Aqara Smart Plug
Quick Start Guide
Introduction
The Aqara Smart Plug is designed to control the power supply for home appliances. It enables remote control via the Aqara Home app and supports timing functions. When used with other Aqara smart accessories and a compatible hub, it enhances your smart home experience.
This product is intended for indoor use only.
Product Overview
Aqara Smart Plug turns on or off the power supply for home appliances, with a Hub to achieve functions such as remote control via app, and timing control. Together with other smart accessories, it provides you an interesting smart home experience.
This device requires a compatible Zigbee 3.0 hub.
To work with Aqara, a specific hub is required.
Visit www.aqara.com/support for more details.
Indicator Light Description
| Indicator Light | Status Description |
|---|---|
| Blue light blinks quickly | Zigbee network is connecting |
| Blue light blinks | Zigbee network works properly |
| Blue light keeps on | High temperature alarm |
| Red light blinks slowly | Zigbee network is not connected |
Specifications
| Parameter | Value |
|---|---|
| Model | SP-EU C01 |
| Dimensions | Φ62 x 77.5 mm (Φ2.44 x 3.05 in.) |
| Wireless Protocol | Zigbee 3.0 |
| Electrical Rating | 250 V AC, 50/60 Hz, 10 A, MAX. 2300 W |
| Operating Temperature | 0 – 35°C (32°F – 95°F) |
| Service Humidity | 0 – 95% RH, no condensation |
| Maximum Transmitting Power | 10.5 dBm |
| Working Frequency | 2405 MHz–2480 MHz |
| Online Customer Service | www.aqara.com/support |
| Email Support | support@aqara.com |
| Manufacturer | Lumi United Technology Co., Ltd. |
| Address | 8th Floor, Jinqiao Wisdom Valley, No.1 Tangling Road, Luxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China. |
Warnings
- Do not cover the device when it is working.
- The device is voltage-free only when it is removed from the power outlet.
- Do not connect devices in series.
- Do not use in damp or wet areas.
- This product is for indoor use only.
Setup Instructions
- Connect the Smart Plug to a power outlet. A single blue blink of the indicator light signifies correct power supply.
- Ensure your Aqara hub is set up and connected to the Aqara Home app.
- Open the Aqara Home app, navigate to the Home screen, tap the "+" icon in the top right corner.
- Select "Add Device (Accessory)", then choose "Smart Plug" and follow the on-screen instructions to add it.
- If the connection fails, move the Smart Plug closer to the hub and try again.
- To reset the Smart Plug and reconnect to the hub, press and hold the button for 5 seconds.
Support
For further assistance, please visit our support website or contact us via email:
- Online Customer Service: www.aqara.com/support
- Email Support: support@aqara.com
