Micropack MP-V01W Wireless Ergonomic Vertical Mouse
User Manual
CAUTIONS
- Do not expose this product to rain or wet conditions.
- Do not disassemble, repair, or modify this product.
- Please store and use this product at room temperature.
- Do not drop, to avoid product damage.
- Unauthorized removal will invalidate the warranty.
- If the battery is not replaced properly, there is an explosion risk, and only the same type or equivalent type of battery can be replaced.
- Batteries must not be exposed to warnings such as sunlight, fire, or similar overheating conditions.
OVERVIEW
Diagram showing the mouse with labeled buttons: Left Button, Right Button, Scroll wheel, DPI Button, Forward Button, Back Button.
FEATURES
- Reduces palm fatigue when used for long periods.
- Features 3 DPI levels: 1000, 1200, and 1600 DPI.
- Includes auto standby and deep-sleeping modes to save power.
- Utilizes RF 2.4G technology with a wireless range of up to 10 meters.
STEP
- Open the mouse battery cover and insert batteries.
- Toggle the bottom switch; the mouse tail light will turn on.
- Insert the receiver into the computer and begin using.
FREQUENTLY ASKED QUESTIONS
| Fault | Solution |
|---|---|
| The tail light is not on. | Replace it with a new battery. |
| The receiver cannot be connected to the mouse. | 1. Try plugging the receiver in again, or insert it into another USB port. 2. Check whether the mouse receiver is confused with other receivers. |
SPECIFICATION
| Attribute | Details |
|---|---|
| Wireless technology | RF 2.4 GHz |
| Wireless range | Approx. 10 meters |
| Sensor | Optical sensor |
| Resolution | 800 - 1200 - 1600 DPI |
| Numbers of buttons | 6 (left key, right key, scroll, channel switching, forward, backward) |
| Battery type | 1 AA battery |
| Receiver | Nano receiver |
| Rating voltage/current | 1.5 V / 15 mA (mouse) 4.35~5.25 V / 25 mA (USB receiver) |
| Dimension | 117.89 x 77.15 x 53.82 mm |
BOX INCLUDES
- Wireless mouse
- USB receiver
- User manual
SYSTEM REQUIREMENT
- USB specification version 1.1, 2.0 or above.
- Supports Windows 10 / 8 / 7 / XP / 2003 / Mac.
Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
