Flycam Flowline Master with Pro Vest (FLCM-FLN-MSTR-03)

Assembly Manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

Flowline Master with Pro Vest

Bag Packing

Flycam Flowline Master Components

Support Bar: The main vertical support for the system.

Camera Hook: Attaches to the camera for suspension.

Balance Knob Adjustment: Used to adjust the balance of the camera setup.

Accessory Bag: For storing accessories.

Side Support Adjustment: Allows for adjustment of the side support fitment.

Release Lever: Used for releasing the camera or system.

Flycam Flowline Master Setup

Note: It is recommended to attach a minimum weight of 4kg / 9lb for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.

Note: Using Placid (FLCM-FLN-PLA) or Edge V1 (FLCM-EDGE-V1) with this Flowline model will impact the minimum and maximum payload capacities.

Support Bar Assembly

Join support bar with body support by push-fit technique.
Your jacket is now ready to use.

Support Bar Height Adjustment

Loosen all four Adjustment Knobs provided on the back of the Support Jacket.
Then, adjust the height (Upward/Downward) of the Support Bar.
Once the support bar is at a desired height, re-tighten all four Adjustment Knobs to secure it.

Height Adjustable Support Bar

The system features height-adjustable knobs for customizing the support bar's position.

Side Support Adjustment

Rotate the side support rod 360° to adjust the body support fitment.
Loosen or tighten the side support as per your requirement.

Wearing the Support Jacket

Put on the support jacket and tighten the buckles provided at the waist and chest.
Adjust the jacket as per your convenience.

Camera Mounting

Attach the Camera (Not Included) to the hook and tighten using the provided knob to ensure a slip-free connection.

Note: It is recommended to attach the minimum required weight (4kg / 9lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.

Through the balance adjustment Knob, you can adjust the balance anti-clockwise according to the weight of your setup.

CAUTION: Do not release the lever without removing the setup. It may result in severe damage to the camera.

Note: By sliding the knob front or back, you can adjust the position of the camera.

Product Overview

YOUR FLYCAM FLOWLINE MASTER FOR CAMERA GIMBALS ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty Information

Warranty: Flycam offers a one-year warranty on its products from the date of purchase. During this period, Flycam will repair the product free of charge for labor or parts. The warranty does not cover transportation costs or products that have been misused or accidentally damaged. All warranty repairs are subject to inspection and evaluation by the Flycam team.

Liability: Flycam is not liable for any damage caused by third-party products, mishandling during transit, accidents, misuse, neglect, or unauthorized servicing of the product.

Contact Us: In case of any dissatisfaction, please contact Flycam immediately. Flycam is committed to providing the utmost support and care to ensure your satisfaction with the product.

	Flycam Flowline Master Female with Pro Vest Assembly Manual Assembly manual for the Flycam Flowline Master Female with Pro Vest (FLCM-FLN-MSTR-FM), detailing setup, usage, and warranty information.
	Flycam Flowline Camera Support Rig (FLCM-FLN) - Instruction Manual This instruction manual provides detailed guidance on the assembly, usage, and warranty of the Flycam Flowline Camera Support Rig (FLCM-FLN). Learn how to set up and operate this professional camera support system for smooth, stable shots.
	Flycam Flowline Starter for Camera & Gimbals Assembly Manual Assembly manual for the Flycam Flowline Starter, a camera stabilizer system for gimbals. Includes setup instructions, component identification, and warranty information.
	Flycam Flowline Master with Edge V1 Stabilization Arm Setup and Features A comprehensive guide to setting up and using the Flycam Flowline Master with Edge V1 Stabilization Arm, detailing its features, components, and operational adjustments for professional camera stabilization.
	Flycam Flowline Starter with Edge V1 Stabilization Arm Assembly Manual Assembly manual for the Flycam Flowline Starter with Edge V1 Stabilization Arm (FLCM-FLN-EGV1). Includes setup instructions, features, and warranty information.
	Flycam Flowline Starter Body Rig Assembly Manual Assembly manual for the Flycam Flowline Starter Body Rig (B-FLCM-FLN-02), detailing setup, height adjustment, and camera mounting.
	FLYCAM Starter Female Flowline Body Support Rig (B-FLCM-FLN-FM) Assembly Manual Comprehensive assembly manual for the FLYCAM Starter Female Flowline Body Support Rig (Model B-FLCM-FLN-FM). Includes step-by-step setup instructions, component identification, warranty information, and liability details for professional videographers.
	FLYCAM Flowline Placid 2-Axis Stabilizing Arm (FLCM-FLN-PLA) Assembly Guide Comprehensive assembly manual for the FLYCAM Flowline Placid 2-Axis Stabilizing Arm (FLCM-FLN-PLA), detailing setup, parts, and usage instructions for professional camera stabilization.