NorStone Rotative Wall Mount for Sonos Era 300

Instruction Manual

Product Overview

This document provides instructions for installing the NorStone Rotative Wall Mount, specifically designed for the Sonos Era 300 speaker. The mount allows for adjustable positioning of the speaker.

Key Features:

✅ Compatible with Sonos Era 300 speakers.
⚖️ Maximum weight capacity indicated (specific value not provided in diagrams).
↔️ Swivel adjustment up to ±45 degrees.
↕️ Tilt adjustment from 0 to -18 degrees.

For more information, visit www.norstone-design.com.

Included Parts

The following parts are included in the package:

A (x1): Main mounting plate/arm
B (x1): Wall bracket
C (x1): Speaker attachment plate
D (x2): M5x16 screws
E (x3): ST4.8x38 screws (for wood wall installation)
F (x3): Ø8x36 anchors (for concrete/brick wall installation)

Installation Instructions

Ensure you have the correct tools and hardware for your wall type before proceeding.

Step 1: Mount the Wall Bracket (B)

1a. Wood Wall Installation

Position the wall bracket (B) on the wooden wall. Mark the hole locations. Pre-drill pilot holes using a 3.5mm (01/8") drill bit. Ensure the mounting points are at least 50mm (2") deep. Secure the wall bracket (B) to the wood wall using three ST4.8x38 screws (E).

[Diagram Description: Shows bracket B being held against a wooden wall. Steps include marking holes, pre-drilling with a 3.5mm drill bit, and attaching bracket B using screws E (ST4.8x38). A measurement indicates 50mm (2") depth for mounting.]

1b. Solid Concrete / Brick Wall Installation

Position the wall bracket (B) on the solid wall. Mark the hole locations. Pre-drill holes using an 8mm (05/16") drill bit. Insert three Ø8x36 anchors (F) into the drilled holes. Secure the wall bracket (B) to the wall by screwing through the bracket and into the anchors using three ST4.8x38 screws (E). Ensure the mounting points are at least 50mm (2") deep.

[Diagram Description: Shows bracket B being held against a concrete/brick wall. Steps include marking holes, pre-drilling with an 8mm drill bit, inserting anchors F (Ø8x36), and attaching bracket B using screws E (ST4.8x38). A measurement indicates 50mm (2") depth for mounting.]

Step 2: Attach the Main Mounting Plate (A)

Align the main mounting plate/arm (A) with the wall bracket (B) that is now secured to the wall. Use two M5x16 screws (D) to attach the main mounting plate (A) to the wall bracket (B).

[Diagram Description: Shows the main mounting plate A being attached to the wall bracket B using two M5x16 screws D. A Sonos Era 300 speaker is depicted nearby, illustrating its intended position.]

Step 3: Mount the Speaker and Adjust Position

Attach the Sonos Era 300 speaker to the main mounting plate (A). The specific attachment method for the speaker to plate A is implied. Once the speaker is mounted, you can adjust its position.

The mount allows for:

Rotation (Swivel): Up to ±45 degrees.
Tilt: From 0 degrees to -18 degrees.

[Diagram Description: Shows the speaker mounted on plate A. Arrows indicate the ability to swivel the speaker mount left and right (±45°) and tilt it downwards (0° to -18°). Icons representing these angles are displayed.]

Safety and Compatibility

This mount is designed for the Sonos Era 300 speaker. Ensure the wall structure is capable of supporting the weight of the speaker and mount. Always follow safe installation practices.