Flowline Starter for Camera & Gimbals (B-FLCM-FLN-01)

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

• Body Support
• 2.5mm L-Type Allen Key
• 2 x Washer
• 2 x Velcro
• Bag Packing

Flycam Flowline Starter Body Rig Components

The Flycam Flowline Starter Body Rig consists of the following key components:

• Camera Hook: Attaches to the camera or gimbal.
• Support Bar: Connects the camera hook to the body support.
• Side Support Adjustment: Allows for adjustment of the support system on the sides.
• Balance Adjustment Knob: Used to fine-tune the balance of the rig.

Flycam Flowline Starter Setup

Note: It is recommended to attach the minimum required weight (3kg / 6lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.

NOTE: Using Placid (FLCM-FLN-PLA) or Edge V1 (FLCM-EDGE-V1) with this Flowline model will impact the minimum and maximum payload capacities.

Support Bar Assembly

• Join the Support Bar with Body Support in the push-fit technique.
• Your Jacket is ready to use.

Capture Every Angle: Top Bar with 180° Rotation

Support Bar Height Adjustment

• Loosen all four Adjustment Knobs provided on the back of the Support Jacket.
• Then, move the Support Bar upwards or downwards as per your requirement.
• Once the Support bar is at the desired height, re-tighten all four Adjustment Knobs to secure it.

Height Adjustable Support Bar

Jacket and Camera Mounting

• Put on the Support Jacket and tighten the buckles provided at the waist and chest.
• Adjust the Jacket at your convenience.

Camera Mounting

• Attach the Camera (Not Included) to the hook and securely tighten the provided knob to ensure a slip-free connection.

Note: To ensure the optimal performance of your Flycam Flowline system, it is crucial to attach the minimum required weight (3kg / 6lb) for pulling down the balancing rope. This will guarantee smooth and stable operation.

• Use the knob at the back of the Body Support to tighten the tension as needed.

Final Product Showcase

YOUR FLYCAM FLOWLINE STARTER FOR CAMERA GIMBALS ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty and Liability

Warranty: Flycam offers a one-year warranty on its products from the date of purchase. During this period, Flycam will repair the product free of charge for labor or parts. The warranty does not cover transportation costs or products that have been misused or accidentally damaged. All warranty repairs are subject to inspection and evaluation by Flycam's team.

Liability: Flycam is not liable for any damage caused by third-party products, mishandling during transit, accidents, misuse, neglect, or unauthorized servicing of the product.

Contact Us: In case of any dissatisfaction, please contact Flycam immediately. Flycam is committed to providing the utmost support and care to ensure your satisfaction with the product.