because it was on sale and old sniffer was acting up, the dual voltage tester which I believe is better than a single voltage sniffer is great my kit had the digital gfci tester which I love. Lights bright and the features are super cool.
(9 days ago)
Helpful? Yes [0] No [0] Report
