BaByliss D6555DE Hair Dryer

Instructions for Use

First, read the safety instructions.

• Dry hair with a towel and comb it.
• Connect the appliance to a suitable power outlet.
• Select the desired temperature and speed settings.
• After use, turn off the appliance and unplug it from the socket.
• Allow the appliance to cool down before storing it.

IMPORTANT! Always keep the rear of the appliance away from hair during use to prevent hair from being drawn into the appliance through the rear filter.

Temperature and Speed Settings

The appliance has four temperature and three speed settings, plus a cool shot button. The temperature is indicated by an indicator light around the temperature button: blue means cool, yellow means low, orange means medium, and red means high. The speed indicator light is white. Use higher temperature and speed settings for initial drying, and lower temperature and speed settings for styling curls, by scrunching hair with your fingers while drying. To use the cool shot function, press and hold the button continuously. Use the cool shot to quickly cool and set your hairstyle.

Attachments

Concentrator Nozzle

The 4 x 70 mm and 6 x 60 mm concentrator nozzles with a secure locking system provide a faster, smoother airflow for styling, smoothing, and drying curly or shorter hair.

IMPORTANT! Use the concentrator nozzles only with the lowest temperature/speed setting.

Diffuser

The large diffuser with a secure locking system allows for quick drying and prevents frizz, creating soft and defined waves and curls.

IMPORTANT! Use the diffuser only with the lowest temperature/speed setting.

Using the attachment secure locking system: Align the four points at the base of the attachment with the four openings on the nozzle of the hairdryer. To attach, turn the attachment on the hairdryer into place.

Memory Function

The smart sensor system automatically remembers the last used settings. The last used mode will remain in the appliance's memory until the next use.

Cleaning and Maintenance

Follow these tips to keep the appliance in optimal working condition for a long time.

General

• Ensure the appliance is turned off, the power plug is removed from the socket, and the appliance has completely cooled down. Wipe the exterior surfaces of the appliance with a damp cloth. Ensure no water enters the appliance and that it is completely dry before use.
• Do not wrap the cord around the appliance; coil it loosely beside the appliance.
• Do not pull the power cord taut during use.
• Always unplug the power plug after use.

Electronic Sensor Magnetic Rear Filter

The magnetic rear filter automatically positions itself correctly and is easy to remove and clean. For safety, the appliance's power will automatically shut off if the filter is removed. The red indicator light on the temperature switch will flash while the filter is removed. To switch the appliance back on, replace the rear filter and switch the appliance on again.

Cleaning the Filter

• Ensure the appliance is turned off, the power plug is removed from the socket, and the appliance has completely cooled down.
• Hold the hairdryer by the handle and pull the magnetic rear filter away from the appliance.
• Gently wipe the filter to remove any hair or debris accumulated on the filter mesh.
• Replace the rear filter.