Benchcraft B683-92 Assembly Instructions and Safety Guide

Important Safety Notice

Please read the following safety information carefully before beginning assembly.

• Always use the correct tools for assembly.
• Follow the assembly steps in the order provided. Do not skip any steps.
• Carefully check all packing materials for small parts that may have become loose during shipping. If any parts are missing, contact the retailer from which you purchased the product to obtain replacements. Do not use substitute parts.
• Periodically check and tighten all connectors, such as bolts and screws.
• When assembling products with electrical cords (e.g., lamps, motors, power strips), always ensure the cord is unplugged before assembly. Be careful not to twist or pinch the electrical cord during and after assembly. Do not use an extension cord with this product.
• Note: During charging, the device and charger may heat up. This is normal. If the battery becomes excessively hot, charging may stop.
• Keep these instructions for future reference.
• Handle glass or mirrors with extreme caution, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
• If assembly instructions indicate that two or more people are required, do not attempt assembly by yourself, as there is a risk of injury.
• When assembling shelves or entertainment centers, use a step ladder to reach upper shelves; do not stand on lower shelves.
• Do not stand on tables, including end tables, coffee tables, or dinner tables, as they are not designed to support the weight of a person.
• WARNING: Before placing a device on a charging surface, remove all metal objects (such as coins and keys) from the surface and from your mobile phone. Some mobile devices or cases may attract metal objects.

Ashley Furniture Industries, LLC disclaims any liability for damages or injuries that may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

Your unit may appear different from the illustrations shown on this instruction sheet.

Parts and Hardware Identification

The following parts and hardware are included for assembly:

Hardware and parts are located inside the box.

Assembly should be performed by two or more people. Do not tighten any bolts until all bolts have been started.

Assembly Instructions

Step 1: Attaching Components

This step involves connecting main structural components. Four 'C' bolts (5/16" x 3 1/2") are used to secure parts of the cabinet, likely the legs or frame. The diagram illustrates a bolt being inserted into a pre-drilled hole and tightened with the provided Allen wrench (Part F). Ensure all bolts are started before fully tightening them.

Assembly by two or more people is recommended for safety and ease.

Final Installation and Safety Features

Tipping Restraint Installation

! WARNING !

The included tipping restraint is designed to reduce, but not eliminate, the risk of furniture tip-over. Follow the specific instructions provided on the plastic bag for correct installation.

Unit Leveling

Note:

If the unit is placed on an unlevel surface, use the provided levelers. Place a leveler under one foot until the unit is stable and level. Once the unit is level, carefully break off any protruding segments of the leveler.

Customer Support and Replacement Parts

For assistance with assembly or to order replacement parts, please contact Benchcraft:

• Email: RTAParts@ashleyfurniture.com
• Website: www.ashleyfurniture.parts
• Phone: 1-844-966-0809