GODOX Photo Equipment Co.,Ltd.Declaration of Conformity-GODOX Photo Equipment Co.,Ltd.
User Guide for GODOX models including: C30Bi LED Litemons Bi-Color LED Video Light Panel, C30Bi, LED Litemons Bi-Color LED Video Light Panel, Color LED Video Light Panel, Video Light Panel, Light Panel
邮箱：godox@godox. com. GODOX Photo Equipment Co., Ltd. Add.: Building 2 ... The newly launched C30Bi is a delicate pocket-size LED light equipped with.
File Info : application/pdf, 2 Pages, 1.92MB
DocumentDocument LED Litemons Bi-Color LED Video Light Panel
Instruction Manual
V1.2
0.5m
1m
2m
lux
7087
1800
451
2800K
fc
659
168
42
lux
2295
562
134
fc
214
52
13
lux
7411
1900
464
fc
688
177
43
3200K
lux
2408
588
140
fc
223
55
13
lux
7868
2000
493
fc
730
186
46
4300K
lux
2512
613
145
fc
233
57
14
lux
8025
2050
502
fc
745
190
47
4800K
lux
2536
625
149
fc
235
58
14
lux
8610
2200
540
fc
800
203
50
5600K
lux
2700
663
157
fc
251
62
15
lux
8805
2250
550
fc
817
209
51
6500K
lux
2740
672
158
fc
255
63
15
100
5
1. 2.
3.
4. LED
5.
6. 7. -10 ~+40 8. 9. 10. 11. 12. 13.
1
C30Bi DC7.2V,3400mAh,24.48Wh
USB-C 5V 3A9V 3A12V 3A
0%-100%
2800K-6500K
2
CRI TLCI
45 100% 276 50% 94 96
-10 40 133mm*78mm*26mm 248g
6
14.
15.
16.
17.
18.
1
19. ROHSCE FCC 20.
21. -- 22. 23.
1. 2.1/4 3. USB-C 4. 5.
LED C30Bi
LED
Vlog
6.
7
7.
8.
6
9.
2 3 4 5
9 8
2
3
( ) ( )
:
12
0755-29609320-8062
× 1
× 1
× 1
×1
1/4
USB-C
0%-25% 26%-50% 51%-75% 76%-100%
OFF( ) :0%-100% ,
:2800K-6500K , : , , ( )
4
Wechat Official Account
2 0755-296093208062 0755-25723423 godox@godox. com
GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com
www.godox.com Made in China | 705-C30BY0-03
Safety Instructions and Attentions
First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:
1. Before use, please read and understand these instructions and attentions. Professional lighting is prohibited for children. When children are near, parents or
2. accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.
3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.
4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.
5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.
7. This product is only suitable for use in -10 to 40 operating environment and normal humidity environment.
8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use. During using, if the casing of this product is broken due to being dropped, squeezed
9. or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.
10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.
11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel.
7
Illuminance Data
CCT Testing Condition Unit
0.5m
1m
2m
lux
7087
1800
451
Bare Light
fc
659
168
42
2800K
lux
2295
562
134
With Diffuser
fc
214
52
13
lux
7411
1900
464
Bare Light
fc
688
177
43
3200K
lux
2408
588
140
With Diffuser
fc
223
55
13
lux
7868
2000
493
Bare Light
fc
730
186
46
4300K
lux
2512
613
145
With Diffuser
fc
233
57
14
lux
8025
2050
502
Bare Light
fc
745
190
47
4800K
lux
2536
625
149
With Diffuser
fc
235
58
14
lux
8610
2200
540
Bare Light
fc
800
203
50
5600K
lux
2700
663
157
With Diffuser
fc
251
62
15
lux
8805
2250
550
Bare Light
fc
817
209
51
6500K
lux
2740
672
158
With Diffuser
fc
255
63
15
Note: All the data are average values instead of absolute values.All the above tests are based on the condition of 100% brightness.
12
Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory. 12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet. 13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids.The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents. 14. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel. 15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place. 16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline. 17. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury. 18. Be sure to clean the lamp bead glass frequently and keep it clean, as mosquito carcasses or dark organic stains may cause the glass to burst. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment. 19. This product complies with ROHS, CE and FCC certification, please refer to the relevant national standards for use and operation. 20. The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction. 21. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty. 22. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance. 23. Machine failures caused by non-standard operation are not covered by the warranty.
Do not stare at the operating light source
8
Technical Data
Model Lithium Battery USB-C Port Input Brightness Range CCT Range Charging Time
Working Time
CRI TLCI Working Environment Temperature Bare Light Dimension Bare Light Net Weight
C30Bi DC7.2V,3400mAh,24.48Wh 5V 3A9V 3A12V 3A 0%-100% 2800K-6500K 2h 45min (100% brightness output) 276min (50% brightness output) Average 94 Average 96
-10 40
5.24" *3.07" *1.02" 248g
Specifications and data may subject to changes without notice.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
13
Foreword
Thank you for purchasing The newly launched C30Bi is a delicate pocket-size LED light equipped with dual dials to adjust brightness and CCT respectively, quite suitable for comic exhibition shooting, camera filling light, food exploration, Vlog filling light and etc.
Name of Parts
1. Light Beads
1
2. 1/4" Screw Hole
3. USB-C Port
4. Brightness Adjust Dial
5. CCT Adjust Dial
2 3
4 5
6. Battery Level Indicator
7. Battery Level Indicator
8. Battery Level Indicator
9
9. Battery Level Indicator 8
7
6
9
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
Declaration of Conformity
GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive GPSR(EU)2023/988,2014/30/EU. They are allowed to be used in all EU member states. For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/
14
What's Inside
Light Body × 1
Charging Cord × 1
Diffuser × 1
Instruction Manual × 1
Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
Mount onto the Bracket
The 1/4" screw hole design allows for quick mounting to the optional bracket by rotating clockwise to lock the screw after alignment.
Charging
Connect USB-C port of the light body to the power source with the attached charging cord to charge the light.
Battery Level Indicators
here are four battery level indicators , through which you can check the remaining battery level, when the device is in low battery, please charge it in time. Indicator lights up indicates that the current battery level is 0%-25%. Indicator lights up indicates that the current battery level is 26%-50%. Indicator lights up indicates that the current battery level is 51%-75%. Indicator lights up indicates that the current battery level is 76%-100%.
10
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information Model
Product Code Number
Customer Name Information
Address
Name
Seller
Contact Number
Information
Address
Date of Sale
Note
Contact Number
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card,
Brightness Adjust Dial
OFF (turn off) Brightness Range: 0%-100% Rotate clockwise to turn on the light source and increase the brightness, rotate counterclockwise to decrease the brightness and turn off the light source.
CCT Adjust Dial
CCT Range: 2800K-6500K Rotate clockwise to increase the CCT, rotate counterclockwise to decrease the CCT. Note: Rotate the dial according to the markings on it, the marking corresponding to the red dot indicates the current brightness and CCT ranges (There are positive and negative tolerances for CCT range).
11
we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Type
Name
MaintenancePeriod(month) Warranty Service Type
Parts Circuit board
12
Customer sends the product to designated site
Lamp body,
Other Items
lamp cover, locking device,
No
package, etc.
Without warranty
Godox After-sale Service Call +86-755-29609320(8062)