Schneider Electric Harmony GTO HMIGTO4310
Advanced Touchscreen Panel
Product Data Sheet
Main Specifications
| Range of Product | Harmony GTO |
| Product or Component Type | Advanced touchscreen panel |
| Display colour | 65536 colours |
| Display size | 7.5 inch |
| Supply | External source |
| Operating System | Harmony |
| Battery type | Lithium internal RAM 100 days 5 day(s) 10 year(s) |
Complementary Specifications
| Terminal type | Touchscreen display |
| Display Type | Backlit colour TFT LCD |
| Display Resolution | 640 x 480 pixels VGA |
| Touch sensitive zone | 1024 x 1024 |
| Touch panel | Resistive film, 1000000 cycles |
| Backlight lifespan | 50000 hours white at 25 °C (77 °F) |
| Brightness | 16 levels by touch panel, 16 levels by software |
| Character font | Korean, Taiwanese (traditional Chinese), Japanese (ANK, Kanji), ASCII, Chinese (simplified Chinese) |
| [Us] rated supply voltage | 24 V DC |
| Supply voltage limits | 19.2...28.8 V |
| Inrush current | 30 A |
| Maximum power consumption | 8 W (when power is not supplied to external devices), 5 W (when backlight is OFF), 5.5 W (when backlight is dimmed), 12 W (total) |
| Local signalling | Status LED (green, steady offline/operating; orange, flashing software starting up; red, steady power supply ON/clear, faded power supply OFF). COM2 LED (yellow, steady data is being transmitted/yellow, faded no data transmission). SD card LED (green, steady card is inserted/green, faded card is not inserted or not being accessed). |
| Software designation | Vijeo Designer configuration software >= V6.1 |
Technical Specifications
| Memory description | Flash EPROM, 96 MB |
| Data backed up | 512 KB internal RAM (SRAM) |
| Data storage equipment | SD card, <= 32 GB; SDHC card, <= 32 GB |
| Downloadable protocols | Schneider Electric Modicon Modbus, Schneider Electric Modicon Uni-TE, Schneider Electric Modicon Modbus Plus, Schneider Electric Modicon FIPWAY, Mitsubishi Melsec third party protocols, Omron Sysmac third party protocols, Rockwell Automation Allen-Bradley third party protocols, Siemens Simatic third party protocols, Schneider Electric Modicon Modbus TCP |
| Integrated connection type | COM1 serial link SUB-D 9 RS232C (2400...115200 bps); COM2 serial link RJ45 RS485 (2400...115200 bps); COM2 serial link RJ45 RS485 (187.5 kbps Siemens MPI); Ethernet RJ45 (10BASE-T/100BASE-TX); Ethernet RJ45 (IEEE 802.3); USB 2.0 type A; USB 2.0 type mini B |
| Product mounting | Flush mounting |
| Fixing mode | by 4 screw clamps |
| Front material | PPT |
| Enclosure Material | PPT |
| type of cooling | Natural convection |
| Width | 8.6 in (218 mm) |
| Height | 6.8 in (173 mm) |
| Depth | 2.4 in (60 mm) |
| Net Weight | 2.6 lb(US) (1.2 kg) |
Environment
| Standards | IEC 61131-2, IEC 61000-6-2 |
| Product Certifications | UL 508, CE, cULus, KCC, C-tick, UKCA, UKEX |
| Ambient Air Temperature for Operation | 32...131 °F (0...55 °C) |
| Ambient air temperature for storage | -4...140 °F (-20...60 °C) |
| Relative humidity | 10...90% without condensation |
| Operating altitude | < 6561.68 ft (2000 m) |
| IP degree of protection | IP20 (IEC 60529 rear panel), IP65 (IEC 60529 front panel) |
| NEMA degree of protection | NEMA 4X front panel (indoor use) |
| Shock resistance | 147 m/s² 3 chocks in each direction X, Y and Z (IEC 61131-2) |
| Vibration resistance | 3.5 mm (5...9 Hz) - X, Y, Z directions for 10 cycles (approx. 100 min) (IEC 61131-2); 1 gn (9...150 Hz) - X, Y, Z directions for 10 cycles (approx. 100 min) (IEC 61131-2) |
| Resistance to electrostatic discharge | 6 kV contact discharge (IEC 61000-4-2 level 3) |
Ordering and Shipping Details
| Category | US10MC222569 |
| GTIN | 3595864150277 |
| Returnability | Yes |
| Country of origin | ID |
Packing Units
Package 1
| Unit Type | PCE |
| Number of Units | 1 |
| Height | 5.71 in (14.500 cm) |
| Width | 10.47 in (26.600 cm) |
| Length | 12.01 in (30.500 cm) |
| Weight | 3.391 lb(US) (1.538 kg) |
Package 2
| Unit Type | P12 |
| Number of Units | 64 |
| Height | 41.34 in (105.000 cm) |
| Width | 31.50 in (80.000 cm) |
| Length | 47.24 in (120.000 cm) |
| Weight | 273.373 lb(US) (124.000 kg) |
Contractual Warranty
| Warranty | 18 months |
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via its ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
Environmental footprint
| Carbon footprint (kg CO2 eq, Total Life cycle) | 620 |
Materials and Substances
| F-gas usage performance | Only air and vacuum used for insulation / breaking, no F-gas including SF6 |
| Packaging made with recycled cardboard | Yes |
| Packaging without single use plastic | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| SCIP Number | 76565be4-97e1-4441-9623-82d029ddb7ce |
| REACH Regulation | REACH Declaration |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Use Again (Repack and remanufacture)
| Circularity Profile | End of Life Information |
| Removable battery | Yes |
| Take-back | No |
| WEEE | The product must be disposed of in European Union markets following specific waste collection and never end up in rubbish bins. |
Dimensions
External Dimensions:
Installation with Installation Fasteners:
Additional Views and Dimensions
Dimensions with Cables:
More External Views
Mounting and Clearance
Panel Cut Dimensions
Installation Fastener Dimensions
Installation Requirements
Mounting Angle
The mounting angle should be 30° or less. If installed in a slanted position with an incline more than 30°, the ambient temperature must not exceed 40 °C (104 °F). Forced air cooling (fan, A/C) may be required to maintain the ambient operating temperature at 40°C or less.
