Large Flush Wood Insert Rectangular: 1 Piece Surround Panel Installation
SKUs: 96100392, 96100393
Compatibility
- Large Flush Wood Hybrid-Fyre Insert
Surround Panel Sizing
| SKU | Height | Width |
|---|---|---|
| 96100392 | 32-1/2" | 42" |
| 96100393 | 35" | 47" |
Packing List
- Surround Panel
- (2) Panel Mounting Brackets
- (6) #10 screws (included with insert hardware pack)
Installation
Step 1
Before installing, the insert should be in place with the flue attached. Attach the brackets as shown below, using the screws included in the hardware pack with the insert. Make sure the brackets are flush with the front of the convection chamber.
Diagram Description: A visual representation shows the front of a wood insert. Two L-shaped mounting brackets are depicted, ready to be attached to the front frame of the insert. Arrows indicate the precise placement for the brackets and the screws that secure them. The text emphasizes ensuring the brackets are flush with the front of the convection chamber.
Step 2
Attach the surround panel as shown below.
Diagram Description: This illustration demonstrates the process of attaching the surround panel to the wood insert. Arrows guide the user on how to slide the panel into its final position. The diagram also highlights the wiring that needs to be managed. A prominent WARNING advises: "Make sure all wiring is inserted into the cavity between the insert and the fireplace. Failure to do this may cause the wiring to become damaged." Additionally, a HINT suggests: "When installing the panel, route the wires through the notch on the bottom of the panel (either side)."
