5231 Assembly Instruction
Accessories List
- A: Seat Frame [Image: Seat frame structure]
- B: Seat Cushion [Image: Padded seat cushion]
- C: Backrest [Image: Chair back support]
- D: Chair Leg [Image: One of the four legs]
- E: M6*30MM Screw (x1)
- F: Washer 6*18*1.2 (x3)
- G: M6*18MM Screw (x3)
- H: M6*45MM Screw (x4)
- I: Allen Key [Image: L-shaped tool]
Notice
- Firmly secure all parts before use.
- Reconfirm that all parts are secure every 90 days.
- Do not use or store this item or its parts in the proximity of open flame or flammable/combustible chemicals.
- Do not expose this product to water.
- Do not stand on the chair.
- Do not let small children or pets near during assembly.
- Do not use this item in a way inconsistent with the manufacturer's instructions, as this could void the product warranty.
Assembly Steps
Step 1
Lock the screws 80% at first. [Diagram: Attaching the backrest (C) and legs (D) to the seat frame (A) using screws (G) and washers (F).]
Step 2
Lock the screws 80% at first. [Diagram: Attaching the seat cushion (B) to the seat frame (A) using screws (G) and washers (F).]
Step 3
Lock the screws 80% at first. [Diagram: Attaching the legs (D) to the seat frame (A) using screws (H) and washers (F).]
Step 4
300lbs or adult seat in chair, make sure the chair is balanced then tighten all the screws. [Diagram: Completed chair with weight capacity indicator: [Max 300lbs].]