About This Product
Thank you for purchasing the HORI Wired Controller. This manual provides essential information for using the controller with your Nintendo Switch and PC. Please read carefully and keep for future reference.
Safety Precautions: Keep out of reach of children under 3. Avoid dusty or humid areas. Do not use if damaged. Keep away from water and heat sources. Do not disassemble or modify.
Package Contents
- Controller x 1
- Instruction Manual x 1
Compatibility
- Platform: Nintendo Switch / PC (Xinput)
- Supported OS: Windows 10/8~8.1/7
- System Requirements: USB Port, Internet Connection
Ensure your Nintendo Switch system software is up to date.
Controller Layout
Familiarize yourself with the button layout for both Nintendo Switch and PC use.
Nintendo Switch: Left Stick, Right Stick, Control Pad, A, B, X, Y, L, R, ZL, ZR, TURBO, HOME, +, Capture Buttons.
PC (Xinput): Left Stick, Right Stick, Control Pad, A, B, X, Y, LT, RT, LB, RB, TURBO, GUIDE, START, BACK Buttons.
Note: Button functions may vary slightly between platforms.
How to Connect
Insert the USB connector of the controller into a USB port on the Nintendo Switch Dock or your PC.
L/R to ZL/ZR Toggle Function
This feature allows you to switch button functions between L/R and ZL/ZR.
To Activate: Press and hold the ZL and ZR buttons simultaneously while connecting the USB connector. The TURBO LED will turn RED.
To Reset: Repeat the activation process. Settings are saved even after unplugging the controller.
Turbo Functions
Enable continuous rapid fire without holding the button. Compatible buttons include A, B, X, Y, L, R, ZL, ZR, and Control Pad directions.
Setting Turbo Mode: Hold the TURBO button, then press the desired button. The TURBO LED will flash.
Setting Turbo Hold Mode: Hold the TURBO button, then press the desired button twice. The TURBO LED will remain lit.
Disabling Turbo: Press the TURBO button and the desired button again. To disable all Turbo functions, hold the TURBO button and press the SELECT button.
Turbo Speed Adjustment: While holding the TURBO button, push the Right Analog Stick up to increase speed (5, 10, 20 times/sec) or down to decrease speed. The TURBO LED will flash according to the set speed.
Note: Turbo function compatibility may vary by software.
Main Features
- Dimensions: 103mm x 141mm x 69mm
- Cable Length: Approximately 3 m
- Weight: About 230g
- Rating: 5V 45mA
- Note: This is a wired controller and does not feature vibration.
Additional Information
HORI & HORI logo are registered trademarks of HORI. Nintendo Switch logo and Nintendo Switch are trademarks of Nintendo. Target age: 6 years and over.
