Meross Smart Plug Quick Installation Guide
This guide provides step-by-step instructions for setting up your Meross Smart Plug.
Getting Started
-
Download the Meross App
Download the Meross app from your device's app store.
[App Store] [Google Play] [Amazon]
-
Plug In the Smart Plug
Plug the Meross Smart Plug into an electrical outlet located near your main Wi-Fi router. Note: Proximity to the Wi-Fi router is only required during the initial setup process. Meross Smart Plugs support only 2.4GHz Wi-Fi networks.
-
Configure the Device
Open the Meross app and follow the on-screen setup wizard to complete the configuration.
-
Final Placement
Once configured, you can move the Meross Smart Plug to your desired outlet. No further configuration is needed.
LED and Button Functions
Button
Press the button to turn the connected device ON or OFF.
Press and hold the button for 5 seconds until the LED turns solid amber to initiate a factory reset.
LED Status Indicators
| LED State | Description |
|---|---|
| Solid amber | Initialization, Reset, or Firmware upgrading mode. |
| Flashing amber and green slowly | Configuration mode. |
| Flashing green rapidly | Wi-Fi connecting mode. |
| Solid green | Successfully connected. The socket is ON. |
| Solid red | No Internet connection. The socket is ON. |
| Off | The socket is OFF, or the Meross Smart Plug is powered off. |
Frequently Asked Questions (FAQ)
At Meross, we strive to ensure your satisfaction. We apologize for any inconvenience during installation or operation and are happy to assist you at support@meross.com.
-
What devices can I control with the Meross Smart Plug?
You can control lights, fans, humidifiers, portable heaters, and any small appliances that comply with the Meross Smart Plug's specifications (up to 10A/13A/16A/16A output for AU/UK/EU/FR versions, respectively).
-
What should I do if the LED is solid red?
A solid red LED indicates no internet connection. Please try the following troubleshooting steps:
- Check your main Wi-Fi router's internet connection.
- Ensure your main Wi-Fi password has not been changed.
- Verify that your Meross Smart Plug is not too far from your main Wi-Fi router.
- Perform a factory reset on the Meross Smart Plug and attempt to add it again.
-
How do I pair my Meross devices with Amazon Alexa or Google Assistant?
Visit the "Account" section, then navigate to the "Amazon Alexa" or "Google Assistant" page within the Meross app for pairing instructions.
