Important Safety Notice
Read carefully before beginning assembly.
- Always use proper tools.
- Follow assembly steps in order; do not skip any.
- Check packing materials for small parts. Contact the retailer for missing parts. Do not use substitute parts.
- Periodically check that all connectors (bolts, screws) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to avoid severe injury if broken. Never handle large pieces of glass or mirrors alone.
- For products with electrical cords, ensure the cord is unplugged before assembly and do not twist the cord during assembly.
- When assembling shelves or entertainment centers, use a step ladder to reach upper shelves; do not stand on lower shelves.
- Do not stand on tables (end tables, coffee tables, dinner tables) as they are not designed to support a person's weight.
- If assembly requires two or more people, do not attempt it alone due to risk of injury.
Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries resulting from failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different from the illustrations.
Parts List
| Part | Quantity | Description |
|---|---|---|
| A | x1 | Main Bench Frame/Seat |
| B | x2 | Support Brackets |
| C | x2 | Side Support Pieces |
| D | x2 | 1/4" x 80mm Bolts |
| E | x8 | 1/4" x 40mm Bolts |
| F | x1 | M4 Allen Wrench |
Assembly Instructions
Assembly requires two or more people. Do not tighten any bolts until all bolts have been started.
Step 1
Attach the two Support Brackets (B) and two Side Support Pieces (C) to the Main Bench Frame/Seat (A). The diagram shows parts B and C being attached to the underside of the main seat frame (A), with the assistance of another person implied.
Step 2
Using one 1/4" x 80mm Bolt (D) and the M4 Allen Wrench (F), secure one Support Bracket (B) to the frame. A close-up view shows the bolt passing through the bracket and into a pre-drilled hole in the frame.
Step 3
Using one 1/4" x 40mm Bolt (E) and the M4 Allen Wrench (F), attach one Side Support Piece (C) to the frame. A close-up view shows the bolt passing through the support piece and into the frame.
Step 4
Attach the assembled frame structure (composed of parts B and C) to the Main Bench Frame/Seat (A) using six 1/4" x 40mm Bolts (E) and the M4 Allen Wrench (F). The diagram shows the frame being attached to the underside of the seat, with bolts inserted from the bottom.
Step 5
Once all parts are assembled and all bolts are started, go back and tighten all bolts securely using the M4 Allen Wrench (F). The final diagram shows the completed bench.
Contact Information: For replacement parts, contact RTAParts@ashleyfurniture.com or visit https://www.ashleyfurniture.parts. For assistance, call 1-844-966-0809.
