INTEX® OWNER'S MANUAL

RECHARGEABLE HANDHELD VACUUM

Model CL1704 MAX. WATER TEMPERATURE 35 °C

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

▲ WARNING

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID PROPERTY DAMAGE OR OTHER INJURY.

SAVE THESE INSTRUCTIONS

PARTS LIST

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

REF. NO. DESCRIPTION QTY. SPARE PART NO.
1 VACUUM BODY WITH NON-REPLACEABLE BATTERY 1 12271A
2 FILTER BAG WITH GASKET 1 12278
3 VACUUM BODY COVER 1 12277
4 LARGE VACUUM BRUSH HEAD 1 12274
5 VACUUM NOZZLE 1 12275
6 VACUUM NOZZLE BRUSH 1 12276
7 MICRO-FILTER BAG 1 12279
8 VACUUM CHARGING USB CABLE 1 12269
9 TELESCOPING ALUMINUM POLE 1 10637A
10 POLE ADAPTOR 1 12270

General:

Charging the Battery:

  1. Connect USB cable to plug charger USB receptacle and plug the charger into the main electrical outlet.
  2. Connect the small end of the USB cable (8) into the vacuum body (1) charging receptacle. See fig 1. The indicator light will turn on.

Installation:

  1. Insert the filter bag with gasket (2) into the vacuum body (1). See fig 2.1.

For vacuuming fine-small particles, insert the micro-filter bag (7) into the filter bag (2) before inserting the filter bag (2) into the vacuum body (1). See fig 2.2.

Install the vacuum body cover (3) onto the vacuum body (1). Turn the cover (3) clockwise to securely lock it to the vacuum body. See fig 3.

Attach the desired cleaning head accessory to the vacuum body cover. See fig 4. Note: The ridge on the vacuum body cover (3) matches the groove on the end of the vacuum brush head (4) or vacuum nozzle (5).

Attach the aluminum pole (9) by squeezing the spring buttons and inserting into handle of the vacuum body (1). Check the buttons “pop” into the holes. Adjust the length of the shaft by unlocking, extending and locking each section accordingly. See fig 5. Optional: The included pole adaptor (10) can be used with other sizes of extension poles.

SAVE THESE INSTRUCTIONS

Operation:

  1. Make sure the USB receptacle is securely covered with the rubber flap first. See fig 6. Slide the switch to “1” first then place the vacuum in the water.

IMPORTANT

The vacuum body will not operate unless it is submerged in water. Water flow from sides of the vacuum body indicates the product is working.

  1. Carefully “sweep” the surface of the spa or pool to remove debris.
  2. Check and empty the filter bag/micro-filter bag regularly during and after each use.
  3. Reverse the above installation steps to remove and empty the filter bag/micro-filter bag. Note: Rinse vacuum body, cover and filter bags with a garden hose before reassembling.

Maintenance and long term storage:

  1. Turn off the vacuum before cleaning, servicing and maintenance. Regularly check all components for sign of damage. Discard and replace damaged components immediately.
  2. Using the installation instructions in reverse, disassemble the vacuum. Clean all the components with water, and make sure all components are thoroughly dry before storage.
  3. Store the product and accessories in a dry, temperature controlled, between 0° – 40°C (32° – 104°F), storage location.
  4. The original packing can be used for storage.

TROUBLE

SOLUTION

VACUUM DOESN'T WORK
  • Charge the product then turn on the unit. Ensure the unit is switched to "1".
  • Keep the vacuum body under the water.
LOW SUCTION
  • Choose the suitable bag for filtering and install the filter bag(s) correctly.
  • Check and empty the filter bag(s) regularly during and after each use.
  • Check for any sand or deposits in the vacuum.
  • Contact Intex Service Center.
CHARGING FAILED
  • Check the plug charger has an output voltage of 5-5.2V ± 0.1, 1A.
  • Connect USB cable to plug charger USB receptacle and plug the charger into the main electrical outlet first, then connect USB cable into the vacuum body charging receptacle.
  • Tighten USB cable, the indicator should be on.

SAVE THESE INSTRUCTIONS

Limited Warranty

Your RECHARGEBALE HANDHELD VACUUM has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies to the RECHARGEBALE HANDHELD VACUUM only.

This limited warranty is in addition to, and not a substitute for, your legal rights and remedies. To the extent that this warranty is inconsistent with any of your legal rights, they take priority. For example, consumer laws across the European Union provide statutory warranty rights in addition to the coverage you receive from this limited warranty: for information on EU-wide consumer laws, please visit the European Consumer Center website at http://ec.europa.eu/consumers/ecc/contact_en/htm.

The provisions of this Limited Warranty apply only to the original purchaser and are not transferable. This Limited Warranty is valid for a period of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with this document, as proof of purchase will be required and must accompany warranty claims or the Limited Warranty will be invalid.

If you find a manufacturing defect in the RECHARGEBALE HANDHELD VACUUM during the warranty period, please contact the appropriate Intex Service Center listed in the separate “Authorized Service Centers" sheet. If the item is returned as directed by the Intex Service Center, the Service Center will inspect the item and determine the validity of the claim. If the item is covered by the provisions of the warranty, the item will be repaired or replaced, with the same or comparable item (at Intex's choice) at no charge to you.

Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your RECHARGEBALE HANDHELD VACUUM, or Intex or its agents' and employees' actions (including the manufacture of the product). If your country does not allow the exclusion or limitation of incidental or consequential damages, this limitation or exclusion does not apply to you.

You should note that this limited warranty does not apply in the following circumstances:

Injury or damage to any property or person is not covered by this warranty.

Read the owner's manual carefully and follow all instructions regarding proper operation and maintenance of your RECHARGEBALE HANDHELD VACUUM. Always inspect your product prior to use. This limited warranty will be void if use instructions are not followed.

SAVE THESE INSTRUCTIONS

Models: CL1704, Handheld Rechargeable Vacuum Cleaner

File Info : application/pdf, 5 Pages, 1.26MB

PDF preview unavailable. Download the PDF instead.

RECHARGEABLE-HANDHELD-VACUUM

References

Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Windows)

Related Documents

Preview Intex Rechargeable Handheld Vacuum CL1704 Owner's Manual
This manual provides instructions for the Intex Rechargeable Handheld Vacuum, Model CL1704. It covers assembly, charging, operation, maintenance, troubleshooting, and warranty information for the pool and spa vacuum.
Preview INTEX CL1704 Rechargeable Handheld Vacuum User Manual
User manual for the INTEX CL1704 rechargeable handheld vacuum cleaner, including operating instructions, maintenance, troubleshooting, and warranty information.
Preview INTEX CL1004 Rechargeable Handheld Vacuum Owner's Manual
This manual provides instructions for the INTEX CL1004 Rechargeable Handheld Vacuum, covering assembly, operation, maintenance, and troubleshooting. Learn how to safely use and care for your pool vacuum.
Preview Intex ZR200 Rechargeable Pool Vacuum CL25081 Owner's Manual
Owner's manual for the Intex ZR200 Rechargeable Pool Vacuum (Model CL25081). Includes instructions for assembly, operation, maintenance, troubleshooting, and limited warranty information.
Preview Intex Electric Pool Heater HT30221-2 Owner's Manual
This owner's manual provides essential safety rules, setup instructions, operating procedures, troubleshooting guide, and warranty information for the Intex HT30221-2 Electric Pool Heater. Learn how to safely install, operate, and maintain your pool heater for optimal performance.
Preview Intex Frame Pool Set Family User Manual - Models 260x160x65cm and Others
Comprehensive user manual for Intex Frame Pool Set Family models, including setup instructions, maintenance guidelines, troubleshooting tips, and warranty information for safe and enjoyable pool use.
Preview Intex Metal Frame Pool Owner's Manual
Comprehensive owner's manual for Intex Metal Frame Pools (8'-24' models), covering safety rules, setup instructions, maintenance, troubleshooting, and warranty information.
Preview Intex Prism Frame Pool Owner's Manual and Safety Guide
Comprehensive owner's manual and safety guide for Intex Prism Frame and Greywood Prism Frame pools, covering setup, maintenance, safety rules, and troubleshooting. Includes parts lists, assembly instructions, and warranty information.