Finder 22.32 Modular Contactor
25 A, AC/DC Silent Coil
General Specifications
| Feature | Specification |
|---|---|
| Model | 22.32 |
| Type | Modular Contactor |
| Current Rating | 25 A (440 V AC, EN 61095) |
| Coil Voltage | Universal (12-24-48-60-120-230)V AC (50/60 Hz) / DC |
| Coil Consumption | 2 VA / 2.2 W |
| AC1/AC-7a Rating | 250 V, 25 A |
| AC3/AC-7b Rating | 250 V, 10 A |
| AC5a Rating | 250 V, 15 A |
| AC15 Rating | 230 V AC, 6 A, 700 VA |
| DC1 Rating | (25 A / 5 A / 1 A) at (30 V / 110 V / 220 V) |
| CFL-LED Rating | 100 W (200 W for ...x4x0 models) |
| Power Rating (AC1) | 6250 VA |
| Power Rating (AC3) | 1800 VA |
| Power Rating (M) | 1 kW (230 V AC) |
| Power Rating (DC1) | 800 W (2000 W for ...x4x0 models) at 200 V |
| Power Rating (DC1) | 300 W (800 W for ...x4x0 models) at 110 V |
| Power Rating (DC1) | 100 W (200 W for ...x4x0 models) at 30 V |
| Operating Temperature | -25...+50 °C |
| IP Rating | IP20 |
| Coil Type | AC/DC silent coil with varistor protection |
Diagrams and Views
1. Connection Diagram
Schematic showing electrical connections for the modular contactor. Terminals are labeled A1, A2 for coil supply, and 1, 2, 3, 4 for load switching. A fuse symbol is depicted in the circuit.
2. Outline Drawings
Physical dimensions of the 22.32 unit. Shows overall width (W), height (H), and length (L) with specific measurements indicated.
3. Front View
Depicts the front panel of the 22.32 contactor. Features include:
- A three-position manual selector switch labeled "ON", "AUTO", "OFF".
- ON position: Contacts are latched in the operated state; mechanical indicator is visible; LED is not illuminated.
- AUTO position: Contact state, mechanical indicator, and LED follow the coil supply voltage.
- OFF position: Coil is de-energized regardless of A1-A2 supply; contacts remain non-operated; mechanical indicator is not visible; LED is not illuminated.
- A mechanical indicator window.
- An LED indicator.
4. Accessories
Illustrates the attachment of auxiliary contact modules (022.33 or 022.35) to the main 22.32 contactor. The 022.33 module provides 2 Normally Open (NO) contacts. The 022.35 module provides 1 Normally Open (NO) and 1 Normally Closed (NC) contact. These modules offer "Quick Assembly". Note: Auxiliary modules cannot be fitted to 22.32.0.xxx.x4x0 (2 NC versions).
Other Data and Recommendations
It is recommended to maintain an air gap of 9 mm between adjacent relays for installations and operating conditions near the limit (e.g., ambient temperature > 40°C, coil continuously energized, or all contacts loaded with current > 20 A).
Compliance and Listing
UL Listing Information
UL Listed
General Conditions:
- Open Type Device - Pollution degree 2 Installation Environment
- Maximum Surrounding Air Temperature: 50°C
- Minimum distance among modular contactors: 9 mm
- Field Wiring Terminals: Use 60/75°C copper conductor only. Wire ranges: No. 10-12-18-24 AWG, Solid only. Terminal tightening torque: 7.0 lb.in. (0.8 Nm).
- Suitable for use on a circuit capable of delivering not more than 5000 ARMS Symmetrical, 240 V ac, when protected by Listed Cartridge Fuses, rated K5 Class (No Current Limiting, Non-Time Delay, max 600 Vac, 30 A, 50 kA A.I.C.) or RK5 Class (Current Limiting, Time Delay, max 600 Vac, 15 A, 50 kA A.I.C.) or equivalent.
- For use in a circuit protected by Type 1 or Type 2 Surge Protective Devices with "Max Voltage Protection" rating of 3.7 kVpk and "Minimum Nominal Discharge Current" of 5 kA (at 6 kV).
