Instruction Manual for stando models including: Universal CPU Mount with Mounting Brackets, CPU Mount with Mounting Brackets, Mount with Mounting Brackets, Mounting Brackets, Brackets

Universal CPU Mount with Mounting Brackets Instruction Manual

Download Universal CPU Mount with Mounting Brackets Instruction Manual.  

Universal CPU Mount with Mounting Brackets – Stando. Universal CPU Mount with Mounting Brackets Instruction ManualView the setup instructions for the Universal CPU Mount with Mounting Brackets.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 358.67KB

Universal CPU Mount Instruction Manual

1

This mount gives you the option to mount in 2 positions.

Option A: Mount on the outside of your desk frame. May require you to move the leg inwards before install.

Option B: Mount on the inside of your desk frame.

2
Before you begin, measure the width of your computer.

Then mount the brackets on your desk 5mm wider than your computer using self tapping timber screws.

A
3

B

Once the brackets are screwed into position, its time to install the mount. Use the short machine screws to complete this step.

4
Loop the straps through the brackets ensuring the buckle opens outwards (see next steps).

5

Loop the straps through the buckles as shown in these 4 steps. When tightening to your computer, have straps tight then push buckle closed which will tighten slightly further for a snug fit.

sales@stando.com.au Phone: 07 3520 7273 www.stando.com.au



References

• Ergonomic Office Furniture Australia | Stando.