ION Science Tiger XT Select

Pioneering Gas Sensing Technology.

ionscience.com/usa

Rapid Detection for Benzene & Total Aromatic Compounds

The Tiger XT Select (XTS) portable benzene gas detector rapidly detects Benzene & Total Aromatic Compounds (TACs), providing the most accurate and reliable data available.

Ultimate Performance

Utilizing the high output ION Science 10.0 eV lamp, the Tiger XT Select (XTS) portable benzene gas detector is capable of detecting Total Aromatic Compounds (TACs) including Benzene, Toluene, and Acetone. The instrument is supplied with a pack of benzene pre-filter tubes to detect benzene selectively. The tube can be easily attached to ensure rapid detection and selective measurement of benzene. Throughout the measurement process, the Tiger XT Select benzene gas detector continuously displays real-time data. The Tiger XT Select can also provide 15-minute Short Term Exposure Limits (STELs) and 8-hour Time Weighted Averages (TWAs) for Total Aromatic Compounds (TACs).

The Tiger XT Select handheld benzene gas detector can be used in standard operational mode without the use of a benzene pre-filter tube to deliver active indications of Volatile Organic Compounds (VOCs).

Key Features

  • ▶️ Improved Robust Design: The instrument's rugged body can withstand harsh environments.
  • ▶️ Long Rechargeable Battery Life: When fully charged, the lithium-ion battery can last up to 24 hours.
  • ▶️ IP65 Ingress Protection: Protection against a range of conditions and weather temperatures.
  • ▶️ Fast Response Time & Clear Down: Less than 2-second response time, one of the fastest and most accurate on the market.
  • ▶️ Instantaneous Alarms: Bright visible alarms: ? & ? with loud sounder (95 dBA at 300 mm).
  • ▶️ Humidity Resistant and Anti-Contamination Design: Patented Fence Electrode Technology ensures optimal performance and extends run time.

Tiger XT Select Features

Benzene pre-filter tube: Used to detect Benzene selectively.

Integrated torch: Designed for dimly lit areas.

Large, clear backlit display: For easy viewing in any light condition.

Low cost consumables: Including filters.

Flashing LEDs: Indicate low & high alarms.

Loud alarms: Sounder at 95 dBA at 300 mm.

Large clear keypad: Designed for one-handed operation.

Improved robust design.

Intrinsically safe: Meets ATEX, IECEx, North American and Canadian Standards.

Li-ion battery life: Up to 24 hours (charge time 8 hours).

Basic & Advanced Modes

For simplicity and ease of use, the Tiger XT Select has been split into two user-friendly modes: Basic & Advanced. Basic mode is designed to only offer the core functions for the detection of benzene and other TACs. In advanced mode, all operational modes are available, including standard running, TAC, and Tube mode.

Typical Applications

Typical applications for the Tiger XT Select include: Confined Space Entry, Plant Maintenance, Marine Down-Stream Monitoring, Hazardous Material Response, TAC detection at loading docks, and barge operations.

5 Year Extended Warranty

The Tiger XT Select can be registered online, which extends the warranty to up to 5 years. Register your instrument online within one month of purchase to extend the warranty.

Technical Specifications

Specification Details
Minimum sensitivity (PPM model) Standard running mode: 0.1 ppm
TAC mode: 0.01 ppm
Tube mode: 0.01 ppm (res. 0.001 ppm)
Minimum sensitivity (PPB model) Standard running mode: 0.001 ppm
TAC mode: 0.001 ppm
Tube mode: 0.01 ppm (res. 0.001 ppm)
Maximum reading** Standard mode: up to 20,000 ppm or 20,000 mg/m³*
Tube mode: 200 ppm or 639 mg/m³ benzene
Response time 130 seconds at 68°F (variable). Progressive indication of benzene breakthrough is displayed in real time.
Accuracy*** ± 10% display reading ± one digit (Benzene tube mode)
Intrinsically safe approvals II 1G Ex ia IIC T4 Ga
Tamb = 5°F to 113°F (with lithium ion battery pack)
Tamb = 5°F to 104°F (with alkaline battery pack)
ITS-I22ATEX35111X
IECEx ITS 22.0025X
ITS22UKEX0635X
3193491 conforms to UL Std. 913, 61010-1
Certified to CAN/CSA std. C22.2 No. 61010-1
Class 1 Division 1. Approval for Groups A, B, C & D, T4
Battery life Li-ion: life up to 24 hours, charge time 8 hours
Alkaline: 3 x AA, typically 8.5 hours life
Lamps 10.0 eV Krypton PID lamp
Data logging* 120,000 data log points including date and time stamp
Communication Direct USB 1.1
Calibration 2 and 3 point calibration (via calibration kit accessory)
Alarm Flashing LEDs Amber (low alarm), Red (high alarm)
Sounder 95 dBA at 300 mm (12")
Vibration on alarm
Pre-programmed TWA and STEL*
Flow rate ≥ 220 ml/min (with blocked flow alarm)
Temperature Operating: -4 to 140 °F
Humidity: 0-99% RH (non-condensing)
Protection Designed to IP65
EMC tested to EN61326-1:2013 & EN50270:2015 & CFR 47:2008 Class A
Weight & dimensions 370 mm (H) x 91 mm (W) x 60 mm (D)
870g

*Model and gas dependent. **Maximum reading is achieved with certain analytes such as ethanol. ***All specifications quoted are at calibration point and under the same ambient conditions. Specifications are based on Benzene calibrations at 68°F and 1000mBar. Tiger XT Select V1.0 This publication is not intended to form the basis of a contract and specifications can change without notice.

PDF preview unavailable. Download the PDF instead.

IonScience Tiger XTS Datasheet Adobe PDF Library 17.0 Adobe InDesign 18.0 (Macintosh)

Related Documents

Preview Ion Science TIGER Portable Gas Detector User Manual V3.1
Comprehensive user manual for the Ion Science TIGER portable gas detector, detailing its features, operation, maintenance, and PC software. Learn how to use this advanced Photo-Ionization Detector (PID) for detecting volatile organic compounds (VOCs) safely and effectively.
Preview ION TIGER XT, XTL, XT Select Quick Start Guide
A concise quick start guide for the ION TIGER XT, XTL, and XT Select gas detection instruments. It covers essential steps including instrument registration for extended warranty, proper charging procedures, downloading and installing the Tiger PC software, connecting the instrument via USB, and performing crucial bump tests and calibration.
Preview ION TIGER XT, XTL, and XT Select Quick Start Guide
A concise guide to setting up and using the ION TIGER XT, XTL, and XT Select gas detectors, including registration, charging, PC connection, and calibration procedures.
Preview ION Science Panther Instrument User Manual V1.0
User manual for the ION Science Panther gas leak detector, covering operation, calibration, system settings, probe options, specifications, and warranty. Learn how to use the thermal conductivity sensor for detecting gas leaks.
Preview ION Science SF6 LeakCheck P1 XTL Product Manual - User Guide and Technical Specifications
Comprehensive product manual for the ION Science SF6 LeakCheck P1 XTL, detailing its features, operation, maintenance, technical specifications, and EU Declaration of Conformity. Learn how to perform leak detection, concentration measurements, and manage device settings.
Preview ION ARA DOCK4 User Manual V1.0
User manual for the ION ARA DOCK4, an automatic test and calibration station for portable gas detectors. Covers safety, device overview, hardware, technical specifications, preparation, operation, management, maintenance, troubleshooting, and contact details.