The Installation Details for Y70 PC Case Monitor
Installation Steps
Firstly, remove the screws from the upside of the monitor. [Image: Hands removing screws from the top of the monitor, with 'UP' and 'DOWN' indicators.]
Remove the side large glass panel of the HYTE Y70 PC case. [Image: Side glass panel removal from HYTE Y70 PC case.]
Remove the screws on the glass, making sure the monitor can be inserted properly. Please note: Do not remove the glass. [Image: Screws removed from glass panel; monitor positioning inset.]
Align the card slot and insert the downside of the monitor. Place the monitor panel against the inside of the glass. [Image: Monitor insertion into PC case, aligned with card slot, panel against glass.]
Screw the upside of the monitor with the glass, then fix the glass to the PC case. [Image: Screws securing monitor and glass to PC case.]
Q&A
Q: The bracket of Monitor can't match the Y70 PC case !
A: The monitor is designed for the HYTE Y70 PC case. Please ensure the front glass is not removed. Most importantly, insert the monitor, then place the monitor panel against the inside of the glass, and screw the upside of the monitor with the glass.
Q: The touch function can't work at all!
A: The touch function can be enabled after connecting the provided cables correctly. Connect the Mini HDMI to HDMI signal cable for video signal, and then connect the USB C to USB cable to the USB C port for touch and power functionality. This ensures signal, touch, and power are all working. [Diagram: Illustrating connection of Mini HDMI to HDMI and USB-C to USB-C cables for signal, touch, and power. Shows a laptop displaying system stats (RAM, CPU, temperature, time) connected to the monitor.]
Q: Does this monitor support HYTE Nexus software?
A: No, this monitor does not support HYTE Nexus software. To monitor system data, users can download AIDA64 or wallpaper engine.
