FSP0XX-DF(W)AN3 Series
Features
- Meets IEC 62368-1 & IEC 60950-1
- Meets Energy Efficiency DOE Level VI
- Meets Code of Conduct Version 5 Tier 2
- High Reliability
- EMC Standard: EN55032/ EN55024 Class B
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approval
Approvals include CULUS, TÜV Rheinland, and compliance with FCC Standards. Suitable for Home or Office Use.
Description
This product is a 30~50 watt AC to DC adapter designed for Consumer Electronic Systems with small wattage demands. It operates at 90 to 264 VAC input voltage and meets CISPR32 EN55032 CLASS B, EN55024, and FCC PART 15B Class B emission limits. It is designed for ITE (Information Technology Equipment) applications.
Input Specifications
| Parameter | Value |
|---|---|
| Input voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input current | ≤ 1.2A (at 100Vac, 240Vac / full load) |
| No load power consumption | ≤ 0.075W (at 115Vac, 230Vac) |
| Touch current | ≤ 0.25mA (at 264Vac / 50Hz) |
Output Specifications
| Parameter | Description |
|---|---|
| Output voltage/current | See rating chart |
| Total output power | See rating chart |
| Over voltage protection | Adapter enters shutdown mode if output voltage exceeds 63 volts (AC reset required for recovery). |
| Short circuit & Over current protection | Adapter shuts down and enters auto-recovery mode upon internal or external fault. |
| Over temperature protection | Adapter enters shutdown mode during abnormal thermal rise (AC reset required for recovery). |
| Brown-out protection | Set at 50Vac~60Vac |
Environmental Specifications
| Parameter | Value |
|---|---|
| Working Temperature | 0~70°C (de-rating above 40°C) |
| Storage Temperature | -20~+80°C |
| Working Humidity | 20~80% RH (non-condensing) |
| Storage Humidity | 10~90% RH (non-condensing) |
Input Specifications (Performance)
| Parameter | Value |
|---|---|
| Efficiency | See rating chart. |
| Power turn-on time | ≤ 3 seconds (at 100Vac / full load, output voltage regulation) |
| Hold-up time | ≥ 8ms (at 100Vac or 240Vac / full load, output voltage regulation) |
| Inrush current | Less than rating of adapter critical components (rectifiers, fuse surge, current limiting device) at 100Vac, 240Vac / full load. |
| Operating altitude | 5000 meters above sea level |
| Withstand voltage | 4242V (Between AC input and secondary applied DC, 1 minute test, < 10mA cut-off current) |
| MTBF | ≥ 300,000 hours (at 100Vac, 240Vac / full load, 25°C, standard SR332) |
EMC Performance
| Standard | Performance |
|---|---|
| EN55032 | Class B conducted, Class B radiated |
| FCC | Class B conducted, Class B radiated |
| VCCI | Class B conducted, Class B radiated |
| EN61000-3-2 | Meets Class D |
| EN61000-3-3 | Meets regulation |
| EN61000-4-2 (ESD) | Air discharge: ±8 KV, Contact discharge: ±4KV, meets criterion A |
| EN61000-4-3 (Radiated Immunity) | 80~1000 MHz, 3V/m, 80% AM (1kHz), meets criterion A |
| EN61000-4-4 (EFT) | Impulse: ±1kV applied to L,N, meets criterion A |
| EN61000-4-5 (Surge) | ±1kV applied to differential mode, ±2kV applied to common mode, meets criterion A |
| EN61000-4-6 (Conducted Immunity) | 0.15~80 MHz, 3Vrms, 80% AM (1kHz), meets criterion A |
| EN61000-4-8 (Magnetic Field) | 50 Hz or 60Hz, 1A/m, meets criterion A |
| EN61000-4-11 (Voltage Dips/Interruptions) | Voltage Dips: >95% reduction for 0.5 period, meets criterion B; 30% reduction for 25 period, meets criterion C. Voltage Interruptions: >95% reduction for 250 period, meets criterion C. |
Power De-rating
De-rating applies at different load percentages based on temperature: 100% load at 0-40°C, 85% load at 50°C, 70% load at 60°C, 55% load at 70°C (for 100Vac or 240Vac input). De-rating should be less than the rating of adapter critical components, following FSP specifications.
Derating Curves
Input Voltage Derating Curve: This graph illustrates the relationship between input voltage (Vac) on the x-axis and the percentage of output power (%) on the y-axis. The curve shows that output power is maintained at 100% from approximately 90 Vac up to 264 Vac.
Output Power Derating Curve: This graph shows the percentage of maximum load (% Max Load) on the y-axis against temperature (°C) on the x-axis. The curve indicates that the adapter operates at 100% of its maximum load up to 40°C, and then the output power is de-rated as the temperature increases, reaching approximately 55% of maximum load at 70°C.
Output Voltage/Current Rating Chart
| Model | Output Voltage | Output Current | AC Inlet | Efficiency (DOE Level VI) | Efficiency (CoC V5 Tier 2) |
|---|---|---|---|---|---|
| FSP030-DFAN3 | 48V | 0.625A | C14 | ≥86.95% | ≥87.70% |
| FSP030-DWAN3 | 54V | 0.56A | C14 | ≥86.95% | ≥87.70% |
| FSP040-DFAN3 | 48V | 0.83A | C14 | ≥87.59% | ≥88.59% |
| FSP040-DWAN3 | 54V | 0.74A | C14 | ≥87.59% | ≥88.59% |
| FSP050-DFAN3 | 48V | 1.042A | C14 | ≥88% | ≥89.0% |
| FSP050-DWAN3 | 54V | 0.93A | C14 | ≥88.0% | ≥88.59% |
Mechanical Specifications
The mechanical specifications detail the physical dimensions and layout of the adapter. Key dimensions include:
- Overall length: approximately 120.0 ± 20.0 mm.
- Width: approximately 50.0 ± 0.25 mm.
- Height: approximately 30.0 ± 5.0 mm plus 29.6 ± 0.5 mm.
- Cable tie: CABLE TIE WIRE PET PLATED is used for cable management.
- Case color: BLACK.
The diagram shows the adapter unit with various dimensions indicated, including the main body, cable lengths, and connector placement. It also shows a specific wire number (2468, 22AWG) and serial/part numbers.
Connector Specifications
The connector specifications detail the input and output connectors. The input connector appears to be a standard AC inlet (e.g., C14 as per the rating chart). The output connector is shown with specific pin configurations (labeled 'a' and 'b', with '+' and '-' markings) and wire details.
- Wire details: WIRE NO: 2468, GAUGE: 22AWG.
- The diagram shows a circular connector with pin assignments and a cable tie.
- Specific dimensions are provided for connector parts and cable lengths.
The diagram illustrates the connector interface, including pinouts and cable management details. It specifies wire gauge and type, and shows dimensions for various parts of the connector assembly.
