Manuals+

DGLYJJ-V1

TV-stand

Notice

1. Follow the installation instructions. Please confirm all accessories are preset before installation.

2. Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces are assembled.

3. If you encounter any problems during installation, please contact customer service.

Parts and Hardware

Components

  1. Part 1: Base Panel
  2. Part 2: Base Panel
  3. Part 3: Back Panel
  4. Part 4: Side Panel
  5. Part 5: Side Panel
  6. Part 6: Support Panel
  7. Part 7: Shelf Panel
  8. Part 8: Shelf Panel
  9. Part 9: Top Panel
  10. Part 10: Back Panel
  11. Part 11: Door (Left)
  12. Part 12: Door (Right)
  13. Part 13: Support Bar
  14. Part 14: Support Bar
  15. Part 15: Support Bar
  16. Part 16: Support Bar
  17. Part 17: Support Bar
  18. Part 18: Door Hinges (x2)
  19. Part 19: Bracket
  20. Part 20: Power Strip Unit (120V/12A, 5V/2A, 1.5M cable)

Hardware

  • A: M6x35 screws (20 PCS)
  • B: Ø15x12 dowels (20 PCS)
  • C: M5x40 screws (24 PCS)
  • D: M3.5x12 screws (10 PCS)
  • E: Ø8x40 cam locks (8 PCS)
  • F: M6x28 screws (8 PCS)
  • G: M4x96 screws (2 PCS)
  • H: M4x18 screws (4 PCS)
  • I: Ø5 screws (4 PCS)
  • J: Cam lock bolts (2 SETS)
  • K: Cam lock nuts (4 PCS)
  • L: Allen wrench (1 PCS)
  • 4#: Screwdriver (1 PCS)

Cam Lock Fastening System

This Cam Lock Fastening System will be used throughout the assembly process.

Visual description: A diagram illustrates the Cam Lock system. Step 1 shows a cam lock bolt being screwed into a panel. Step 2 shows a cam lock being inserted into a corresponding hole on another panel. Step 3 shows the two panels being brought together. Step 4 shows the cam lock being turned with a screwdriver to secure the connection.

Assembly Steps

Step 1

Attach part 6 (Support Panel) to part 4 (Side Panel) using screws C (M5x40). Arrows indicate the direction of attachment.

Visual description: Part 6 is shown positioned against the inner face of part 4. Four screw holes on part 6 align with corresponding holes on part 4. Four screws (C) are depicted being inserted through part 4 into part 6. Arrows indicate the direction of insertion.

Step 2

Attach part 6 (Support Panel) to part 5 (Side Panel) using screws A (M6x35). Arrows indicate the direction of attachment.

Visual description: Part 6 is shown positioned against the inner face of part 5. Four screw holes on part 6 align with corresponding holes on part 5. Four screws (A) are depicted being inserted through part 5 into part 6. Arrows indicate the direction of insertion.

Step 3

Insert dowels B (Ø15x12) into parts 3 (Back Panel) and 5 (Side Panel). Insert cam locks E (Ø8x40) into part 4 (Side Panel). Connect part 3 to part 4 and part 5 to part 4. Secure connections using cam locks E. Arrows indicate insertion and tightening.

Visual description: Dowels (B) are shown inserted into pre-drilled holes along the edges of parts 3 and 5. Cam locks (E) are shown inserted into larger holes on the face of part 4. Part 3 is brought to align with the edge of part 4, and part 5 is brought to align with the opposite edge of part 4. Arrows indicate the alignment and the rotation of cam locks (E) to secure the panels. A measurement of '10 mm' is indicated for the insertion depth of the cam locks.

Step 4

Attach part 3 (Back Panel) and part 9 (Top Panel) to part 4 (Side Panel) using screws C (M5x40). Attach part 10 (Back Panel) to part 4 using screws C.

Visual description: Part 3 is shown attached to the rear edge of part 4. Part 9 is positioned on top of part 4. Part 10 is shown attached to the rear edge of part 4, adjacent to part 3. Multiple screws (C) are depicted being inserted through part 4 into the edges of parts 3, 9, and 10. Arrows indicate insertion points.

Step 5

Attach part 3 (Back Panel) and part 8 (Shelf Panel) to part 4 (Side Panel) using screws C (M5x40).

Visual description: Part 3 is shown attached to the rear edge of part 4. Part 8 (Shelf Panel) is shown positioned horizontally, attached to the inner face of part 4. Multiple screws (C) are depicted being inserted through part 4 into the edges of parts 3 and 8. Arrows indicate insertion points.

Step 6

Assemble the main frame. Attach parts 2 (Base Panel), 3 (Back Panel), 4 (Side Panel), and 16 (Support Bar) using screws A (M6x35) and dowels B (Ø15x12). Attach part 17 (Support Bar) using screws C (M5x40).

Visual description: The partially assembled structure is shown. Part 2 (Base Panel) is attached to the bottom of the unit. Part 16 (Support Bar) is attached to the front bottom edge. Part 17 (Support Bar) is attached to the back bottom edge. Screws (A) and dowels (B) are used for connections involving parts 2, 3, 4, and 16. Screws (C) are used for attaching part 17. Arrows indicate the placement and connection points.

Step 7

Attach parts 13 (Support Bar) and 14 (Support Bar) to the structure using screws D (M3.5x12) and dowels B (Ø15x12). Attach part 19 (Bracket) using screws A (M6x35).

Visual description: Parts 13 and 14 (Support Bars) are shown attached to the outer sides of the main structure. Screws (D) and dowels (B) are used for these attachments. Part 19 (Bracket) is shown attached to the outer face of part 5 (Side Panel). Screws (A) are used for this attachment. Arrows indicate placement.

Step 8

Attach part 5 (Side Panel) to the main structure using screws C (M5x40) and F (M6x28). Attach part 18 (Door Hinges) to part 5.

Visual description: Part 5 (Side Panel) is shown being attached to the right side of the main assembled frame. Screws (C) and (F) are used for this attachment. Two hinges (18) are depicted being attached to the inner face of part 5, aligned with pre-drilled holes. Arrows indicate the direction of attachment.

Step 9

Attach part 1 (Base Panel) and part 4 (Side Panel) to the structure using screws A (M6x35), dowels B (Ø15x12), and cam locks E (Ø8x40). Attach part 18 (Door Hinges) to part 3 (Back Panel).

Visual description: Part 1 (Base Panel) is shown attached to the bottom front of the unit. Part 4 (Side Panel) is shown attached to the left side of the unit. Screws (A), dowels (B), and cam locks (E) are used for these connections. Two hinges (18) are depicted being attached to the inner face of part 3 (Back Panel), aligned with pre-drilled holes. Arrows indicate placement.

Step 10

Insert shelf panel 7 (Shelf Panel) into the unit. Secure using screws I (Ø5).

Visual description: Shelf panel 7 is shown being slid horizontally into the unit, between the side panels. Screws (I) are depicted being inserted through the side panels (parts 4 and 5) into the edges of shelf panel 7. Arrows indicate insertion.

Step 11

Attach doors 11 (Left Door) and 12 (Right Door) to the hinges (18) on the side panels. Use hardware G (M4x96) and H (M4x18). Attach door handles (part of doors 11 and 12) using hardware J (Cam lock bolts) and K (Cam lock nuts).

Visual description: Doors 11 and 12 are shown being attached to the pre-mounted hinges (18) on the side panels (parts 3 and 5). Screws (G and H) are used for attaching the doors to the hinges. Close-up views show door handles being attached to the doors using cam lock bolts (J) and cam lock nuts (K).

Step 12

Secure the TV stand to the wall using anti-tip accessories (Part L). Use screws D (M3.5x12) to attach the bracket to the unit and then secure to the wall.

Visual description: The assembled TV stand is shown positioned against a wall. An anti-tip strap (labeled L) is depicted attached to the top rear of the unit. The other end of the strap is shown being secured to the wall with screws. A warning symbol (triangle with exclamation mark) is displayed. A close-up view shows screws (D) being used to attach a bracket to the unit, which then connects to the strap.

Important Safety Information

Anti-Tip Warning

Attention: For safety and stability, we suggest you have to secure the anti-tip accessories to the wall to prevent tipping, injury, and property damage.

Visual description: The assembled TV stand is shown positioned against a wall. An anti-tip strap (labeled L) is shown attached to the top rear of the unit and then secured to the wall with screws. Multiple wall mounting points are indicated.

PDF preview unavailable. Download the PDF instead.

YHFTTS-6008 Installation Guide 1 pdfFactory Pro 3.52 (Windows NT 10.00 x64 Chinese (Simplified))

Related Documents

Preview YITAHOME GZDW-V1 TV Stand Assembly Instructions and Parts Guide
Detailed assembly instructions for the YITAHOME GZDW-V1 TV Stand (FTLFTS-6014, FTLFTS-6015, FTLFTS-0019). This guide includes a comprehensive parts list, hardware identification, and step-by-step instructions for assembling your media console.
Preview YITAHOME DGHN-V2 TV Stand Assembly Instructions
Detailed assembly instructions for the YITAHOME DGHN-V2 TV Stand, including a parts list, step-by-step guidance, and contact information. Model numbers: FTLFTS-0002, FTLFTS-0006, FTLFTS-6002.
Preview YITAHOME GZPFK-V1 TV Stand Assembly Instructions
Step-by-step assembly guide for the YITAHOME GZPFK-V1 TV Stand, including a detailed parts list, hardware identification, and instructions for models FTLFTS-6004 and FTLFTS-6024. Learn how to assemble your entertainment center with clear textual descriptions of each step.
Preview YITAHOME DGHX-V1 TV Stand Assembly Instructions
Detailed assembly instructions for the YITAHOME DGHX-V1 TV Stand, including a parts list and step-by-step guidance for putting together this farmhouse-style media console.
Preview YITAHOME DGYJH-V2 TV Stand Assembly Instructions
Comprehensive assembly guide for the YITAHOME DGYJH-V2 TV Stand, featuring a detailed parts list and step-by-step instructions with textual descriptions of diagrams for easy setup.
Preview Yitahome FTLFTS-0008 FTLFTS-6007 DGYX-V1 TV Stand Installation Guide
Step-by-step installation guide for the Yitahome FTLFTS-0008 and FTLFTS-6007 DGYX-V1 farmhouse TV stand. Includes a detailed parts list and assembly instructions for easy setup.
Preview Yitahome TV Stand Media Console Installation Guide
Step-by-step installation guide for the Yitahome TV Stand Media Console, including parts list, assembly instructions, and safety warnings.
Preview Yitahome FTLFTS-6131 TV Stand Assembly Instructions
Detailed assembly instructions for the Yitahome FTLFTS-6131, FTLFTS-6137, FTLFTS-6138 TV Stand/Sideboard Cabinet. Includes a comprehensive parts list and step-by-step guidance for proper assembly.