iLive ISB199 Wireless Tailgate Speaker User Guide

Model: ISB199 v2352-01

Important Safety Instructions

FCC Warnings

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Additional Warnings and Precautions

Safety Symbols:

⚠️ CAUTION: RISK OF ELECTRIC SHOCK ? DO NOT OPEN

⚠️ ATTENTION: RISQUE D'ÉLECTROCUTION NE PAS OUVRIR

⚠️ The exclamation point within an equilateral triangle alerts the user to important operating and maintenance instructions.

⚡ The lightning flash with arrowhead symbol alerts the user to the presence of un-insulated "dangerous voltage" within the product's enclosure.

Double Insulation Symbol: Indicates this product incorporates double insulation between hazardous mains voltage and user accessible parts.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations.

Overview

Features

  • Bluetooth 5 wireless - range 60 ft.
  • Voice prompts announce speaker functions.
  • Single 3" speaker.
  • LED color changing lights.
  • FM radio.
  • 3.5mm Aux In.
  • MicroSD card port - supports MP3 file format and MicroSD cards up to 64GB.
  • USB port - supports MP3 file format.
  • Built-in rechargeable battery.
  • Battery life: approx. 3 hrs playtime at 100% volume.

Includes

  • USB cable for battery recharge.

Control Panel

Top View:

  • 1. USB Media Port: For connecting USB drives.
  • 2. MicroSD Card Media Port: For connecting MicroSD cards.
  • 3. DC Power Input: Use to charge the internal battery and power the speaker.
  • 4. Aux In (3.5mm Audio Input): For connecting external audio devices via 3.5mm cable.
  • 5. Power OFF/ON/LIGHTS: Switch to ON to power the speaker only. Switch to LIGHTS to power both the speaker and the LED lights.
  • 6. Source Button: Press to change play mode (Bluetooth/Aux/FM). Press and hold to pair to a Bluetooth device.
  • 7. Volume/Skip Buttons: Short press to adjust volume. Press and hold to skip audio tracks (Bluetooth/USB/SD) or radio presets (FM).
  • 8. FM Scan Button: Press and hold to scan and save radio stations. Press to play or pause tracks (Bluetooth/USB/SD).

Diagram Description: The top view shows ports and buttons labeled 1 through 8. Ports include USB, MicroSD, DC Power Input, and Aux In. Buttons include Power/Lights, Source, Volume/Skip, and FM Scan.

Front View:

Diagram Description: The front view shows the speaker grille and the overall aesthetic of the device.

Operations

Charging the Battery

To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and connect it to a powered-on computer or USB power adapter (not included) and a standard power outlet. Charging time is approximately 2.5 hours. Battery life is approximately 3 hours at 100% volume. Battery life can be extended by playing at lower volume levels.

Diagram Description: Shows a USB cable connecting from a laptop (labeled "USB") to the DC Power Input port (labeled "DC IN 5V") on the speaker.

USB Mode

  1. Load a USB drive into the USB Media port (1). The speaker will automatically switch to USB Mode, indicated by a voice prompt, and begin playing media on the drive.
  2. Use the controls on the speaker (Source, Volume/Skip, FM Scan/Play/Pause) to select and play audio from the connected drive.

MicroSD Memory Card Mode

  1. Load a MicroSD memory card into the MicroSD memory card port (2). The speaker will automatically switch to SD Card Mode, indicated by a voice prompt, and begin playing media on the card.
  2. Use the controls on the speaker (Source, Volume/Skip, FM Scan/Play/Pause) to play, pause, and skip audio on the card.

Bluetooth Wireless Mode

When first powered on, the speaker defaults to Bluetooth Mode, indicated by a voice prompt. All other play modes will change automatically when connected to different audio sources.

  1. Power on the speaker by adjusting the Power Switch (5) to the ON or LIGHTS position. The speaker defaults to Bluetooth Mode and is ready to pair automatically. Remain within 3 feet of the Bluetooth device when pairing.
  2. Using the controls on your Bluetooth device, select "ISB199" in the Bluetooth Settings to pair. Refer to your specific device's user manual for more information if needed.
  3. When successfully paired, a voice will announce, "Bluetooth is connected." Your Bluetooth device will now be heard through the speaker.
  4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
  5. After initial pairing, the speaker will automatically connect to the last Bluetooth device used whenever it is in Bluetooth Mode. If your device becomes unpaired or you cannot connect, press and hold the Source button (6) to enter Pairing Mode. A voice will announce, "Bluetooth is connecting," and you can connect manually.

FM Radio Mode

An FM receiver is built into the speaker. Adjust the position of the speaker to improve FM radio reception.

Radio Tuning and Saving Station Presets

  1. Press the Source button (6) to select FM Radio Mode, indicated by a voice prompt.
  2. Press and hold the FM Scan button (8) to scan and save radio stations automatically.
  3. Press and hold the Volume/Skip buttons (7) to cycle through saved radio stations.

Aux In Mode

Requires a 3.5mm audio cable (not included).

  1. Connect a 3.5mm audio cable to the Aux In port (4) on the unit and the audio output/headphone jack on an audio device.
  2. Press the Source button (6) to switch to Aux Mode.
  3. Use the controls on the connected device to select and play audio. Ensure the volume on your connected device is audible before playing.

Customer Support

To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com

Customer Service: 1-888-999-4215

Email Support: prodinfo@dpiinc.com

Email Parts: partsinfo@dpiinc.com

Copyright © 2019 Digital Products International (DPI, Inc.). All other trademarks appearing herein are the property of their respective owners.

Specifications are subject to change without notice.

Sustainability Note: Made Green. Protect for Today. Sustain for Tomorrow.

PDF preview unavailable. Download the PDF instead.

5000198903 how Adobe PDF Library 15.0 Adobe InDesign CC 13.1 (Macintosh)

Related Documents

Preview iLIVE ISB310 Wireless Tailgate Party Speaker User's Guide
User's guide for the iLIVE ISB310 Wireless Tailgate Party Speaker, covering safety instructions, features, control panel, and operation for Bluetooth, USB, SD, FM radio, and microphone.
Preview iLive ISBW240 Outdoor Bluetooth Speaker User's Guide
User's guide for the iLive ISBW240 Bluetooth speaker, covering features, setup, controls, Party Plus Mode, Bluetooth pairing, FM radio, and battery charging.
Preview iLive Wave Wireless Speaker System ISB273B User's Guide
User's guide for the iLive Wave Wireless Speaker System, Model ISB273B. This guide covers features, controls, Bluetooth pairing, Party+ mode, charging, safety instructions, and customer support.
Preview iLive ISBW337 Waterproof Wireless Speaker User's Guide
Comprehensive user guide for the iLive ISBW337 Waterproof Wireless Speaker, detailing features, setup, Bluetooth connectivity, speakerphone operation, charging, water resistance, and support.
Preview iLive ICWFV428 Voice Activated Clock with Amazon Alexa User Guide
Comprehensive user guide for the iLive ICWFV428 Voice Activated Clock with Amazon Alexa, covering setup, Wi-Fi connection, Alexa integration, alarms, app usage, Bluetooth, and troubleshooting.
Preview iLive ISB182 Portable Wireless Speaker User's Guide
User guide for the iLive ISB182 Portable Wireless Speaker, covering features, setup, Bluetooth pairing, audio playback, line input, power, warnings, and contact information.
Preview iLive ISB312 Wireless Jobsite Speaker User Guide
User's guide for the iLive ISB312 Wireless Jobsite Speaker, covering important safety instructions, features, operation, and troubleshooting.
Preview iLive Projector Bundle Quickstart Guide
A quickstart guide for setting up and using the iLive Projector Bundle, including connecting the projector, screen, and Bluetooth speaker.