HYTE Y60 ATX PC Case

Package Contents

• Y60 ATX Case
• Instructions
• PC Headset Adapter
• Accessory Box
  • (A) Motherboard Screws (M3)
  • (B) HDD Screws (6-32)
  • (C) PSU Screws (6-32)
  • (D) Standoff socket
  • Zip Ties

Assembly Instructions

Diagram showing the main components of the HYTE Y60 ATX case laid out, with dimensions indicated for various parts like radiators (up to 360mm) and fans (120mm/240mm/360mm). Dimensions for GPU length (up to 235mm), CPU cooler height (up to 160mm), and PSU length (up to 140mm/280mm) are also shown. Another dimension shown is up to 375mm(L)/75mm(H), likely referring to specific mounting points or clearances.

Illustrations depicting the initial steps of case assembly. This includes attaching the bottom panel, side panels, and front panel. Arrows indicate the direction of assembly and component placement. The diagram shows the case structure evolving through several steps.

This diagram focuses on the internal layout and connectivity. It illustrates front panel I/O ports: Combo Audio, USB 3.2 Gen 1, USB 3.2 Gen 2 Type C, and Power button/indicator. It also shows internal mounting points for motherboard, storage drives, and power supply, and the placement of fans and radiators within the chassis.

This shows the internal structure and component installation. It depicts the motherboard tray, the power supply unit (PSU) shroud, and cable management channels and tie-down points, illustrating the general flow of component installation within the case.

This illustrates the installation of the tempered glass panels and structural elements. It shows how the glass panels are attached and secured. A warning is provided: 'Do not put weight on corner when glass is removed. Replace glass when transporting.' This warning is critical for handling the case.

This section shows the final assembly stages and overall dimensions. It reiterates radiator and fan support sizes (e.g., 360mm max, 280mm max). It shows the completed case structure from different angles. Dimensions 280mm and 240mm are indicated, likely referring to overall case dimensions or specific component clearances.

Specifications and Compatibility

• Radiator Support: Up to 360mm (front/bottom), 120mm/240mm/360mm (side)
• GPU Length: Up to 235mm
• CPU Cooler Height: Up to 160mm
• PSU Length: Up to 140mm/280mm
• Case Dimensions: Approximately 280mm and 240mm (specific overall dimensions not detailed in diagrams)

Warranty Information

Warranty Length for Parts

Y60 Computer Case - 3 Years

HYTE Limited Warranty

This product is covered by a limited warranty. Please visit HYTE.com to obtain a full copy of the written warranty or contact us using one of the methods below.