General Mobile
GMPods 2 Pro
Wireless Bluetooth Earphones Quick Start Guide
Diagram: Two wireless earphones shown in outline.
Product Overview
Description of Earphone and Charging Case Components:
- Earphones:
- Pressure inspection hole
- Anti-noise microphone
- Touch area
- LED indicator
- Microphone
- Charging Case:
- LED indicator
- Charging Pins
- TYPE-C jack
- Multifunction button (MFB)
Pairing with the Device
Initial Pairing:
- Open the cover and remove the earphones from the charging box.
- Search for GMPods 2 Pro on your smart device and tap to connect.
Note: The earphones will automatically turn on after being removed from the charging box, or please recharge and try again.
To Change a Paired Device:
- To disconnect the earphone and enable pairing mode, turn off the Bluetooth connection of device A.
- Search for GMPods 2 Pro on device B and tap to connect.
Note: Multi-connection is not supported. Earphones will be automatically connected to device B and turned on again.
Diagram: Earphones being removed from the charging case, with arrows indicating upward movement.
Factory Settings
- Place the earphones in the charging box and open the case cover.
- To restore the earphones to factory settings, hold down the Multifunction Button (MFB) for 10 seconds or until the LEDs on the charging box and the earphones flash red and blue 3 times.
Note: If the earphones fail to connect, try the steps given above.
Diagram: Earphones in the charging case, with a finger pressing the Multifunction Button (MFB) on the case, and a circular arrow indicating the action.
How to Put On the Earphones
- Put the earphones in your ear, then shake your head to check the wearing stability.
- Adjust the microphone towards your mouth to get a better calling and speaking experience.
- Please put the earphone heads in your ears correctly, making sure they fit tightly and the sound holes are inside the ear canals.
Diagram: Illustrates inserting earphones into the ear, showing correct positioning for stability and sound. Includes close-ups of earphone placement.
Single Mode
- Take one of the earphones for connectivity to the phone (the LED will flash red and green).
- Search for GMPods 2 Pro on your smart device and tap to connect.
Charging the Earphone
To charge the earphone, place it inside the charging box. While charging, the LED will light up red and turn green for 1 minute after the earphone is fully charged.
Charging the Charging Box
Charge the charging box using the USB cable. The LED on the charging box will light up red when charging and turn green when charging is complete.
Details of the Functions
Functions | Current Status | Operation/Result | LED | Response |
---|---|---|---|---|
On | On | Tap and hold the panel for 1.5 seconds | LED green | TONE |
On | Earphones are in the charging box and plugged in the charger | Open the cover and remove the earphones from the charging box. | The LED will flash green | TONE |
Off | On | Press and hold on the earphones for 4.5 seconds | They will be charged and the LED will turn red | TONE |
Off | On/The charging box is plugged in the charger | Attach the earphones to the charging box and close the cover | The LED will turn red for 2 seconds | TONE |
Factory Settings | Place it in its box and open the cover | Press the button on the charging box for 10 seconds | The green LED will flash 3 times | TONE |
Answering / Ending a call | Incoming call/dialing | Tap the bar twice successively | TONE | |
Muting the call | Incoming call | Keep holding the bar for 1.5 seconds | TONE | |
Voice Assistant | Connected | Tap the left/right earphone 3 times successively | TONE | |
Pausing / playing music | Music playing | Tap 2 times successively to stop or resume | ||
Skipping to previous song | Music playing | Tap and hold the left earphone to rewind | ||
Skipping to next song | Music playing | Tap and hold the right earphone to fast forward |
Dangerous Chemicals in the Product and Their Contents
This form was prepared in accordance with the SJ / T 11364 regulation.
O: means that the content of hazardous chemicals in the homogeneous materials of this part is within the limits of the (EU) 2015/863 regulation.
X: means that the content of hazardous chemicals in at least one homogeneous material of this part is beyond the limits of the (EU) 2016/863 regulation, but still complies with the EU ROHS Directive by exemption.
Part Name | Dangerous Substances | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Pb | Hg | Cd | Cr (VI) | PBB | PBDE | DIBP | DEHP | DBP | BBP | |
Main Section | X | O | O | O | O | O | O | O | O | O |
Battery | O | O | O | O | O | O | O | O | O | O |
Earphone Types | O | O | O | O | O | O | O | O | O | O |
Accessories | O | O | O | O | O | O | O | O | O | O |
Charging Cable | X | O | O | O | O | O | O | O | O | O |
Standards Applied: Q / HL 1-2019; Q / HL 2-2017
Manufacturer: Dongguan Hele Electronics Co., Ltd. Address: Daojiao Town, Dongguan City, Guangdong, China.
Tips and Warnings
Tips:
- Before using your earphones, please read this guide carefully and save it for future reference.
- The earphones need to be fully charged before the initial use.
- If the earphones will not be used for more than two weeks, please remember to charge them regularly.
- Please use chargers manufactured by an approved manufacturer.
- If your earphones cannot be detected by your phone, please check if they are in pairing mode. If left unconnected for a long time, the earphones will exit pairing mode; please re-enable the mode. If a procedural error occurs on your phone, restart it. If a procedural error occurs on your earphones, restart or reset them.
Warnings!
- To avoid damages or dangerous situations, never disassemble or modify your earphones for any reason.
- Do not store the earphones in extreme temperatures (below 0°C or above 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earphones during a storm to avoid erratic functions and increased risk of electric shock.
- Do not use abrasive chemicals or strong detergents to clean the earphones.
- Keep the earphones dry.
Regulatory Information: [Bluetooth Logo] [FCC Logo] [Qualified] [CE Logo] [RoHS Logo]
CMIIT ID: 2019DP10326 FCC ID: RDR-IN1933
Warranty Certificate
Warranty period starts from the date of delivery of the product to the consumer and lasts for two (2) years. The entire product, including all its parts, is under warranty during the warranty period. If the product fails, the time spent for repairing is added to the warranty period. The warranty period of the product replaced during the warranty period is limited to the remaining warranty period of the purchased product.
The maintenance and repair period of the product cannot exceed twenty (20) working days during its lifetime. This period starts from the date when the failure in the product is notified to the authorized service station or the seller, if the warranty period still continues, and from the date of delivery of the product to the authorized service station, if the warranty period has already ended. The consumer can make the failure notice by phone, fax, e-mail, registered letter with return receipt and similar ways. In case of dispute, the consumer has the burden of proof regarding the relevant notice.
Pursuant to article 11 of the Law on the Protection of the Consumer No. 6502, if the products are found to be defective, the consumer may exercise one of the following rights:
- Rescission of the contract by declaring that they are ready to return the sold item,
- Withholding the sold product and requesting a discount from the sales price in proportion to the defects,
- If it does not require an excessive cost, requesting free repair of the sold item at the seller's expense,
- If available, requesting that the sold product be replaced with a non-defective one.
The seller is obliged to fulfill the requirement as per the choice of the consumer. The rights of free repair or replacement of the product with a non-defective one can also be used against the manufacturer or the importer.
The seller, the manufacturer and the importer are conjointly liable for the fulfillment of the rights specified in this paragraph. The manufacturer or the importer cannot be held responsible if it is proved that the defect has occurred after the product has been put on the market by them. If free repair or replacement of the product with a non-defective one would bring along disproportionate difficulties for the seller, the consumer may use one of the rights to withdraw from the contract or reduce the price in proportion to the defect. If one of the rights to repair free of charge or to replace the product with a non-defective one is preferred, it is obligatory to fulfill this request within a maximum of thirty working days after it is communicated to the seller, manufacturer or importer. However, the consumer's free repair request is fulfilled within the maximum repair period (20 working days). Otherwise, the consumer is free to exercise other rights. In cases where the consumer chooses the right to withdraw from the contract or reduce the price in proportion to the defect, the entire price paid or the amount of the discount made from the sales price is immediately returned to the consumer. All costs incurred due to the exercise of rights are covered by the party that fulfills the right chosen by the consumer. Along with one of these rights, the consumer may also claim compensation in accordance with the provisions of the Turkish Code of Obligations No. 6098.
Authorized service stations or if an authorized service station is not available; respectively, the seller, importer or manufacturer of the product are obliged to determine whether there is a usage error regarding the failures or not, with the report prepared within the maximum repair period for the product and to give a copy of this report to the consumer.
Failures that may occur due to reasons such as, use of the product contrary to the matters in the introduction and user guide; use of unoriginal accessories, batteries and chargers; fluid spillage on the device; device receiving a hit; intervention by unauthorized persons not approved by the manufacturer; installation of unoriginal software or installation of applications not approved by the manufacturer will be deemed to have taken place as a result of usage error and the product will be out of warranty. If a usage error is detected on the product, the consumer will not be able to exercise one of the following rights: the right to request free repair of the product, the replacement of the product with a non-defective one, withdrawal from the contract or request a discount in proportion to the defect.
Regarding the consumer's complaints and objections regarding the product; the consumer, according to the monetary value in Article 68 of the Law on the Protection of the Consumer No. 6502, may apply to the Provincial/District Consumer Arbitration Committees or Consumer Courts in the place of residence or where the consumer's transaction is made.
If the Warranty Certificate is not issued by the seller, the consumer may take legal actions via the General Directorate of Consumer Protection and Market Surveillance of the Ministry of Customs and Trade.
Importer and Declaration Information
Importer Company
Title: Telpa Teknoloji Hizmetleri A.Ş.
Address: İkitelli OSB Mahallesi 17. Cadde, No:3, 34490 Başakşehir, İSTANBUL/TÜRKİYE
Stamp and Signature: [Telpa Teknoloji Hizmetleri A.Ş. Stamp and Signature]
Seller Information
Tradename:
Address:
Tel:
Fax:
E-mail:
Invoice Date and Number:
Delivery Date and Place:
Signature of Authorized Person:
Company Stamp:
Product Details
Type: Wireless Earphones
Brand: General Mobile
Model: GMPods
Delivery Date and Place:
Banderole and Serial No.:
Declaration of Conformity
Product Description: True Wireless Stereo Bluetooth Earphone
Brand: General Mobile
Model: GMPods 2 Pro
We hereby declare that the above named products are in conformance to all the essential requirements of the directive RED. To which this declaration relates, is in conformity with the following standards and/or other normative documents:
- EN 62479:2010
- EN IEC 62368-1:2020
- ETSI EN 301 489-1 V2.2.3 (2019-11)
- ETSI EN 301 489-17 V3.2.4 (2020-09)
- ETSI EN 300 328 V2.2.2 (2019-07)
Manufacturer: Dongguan Hele Electronics Co., Ltd
Importer: Telpa Teknoloji Hizmetleri A.S. İkitelli OSB Mahallesi 17. Cadde, No:3, 34490 Basaksehir İSTANBUL/TURKEY
Signed by: Sebahattin YAMAN/CEO, 15.03.2021