HORIPAD Turbo

Thank you for purchasing this product. Please read the instructions carefully before using this product. Keep the instruction manual for future reference.

• Check that the Nintendo Switch system software is updated to the latest version.
• This controller only works in TV mode.
• This product does not support the following functions: Gyroscope, Accelerometer, Motion Camera - IR Camera, HD Rumble, HOME Button LED, NFC.

[Warning Triangle] Parents/Guardians: Please read the following information carefully.

• This product contains small parts. Keep out of reach of children under 3 years of age.
• Keep the product out of reach of small children and infants. If any small parts are swallowed, seek immediate medical attention.
• Long cable. Risk of strangulation.
• Keep the product away from dusty or humid places.
• Do not use this product if it is damaged or modified.
• Protect the product from getting wet. It may cause electric shock or malfunction.
• Do not place the product near heat sources or leave it in direct sunlight for extended periods. Overheating may cause malfunction.
• Do not touch the metal parts of the USB plug.
• Do not apply impact or weight to the product.
• Do not pull or bend the product's cable forcefully.
• Do not disassemble, modify, or attempt to repair this product.
• If the product requires cleaning, use only a soft, dry cloth.
• Do not use chemical agents such as benzene or thinner.
• Keep the packaging as it contains important information.
• Do not use this product for anything other than its intended purpose. HORI is not responsible for any accidents or damages resulting from misuse.
• Do not use the product with a USB hub. The product may not function correctly.

Package Contents:

• Controller × 1
• Instruction Manual × 1

Platform Compatibility

For Nintendo Switch™ 2:

Before using the product with Nintendo Switch™ 2, please refer to the Nintendo Switch™ 2 instruction manual. Check that the Nintendo Switch™ 2 system software is updated to the latest version.

Note: An internet connection is required for the latest Nintendo Switch™ 2 system software update.

For PC:

Layout and Functions

Connection

1. Set the switches to the appropriate position.
   Hardware Switch: [Nintendo Switch 2] / [PC]
2. Connect the [USB Cable] to the [Nintendo Switch 2 Console] or [Computer].

Turbo Mode / Turbo Hold

Turbo Mode can be adjusted for 3 different speeds.

The following buttons can be set in Turbo Mode or Turbo Hold:

Button A / Button B / Button X / Button Y / L Button / R Button / ZL Button / ZR Button / Left Stick Button / Right Stick Button / Directional Buttons (UP, DOWN, LEFT, or RIGHT)*

*Directional Buttons (UP, DOWN, LEFT, or RIGHT) are not compatible with Turbo Hold mode and can only be used for setting Turbo mode.

Turbo Mode

The button is set to continuously activate the button's function as long as you press the button.

[Visual: Pressing Button A with a 'Turbo' label indicates Turbo Mode.]

Turbo Hold

Continuously activates the button's function without pressing the button.

[Visual: Pressing Button A with a 'Turbo' label indicates Turbo Hold.]

Function LED Status:

• Configuring Turbo Function: Function LED changes color.
• Turbo Function Active: Function LED blinks.

*The Function LED will blink at a frequency corresponding to the Turbo speed.

Configuring Turbo Function

1. Enable Turbo Mode: Press [Turbo Button] + [Button] to be set in Turbo Mode.
2. Enable Turbo Hold: Press [Turbo Button] + [Button pressed in step 1].
3. Disable Turbo (All Buttons): Press [Turbo Button] + [HOME Button].

*The Function LED lights up yellow when Turbo/Turbo Hold and Assign modes are set simultaneously.

*When setting the turbo speed, the Turbo LED will blink at a frequency corresponding to the Turbo speed.

Changing Turbo Speed

Turbo Mode can be adjusted for 3 different speeds: 5 times/sec, 10 times/sec, 20 times/sec.

• Increase Speed by One Level: Press [Turbo Button] + [Right Stick].
• Decrease Speed by One Level: Press [Turbo Button] + [Right Stick].

*Turbo speed is set to 10 times/sec by default.

*Before changing Turbo speed, the analog sticks must return to the neutral position.

Assignment Mode

This function allows you to change button assignments.

Programmable Buttons:

Button A / Button B / Button X / Button Y / Directional Buttons (UP, DOWN, LEFT, or RIGHT) / L Button / R Button / ZL Button / ZR Button / Left Stick / Right Stick / FL Button / FR Button

Defined Functions:

Button A / Button B / Button X / Button Y / Directional Buttons (UP, DOWN, LEFT, or RIGHT) / L Button / R Button / ZL Button / ZR Button / Left Stick / Right Stick / Plus Button / Minus Button / NC (disable button function)

How to Reset Individual Buttons:

In step 2, press the same button as in step 3 to restore default settings for individual buttons.

Restore Default Settings for All Buttons:

From step 2, pressing the [HOME Button] will clear all assigned functions ([Function LED] will turn off).

*When the Function LED lights up, it means the button function has been changed and will remain so until the default button function is restored.

*The Function LED lights up yellow when Turbo/Turbo Hold and Assign modes are set simultaneously.

*If step 2 is not performed after step 1, the Function LED will turn off after four seconds, and the assignment mode will end automatically.

Adjustable Dead Zone

The dead zone for the left or right stick can be adjusted in 3 levels.

*Before moving to the next dead zone level, the analog stick must be set to the neutral position each time.

Specifications

Compliance Information

CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

THE FCC WANTS YOU TO KNOW:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Simplified Declaration of Conformity:

Hereby, HORI declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://hori.co.uk/consumer-information/

For UK:

Hereby, HORI declares that this product is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: https://hori.co.uk/consumer-information/

Product Disposal Information

Where you see this symbol [[WEEE Symbol]] on any of our electrical products or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste.

Warranty Information

HORI warrants to the original purchaser that our product purchased new in its original packaging shall be free of any defects in both material and workmanship for a period of one year from the original date of purchase. If the warranty claim cannot be processed through the original retailer, please contact HORI customer support.

• For customer support in North America and Latin America, please use our customer support form: https://stores.horiusa.com/support/
• For customer support in Europe, please email info@horiuk.com

Warranty Details:

• For North America, LATAM, Australia: https://stores.horiusa.com/policies/
• For Europe & Middle East: https://hori.co.uk/policies/

The image on the packaging may differ from the actual product. The manufacturer reserves the right to change the design or specifications of the product without notice. HORI name and HORI logo are registered trademarks of HORI. All other trademarks are the property of their respective owners. Nintendo. Nintendo Switch is a trademark of Nintendo.