MILI Mag-Soundmate Mini MagSafe Bluetooth Speaker

Important Safety Information

• Comply with basic safety instructions for safe and reliable product use.
• Adhere to all warnings and guide information marked on the product.
• Use charging equipment with a 5V output voltage to avoid equipment damage.
• The product uses a built-in polymer lithium battery; shut down when not in use.

Caution

Removal of the built-in battery invalidates the warranty and may destroy the product.

Note

Rechargeable batteries have a limited number of charge cycles. Battery life and cycle count vary by usage and settings.

Warning

• Never operate the product when wet, or spill any liquid on it.
• Never place the product near high-temperature heat sources, or dry or blow it at high temperatures.
• Never apply great pressure on the product.

Product Specification

• Product Model: HD-M12
• Bluetooth version: 5.0+EDR
• Input: 5V±1A
• Loudspeaker: 3W
• Wireless Bluetooth Range: 10m
• Time of use: Varies (specific duration not detailed)
• Charging time: 1.5 hours
• Case material: ABS+PC
• Capacity: 420mAh
• Weight: 80g

What's in the box

• Mug-SoundMate® x 1
• USB-C Cable x 1
• User manual x 1

Product Configuration

• Dust-proof design
• Washable with cover
• Silicon plug
• Lithium polymer battery
• Bottom magnet for MagSafe attachment
• Non-slip silicone pad

How to get into TWS mode for 2 Speakers

1. Power on one speaker and connect it to your phone via Bluetooth.
2. Power on the second speaker, then double-click its power button to enter TWS mode.

Note: In TWS mode, your phone only needs to connect to one speaker via Bluetooth.

Tip: If you power on two speakers simultaneously before Bluetooth connection, power off one speaker first and follow the instructions above to enter TWS mode.

Note: When the device's power is below 10%, the indicator will flash blue, and it will shut down automatically with a "power off" voice alert.

Use Bluetooth Devices

With the speaker, you can listen to audio from a player and make calls via Bluetooth.

Note:

• The operational range between this product and a Bluetooth device is approximately 15 meters (35 feet).
• Obstacles between the speaker and a Bluetooth device can reduce the operational range.

Connect a device

• On your device, disable the Bluetooth connection with this speaker.
• The speaker will provide a voice prompt when disconnected.

Note: Before connecting another Bluetooth device, disconnect the current device first.

Reconnect a device

For paired Bluetooth devices with automatic reconnection enabled, this product will reconnect automatically. For devices that do not support automatic reconnection, reconnect manually.

Play audio via Bluetooth

Note: If there is an incoming call on the connected mobile phone, music playback will pause.

Troubleshooting

Note: To keep the warranty valid, never attempt to repair the product yourself.

If you encounter problems, check the following points before requesting service. If these steps do not resolve the issue, consider replacement or repair after inspection.

• No power: Recharge your speaker.
• No sound: Adjust the volume on this product and the connected device. Ensure your Bluetooth device is within the effective operational range.
• No response from the speaker: Restart the speaker. Use a needle to press the reset button (located in the microphone hole) to reset the speaker.
• Poor audio quality after connection: Move the device closer to the speaker or remove any obstacles between them.
• Cannot connect with the device: Ensure this product is not already connected to another Bluetooth device. Disconnect the other device and try again.

MILI Manufacturer's Product Warranty

MILI 1 Year Limited Warranty

• Hail-Power (Shenzhen Hail-Power Industrial Co., Ltd.) warrants MILI products against defects in materials and workmanship for a period of 1 year from the date of original purchase (Warranty Period).
• All products must be registered online within 90 days of purchase to qualify for the 1-year warranty. If a defect arises and a valid claim is received by MILI within the Warranty Period, MILI will, at its option:
• Repair the product using new or refurbished replacement parts.
• Exchange the product with a new product.
• Freight costs for returns will be shared: Customer bears freight to the factory, and MILI bears freight to the customer. For maintenance and repairs outside the service range, the customer will bear all freight and relevant charges.

Exclusions and Limitations

This section largely reiterates information about MILI's wireless charging technology and the importance of product registration for warranty activation. It emphasizes reading instructions and warnings carefully.

Contact Us

• For any questions or problems with your product, please contact Customer Support at cs@hali-pow-ec.com.
• Visit our website: www.mymili.com.

Additional Information

• For non-magnetic phones or objects, attach the included steel ring to the speaker for magnetic attachment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.