MicroPack MP-V03W Wireless Ergonomic Vertical Mouse

Product Overview

Model: MP-V03W

Type: Wireless Ergonomic Vertical Mouse

Brand: MicroPack

Dimensions: 108.8 x 76.7 x 82.5 ± 0.5 mm

Weight: 128g (approx.)

Cautions

• Do not expose the product to rain or damp conditions.
• Do not disassemble, repair, or modify the product.
• Please store and use the product at room temperature.
• Do not drop, in case the product is damaged.
• Unauthorized removal will void the warranty.
• Only replace batteries of the same type or equivalent type.
• Batteries should not be exposed to sunlight, fire, or similar overheating conditions.

Features

• Ergonomic design
• 3 DPI levels (800-1200-1600 DPI)
• Power-saving
• Works on almost any surface
• Stable 2.4GHz wireless connection

Specifications

• Wireless technology: RF 2.4 GHz
• Wireless range: Approx. 10 meters
• Sensor: Optical sensor
• Resolution: 800-1200-1600 DPI
• Number of buttons: 6 (left click, right click, scroll wheel, DPI switch, forward, backward)
• Battery type: 1 AA battery
• Receiver: USB-A nano receiver + USB-C nano receiver
• Rating voltage/current: 1.5V/15mA (Max)
• Power from USB: 4.35-5.25V/40mA (USB receiver)

Setup Instructions

1. Open the battery cover of the mouse.
2. Take out the USB-A receiver and insert it into the USB-A socket of the computer, or insert the USB-C receiver into the USB-C socket of the notebook.
3. Install 1 AA battery in the battery compartment, ensuring correct polarity (+ and -).
4. Replace the cover and flip the power switch at the bottom to the 'ON' position.
5. To switch receivers: turn off the mouse switch, remove the current receiver, insert the other receiver (USB-A or USB-C), turn on the switch, and the mouse is ready for use.

Diagram Description: The diagram shows the mouse with its battery compartment, the placement of the AA battery, and the USB receivers (USB-A and USB-C). It also illustrates the ON/OFF switch at the bottom of the mouse.

Troubleshooting

1. Failed to connect

• Confirm the USB receiver is correctly connected to the host's USB interface.
• Ensure the USB receiver automatically identifies the host and installs the program.
• Check if the battery is installed correctly (polarity) and has sufficient charge.
• Test connection with a different computer if possible.
• Verify that the USB receiver works in a different USB socket.
• Confirm the power switch is in the 'ON' position.

2. Wake up and others

• The product enters standby state after 60 seconds of inactivity.
• The product enters hibernation after 15 minutes of inactivity.
• To wake the product from hibernation, press any left or right key.

Box Includes

• 1 x Wireless mouse
• 1 x USB-A & USB-C receiver
• 1 x User manual

System Requirements

• USB specification version 1.1, 2.0, or above.
• Support for Windows 10/8/7/XP / Mac operating systems.